Skip to Content

Tag: OEPL

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Biodegradable Bag Making Machine in Ahmedabad

June 25, 2018 • Mrunal Ramanuj

Manufacturer by Ocean Extrusions Pvt. Ltd.,



Biodegradable Bag Making Machine in Ahmedabad
Biodegradable Bag Making Machine in Ahmedabad India
Biodegradable Bag Making Machine in Ahmedabad Plant
Biodegradable Bag Making Machine in Ahmedabad Line
Biodegradable Bag Making Machine in Ahmedabad Unit
Biodegradable Bag Making Machine in Ahmedabad Export
Biodegradable Bag Making Machine in Ahmedabad Manufacturer
Biodegradable Bag Making Machine in Ahmedabad on Google
Biodegradable Bag Making Machine in Ahmedabad on Youtube
Biodegradable Bag Making Machine in Ahmedabad on twitter
Biodegradable Bag Making Machine in Ahmedabad on Facebook
Biodegradable Bag Making Machine in Ahmedabad Manufacturer Plant
Biodegradable Bag Making Machine in Ahmedabad Manufactutrer Line
Biodegradable Bag Making Machine in Ahmedabad Manufacturer Ocean Extrusions Pvt. Ltd.,


Biodegradable Bag Making Machine in Ahmedabad
Biodegradable Bag Making Machine in Ahmedabad is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Bag Making Machine in Ahmedabad, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.



Feature of Biodegradable Bag Making Machine in Ahmedabad :-
Biodegradable Bag Making Machine in Ahmedabad, an excellent solution for maximum cost-effectiveness, provides following benefits:
Increasing flexibility and shortening production schedule, particularly for special formulations.
High throughput.
Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
Increasing number of potential raw material suppliers.
Lower production cost.


For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


Advantages Of Biodegradable Bag Making Machine in Ahmedabad :-
According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
Capability of making multi-layer as well as multi-functional structures that too in a single pass
Reduction in the number of steps required in general extrusion process
Provides targeted performance with the use of definite polymers in particular layers
Reduction in setup and trim scrap
Potential for use of a recycle layer


Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/


Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Biodegradable Bag Making Machine India

June 25, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



Biodegradable Bag Making Machine India
Biodegradable Bag Making Machine India in Ahmedabad
Biodegradable Bag Making Machine India Plant
Biodegradable Bag Making Machine India Line
Biodegradable Bag Making Machine India Manufactrurer
Biodegradable Bag Making Machine India Manufacturer in Ahmedabad
Biodegradable Bag Making Machine India Manufacturer Plant
Biodegradable Bag Making Machine India Manufacturer Line
Biodegradable Bag Making Machine India Manufacturer in Ahmedabad
Biodegradable Bag Machine India Manufacturer
Biodegradable Plastic Bag Making Machine India
Biodegradable Bag Making Machine India Manufacturer Ocean Extrusions Pvt. Ltd.,


Biodegradable Bag Making Machine India
Biodegradable Bag Making Machine India is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Bag Making Machine India, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.



Feature of Biodegradable Bag Making Machine India :-
Biodegradable Bag Making Machine India, an excellent solution for maximum cost-effectiveness, provides following benefits:
Increasing flexibility and shortening production schedule, particularly for special formulations.
High throughput.
Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
Increasing number of potential raw material suppliers.
Lower production cost.


For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


  • Advantages Of Biodegradable Bag Making Machine India :-
  • According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer


Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Biodegradable Bag Making Machine

June 25, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.



  • Biodegradable Bag Making Machine

  • Biodegradable Bag Making Machine India
  • Biodegradable Bag Making Machine in Ahmedabad
  • Biodegradable Bag Making Machine Plant
  • Biodegradable Bag Making Machine Line
  • Biodegradable Bag Making Machine Manufacturer
  • Biodegradable Bag Making Machine Manufacturer India
  • Biodegradable Bag Making Machine Manufacturer in Ahmedabad
  • Biodegradable Bag Making Machine Plant Line
  • Biodegradable Bag Making Machine on Google
  • Biodegradable Bag Making Machine on Youtube
  • Biodegradable Bag Making Machine on twitter
  • Biodegradable Bag Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,


  • Biodegradable Plastic Bag Making Machine
  • Biodegradable Plastic Bag Making Machine is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Plastic Bag Making Machine, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.

  • Feature of Biodegradable Plastic Bag Making Machine :-
  • Biodegradable Plastic Bag Making Machine, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.


  • For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


  • Advantages Of Biodegradable Plastic Bag Making Machine :-
  • According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer

  • Factory Add : –
  • Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahmedabad, Gujarat, INDIA – 382430

  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd
  • B-101, First Floor,
  • Galaxy Business Park,
  • Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Fertilizer Plastic Bag Making Machine

June 12, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,


  • Fertilizer Plastic Bag Making Machine
  • Fertilizer Plastic Bag Making Machine India
  • Fertilizer Plastic Bag Making Machine in Ahmedabad
  • Fertilizer Plastic Bag Making Machine Plant
  • Fertilizer Plastic Bag Making Machine Line
  • Fertilizer Plastic Bag Making Machine Manufacturer
  • Fertilizer Plastic Bag Making Machine Manufacturer India
  • Fertilizer Plastic Bag Making Machine Manufacturer in Ahmedabad
  • Fertilizer Plastic Bag Making Machine Unit
  • Fertilizer Plastic Bag Making Machine Export


Biodegradable Plastic Bag Making Machine

Biodegradable Plastic Bag Making Machine is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Plastic Bag Making Machine, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.



  • Feature of Biodegradable Plastic Bag Making Machine :-

  • Biodegradable Plastic Bag Making Machine, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.

  • For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


  • Advantages Of Biodegradable Plastic Bag Making Machine :-

  • OEPL According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Biodegradable Bag Making Machine Manufacturer

June 12, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



  • Biodegradable Bag Making Machine Manufacturer

  • Biodegradable Bag Making Machine Manufacturer India
  • Biodegradable Bag Making Machine Manufacturer in Ahmedabad
  • Biodegradable Bag Making Machine Manufacturer Plant
  • Biodegradable Bag Making Machine Manufacturer Line
  • Biodegradable Bag Making Machine Manufacturer Unit
  • Biodegradable Bag Making Machine Manufacturer Export
  • Biodegradable Bag Making Machine Plant
  • Biodegradable Bag Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,


Biodegradable Bag Making Machine Manufacturer

Biodegradable Bag Making Machine Manufacturer is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Bag Making Machine Manufacturer, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.


  • Feature of Biodegradable Bag Making Machine Manufacturer :-

  • Biodegradable Bag Making Machine Manufacturer, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.


  • For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness

  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible

  • Advantages Of Biodegradable Bag Making Machine Manufacturer :-
  • OEPL According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Biodegradable Bag Making Machine

June 11, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



  • Biodegradable Bag Making Machine

  • Biodegradable Bag Making Machine India
  • Biodegradable Bag Making Machine in Ahmedabad
  • Biodegradable Bag Making Machine Plant
  • Biodegradable Bag Making Machine Line
  • Biodegradable Bag