Skip to Content

Tag: recycling

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Making Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Making Machine

Plastic Recycling Making Machine India

Plastic Recycling Making Machine Manufacturer

Plastic Recycling Making Machine Manufacturer India

Plastic Recycling Making Machine Plant

Plastic Recycling Making Machine Line

Plastic Recycling Making Machine Unit

Plastic Recycling Making Machine Export

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Manufacturer in Ahmedabad

#Plastic#Recycling#Making#Machine#

 

 

Plastic Recycling Making Machine

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Making Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Making Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Making Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Making Machine:

PET

Main article: Plastic Recycling Making Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

 

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Recycling Making Machine:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Making Machine

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Recycling Making Machine and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Machine in India

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Machine in India

Plastic Recycling Machine in India Manufacturer

Plastic Recycling Machine in India Plant

Plastic Recycling Machine in India Line

Plastic Recycling Machine in India Unit

Plastic Recycling Machine in India Export

Plastic Recycling Making Machine in India 

Plastic Recycling Making Machine India 

Plastic Recycling Making Machine in Ahmedabad

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine manufacturer India

Plastic Recycling Machine Manufacturer in Ahmedabad 

#Plastic#Recycling#Machine#in#India#

 

 

Plastic Recycling Machine in India

 

Plastic Recycling Machine in India such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Machine in India is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Machine in India includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Machine in India:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Machine in India:

PET

Main article: Plastic Recycling Machine in India

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Machine in India

This Plastic Recycling Machine in India is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE Plastic Recycling Machine in India are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Machine

Plastic Recycling Machine India

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine in India

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Plant

Plastic Recycling Machine Line

Plastic Recycling Machine Unit

Plastic Recycling Machine Export

Plastic Recycling Making Machine

Plastic Recycling making Machine in India

Plastic Recycling Making Machine in Ahmedabad

Plastic Recycling Machine Manufacturer in Ahmedabad

Plastic Recycling Machine in Ahmedabad

#Plastic#Recycling#Machine#

 

Plastic Recycling Machine

 

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Machine:

PET

Main article: Plastic Recycling Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Application of Plastic Recycling Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Re Process Plant

This Plastic Recycling Machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Plastic Recycling Machine is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this Plastic Recycling Machine stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Extruder for Waste Plastic Recycling

December 5, 2017 • Mrunal Ramanuj

Extruder for Waste Plastic Recycling

Extruder for Waste Plastic Recycling India

Extruder for Waste Plastic Recycling Manufacturer

Extruder for Waste Plastic Recycling Exporter

Extruder for Waste Plastic Recycling Machine

Extruder for Waste Plastic Recycling Line

Extruder for Waste Plastic Recycling Plant

Extruder for Waste Plastic Recycling Unit

Extruder for Waste Plastic Recycling Machine India

Plastic Recycling Machine

Plastic Recycling Machine Manufacturer

Plastic Extrusion Recycling Machine

Plastic Waste Recycling Machine

Plastic Dana Making Machine

Plastic Processing Machine

Plastic Extruder Machine India

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine.

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

Plastic Waste Recycling Machine Line

December 2, 2017 • Mrunal Ramanuj

Plastic Waste Recycling Machine Line

Plastic Waste Recycling Machine Line India

Plastic Waste Recycling Machine Line Exporter

Plastic Waste Recycling Machine Line Manufacturer

Plastic Waste Recycling Machine Line Plant

Plastic Waste Recycling Machine Line Unit Plant

Plastic Waste Recycling Machine Line in India

Die Face Cutter Recycling Plant

Plastic Granules Making Machine

Plastic Reprocess Granules Making Machine

Plastic Processing Machine

Plastic Recycling Machine India

Plastic Extrusion Machine

Plastic Dana Machinery

Waste Processing Granules Making Machine 

Plastic Granules Machine Manufacturer

Plastic Dana Plant

Plastic Recycling Granules Making Machinery

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

 

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Features:

  • Longer functional life
  • Rugged in construction
  • Operationally fluent

Specifications:

Plant
Model
Screw
Size
(mm)
Screw
Size
L7d ratio
Feed
Section
Type
Max
Prod capacity
(kgs/hour)
Total
Connected
Load
(kw w/ogrinder)
Polymer Main
Drive
(hp)
Dimension
(feet)
L M H
Oesrp100 80 24:01:00 Smooth feed 100 36 Pet 25 40 6 18
Oesrp100 90 0 Smooth feed 150 0 Pet 40 45 6 20
Oesrp100 100 0 Smooth feed 200 0 Pet 50 45 6 20

 

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office : 
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

Pelletizing Recycling Granulating Plant

November 8, 2017 • Mrunal Ramanuj

Pelletizing Recycling Granulating Plant

Pelletizing Recycling Granulating Plant India

Pelletizing Recycling Granulating Plant Exporter

Pelletizing Recycling Granulating Plant Manufacturer

Pelletizing Recycling Granulating Plant Line

Pelletizing Recycling Granulating Plant Manufacturer in India

Pelletizing Recycling Granulating Plant Machine

Plastic Dana Making Machine

Plastic Granules Making Machine

Plastic Reprocess Dana Making Machine

Plastic Recycling Machine Exporter

Plastic Processing Machine in India

Plastic Reprocess Granules Making Line

Plastic Machine Manufacturer

Plastic Extrusion Machine India

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Blessed with a formidable infrastructure, our adroit professionals with an aid of our technological advancements leaving no space space of error, bring-forth an astonishing Plastic Recycling Machine that can be availed with 80, 90 and 100mm screw size.

Specifically engineered in adherence to the predefined industry guidelines, these machines are applauded for their excellent production rate of 100, 150 and 200 kgs/hour. Before the final transmission, the range is tested on multiple parameters.

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Features:

  • Longer functional life
  • Rugged in construction
  • Operationally fluent


Specifications:

Plant
Model
Screw
Size
(mm)
Screw
Size
L7d ratio
Feed
Section
Type
Max
Prod capacity
(kgs/hour)
Total
Connected
Load
(kw w/ogrinder)
Polymer Main
Drive
(hp)
Dimension
(feet)
L M H
Oesrp100 80 24:01:00 Smooth feed 100 36 Pet 25 40 6 18
Oesrp100 90 0 Smooth feed 150 0 Pet 40 45 6 20
Oesrp100 100 0 Smooth feed 200 0 Pet 50 45 6 20

 

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

Waste Plastic Recycling Granulating Production Line Machine

November 7, 2017 • Mrunal Ramanuj

Waste Plastic Recycling Granulating Production Line Machine

Waste Plastic Recycling Granulating Production Line Machine India

Waste Plastic Recycling Granulating Production Line Machine Plant

Waste Plastic Recycling Granulating Production Line Machine Exporter

Waste Plastic Recycling Granulating Production Line Machine Manufacturer

Waste Plastic Recycling Machine

Plastic Recycling Machine Exporter

Plastic Dana making Machine

Plastic Recycling Plant

Plastic Processing Machinery

Plastic Processing Machinery

Plastic Reprocess Granules Making Machine

Plastic Extrusion Machine Manufacturer

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications

PET

Main article: PET bottle recycling

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

Plastic Recycling Pelletizer Plant 

November 6, 2017 • Mrunal Ramanuj

Plastic Recycling Pelletizer Plant 

Plastic Recycling Pelletizer Plant India

Plastic Recycling Pelletizer Plant Exporter

Plastic Recycling Pelletizer Plant Manufacturer

Plastic Recycling Pelletizer Plant Line

Plastic Recycling Pelletizer Plant Machine

Plastic Recycling Pelletizer Plant Unit

Plastic Recycling Pelletizer Plant Manufacturer in India

Plastic Recycling Pelletizer Plant Process

Plastic Recycling Pelletizer Plant Equipment

Plastic Recycling Pelletizer Plant in India

Plastic Recycling Machine

Plastic Reprocess Dana Making Plant

Plastic Granules Making Machine

Plastic Dana Plant

Recycling Dana Making in India

Plastic Granulation Plant

Plastic Processing Equipment

LD PP Dana Making Machine

LD PP Granules Making Machine

Granules Making Machine

Dana Making Machine in Gujarat

Recycling Machine in India

Recycling Machine Exporter

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany,
Turkey
, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Factory Add : 

Ocean Extrusions Pvt Ltd 
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office : 

Ocean Extrusions Pvt Ltd 
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web: 
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

PP HM LD Recycling Plant

October 26, 2017 • Mrunal Ramanuj

PP HM LD Recycling Plant

PP HM LD Recycling Plant India

PP HM LD Recycling Plant Exporter

PP HM LD Recycling Plant Machine

PP HM LD Recycling Plant Manufacturer

PP HM LD Recycling Plant
Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

PP HM LD Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of plastic pollution.

PP HM LD Recycling Plant includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of dyes, fillers, and other additives in plastics. The polymer is generally too viscous to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of PP HM LD Recycling Plant

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.
PP HM LD Recycling Plant

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

 

LD PP Waste Washing Line

September 22, 2017 • Mrunal Ramanuj

LD PP Waste Washing Line

LD PP Waste Washing Line India

LD PP Waste Washing Line Exporter

LD PP Waste Washing Line Manuafacturer

LD PP Waste Washing Line Plant

Ocean Extrusions Pvt Ltd is a leading plastic Extrusion machinery Manufacturer & Exporter. Our sophisticated Engineering team and management team designed, tested, and constantly improved our Plastic Recycling Machinery.

The designs of the machinery are optimized based on invaluable feedback from experienced plastic recycling professionals. Each piece of component is meant for better and safer user experience and efficient production. We have sold equipment to domestic and international companies in the Plastic Industry.

The products we offer are provided are as per the exact requirements of our prestigious patrons. We also offer our products in accordance with the global quality standard and guidelines. so as to provide comfort and convenience to our clients. Due to our team of experienced professionals, ethical business policies and transparency in business dealings, we have gained confidence of numerous customers across the country.

We have one of the largest manufacturing units of these products in India and are acclaimed for quality of our products. Our products are manufactured using premium quality hand plucked natural products. The diversified clientele around the world is the proof of quality and satisfactory products.

Ocean Extrusions Pvt Ltd introduces a line capable of sorting, grinding, washing and cleaning with drying post consumer plastic waste. The end use of the plastic waste is supposed to be either in the field of injection molding textile fiber, monofilament or sheet with different thickness for thermoforming. The complete line is for an accurate clearing of plastic material specially suited for LLDPE, LDPE, HDPE, PP, PET, Etc.

OEPL’s washing line are build with the best materials for less wearing of the bodies of the machine and consequentially less maintenance and less lost in time. Also the experience of OEPL has developed with a better price.

OEPL’s engineering department can give to their customers the support on finding also a customized solution, because OEPL know that every country has his own traditions and his own post consumer material to treat. For this we will be glad to give you the right solution for your business.

The PE/PP film washing line is used to crush, wash and dry the waste plastic PE/PP films, for example, package films, Agricultural films, plastic mulch, plastic films bags and woven bags.

By the processing of PE/PP film washing line, the dirties such as sands, soil and mud can be washed out well. And the clean films can be used for plastic pelletizing directly.

1, high working efficiency, less energy consumption; high automation, less man power.

2, heavy crusher with 10pcs rotary blades efficient cutting

3, By multiple friction washing and rinsing washing, the dirty such oil contamination and mud can be washed out fully.

4, reasonable flowchart design for convenient operation and lower maintenance cost.

5, whole solution for sewage water recycling.

6, the rinsing tank, screw feeders, pipelines are made of stainless steel.

At present, we have the standard models with capacities from 200kg/hr to 1000kg/hr for the plastic pe/pp film washing line, But the final proposal maybe some different because of the different materials conditions.

Product capacity 300kg/h 500kg/h 1000kg/h 1500kg/h
Workshop(L*W*H) 40m*7.5m*6m 42m*10m*6m 70m*12m*6m 75m*15m*6m
Needed worker 3-4 persons 5-6persons 7-8persons 10-12persons
Water supply

(recycle use)

2-3ton/h 3-5ton/h 7-10ton/h 10-15ton/h
 

 

 

Final product

Moisture: max 1%

Bulk density: 0.3G/CM3

Particle size: 10-18mm

Metal content: max.20ppm

Floatable contamination: less than 200ppm

Total impurity: 100-320ppm

 

PE Extrusion Lamination Coating Machine PE coating machine, PE film laminating machine

February 11, 2017 • Mrunal Ramanuj

PE Extrusion Lamination Coating Machine PE coating machine, PE film laminating machine 

Introduction:

High density polyethylene of HDPE woven sacks have become a versatile commodity in the
packaging industry. Introduced for the first time in India during the year 1969 it has over the years
replaced the conventional jute bags to a large exte`nt. HDPE sacks have an edge over the
conventional jute sacks in the sense that the former are light in weight, strong and attractive.
These sacks are immune to the effect of corrosion, decay, moisture, atmosphere, rats, rodents,
moths and insects. Being superior in quality and economic to the traditional jute material, these
modern sacks have gradually captured a large market for packing fertilizers, chemicals, food
stuffs, animal foods, oil cakes etc. Sacks made of HDPE are laminated with low density
polyethylene inside it. This gives protection against moisture, air and the material packed cannot
penetrate out of the sack.

Market Potential:
The primary requirement of sacking in India is for packaging of fertilizers, pesticides, chemicals,
oil seeds and good grains. The total demand at present is estimated to be around 3000 million
sacks per annum. The current sales of HDPE resins for woven sacks is around 20,000 M.T.A. or
approximately 154 million sacks. For jute sacking the sales is around 12 lakh tones per annum or
2460million sacks. This still leaves a deficit of about 400 million sacks. Therefore, HDPE sacks
rather than competing with jute sacks would on the contrary supplement the existing deficit in
sacks.

The main consumer for HDPE woven sacks in the N.E. Region at present is the Hindustan
Fertilizer Corporation Ltd., (HFC), Namrup. The HFC (Stage-I, II & III) has at present an installed
capacity of around 10,00,000 tonnes of Urea and Ammonia Sulphate per annum. On an average
the actual production works out to about 80% of the installed capacity or to about 8,00,000 tonnes
of Ammoniam Sulphate and Urea per annum. The fertilizer produce is packed in bags or sacks in
the quantity of 50 Kgs. or 0.05 tonnes per bag or sack. On this basis the total requirement of bags
or sacks is 160,00,000 Nos. per annum. Out of this requirement more than 50% (80,00,000 Nos.)
is HDPE woven sacks.

At present there is no unit manufacturing laminated HDPE woven sacks in Assam or in any part
of the N.E. Region. As a result the full requirement of laminated HDPE woven sacks are supplied
by manufacturer’s from outside the state and region. Thus 2 – 3 Nos. of laminated HDPE woven
sacks manufacturing units can come up preferably in the states of Assam and Nagaland.

Plant Capacity:
The production basis for a typical tiny unit would be as under:

Working hours/day : 8 (1 shift)
Working days in a year : 300
Annual Production capacity : 7,00,000 Nos.of laminated
HDPE woven sacks.pantai kuta bali

The unit has been assumed to operate at 70%, 80% and 90% of its installed capacity in the first,
second and third year and onwards of its operation.

Raw Material:
The main raw material required for manufacturing laminated HDPE woven sacks is HDPE of GF
– 7745 F grades. The other chemicals required are LDPE (18 LA 060 grade) and colour for
printing. LDPE is used in the laminating process or in the extraction coating process in providing
a lining of LDPE to the woven material. The colour is utilized in printing the name of the unit etc.
whose product is to be packed. The annual requirement of HDPE, LDPE and colour at 100%
capacity utilization is as follows:
HDPE : 80,000 Kg.
LDPE : 23,000 Kg.
Colour : Rs. 0.50 per Kg. HDPE requirement

 

BANNER RAFFIA

 

Plastic Recycling Washing Line

January 26, 2017 • Mrunal Ramanuj

Plastic Recycling Washing Line

Ocean Extrusions Pvt Ltd is a leading plastic Extrusion machinery Manufacturer & Exporter. Our sophisticated Engineering team and management team designed, tested, and constantly improved our Plastic Recycling Machinery.

The designs of the machinery are optimized based on invaluable feedback from experienced plastic recycling professionals. Each piece of component is meant for better and safer user experience and efficient production. We have sold equipment to domestic and international companies in the Plastic Industry.

By the processing of PE/PP film washing line, the dirties such as sands, soil and mud can be washed out well. And the clean films can be used for plastic pelletizing directly.

1, high working efficiency, less energy consumption; high automation, less man power.

2, heavy crusher with 10pcs rotary blades efficient cutting

3, By multiple friction washing and rinsing washing, the dirty such oil contamination and mud can be washed out fully.

4, reasonable flowchart design for convenient operation and lower maintenance cost.

5, whole solution for sewage water recycling.

6, the rinsing tank, screw feeders, pipelines are made of stainless steel.

At present, we have the standard models with capacities from 200kg/hr to 2000kg/hr for the plastic pe/pp film washing line, But the final proposal maybe some different because of the different materials conditions.

Product capacity 300kg/h 500kg/h 1000kg/h 1500kg/h
Workshop(L*W*H) 40m*7.5m*6m 42m*10m*6m 70m*12m*6m 75m*15m*6m
Needed worker 3-4 persons 5-6persons 7-8persons 10-12persons
Water supply

(recycle use)

2-3ton/h 3-5ton/h 7-10ton/h 10-15ton/h
Final product Moisture: max 1%

Bulk density: 0.3G/CM3

Particle size: 10-18mm

Metal content: max.20ppm

Floatable contamination: less than 200ppm

Total impurity: 100-320ppm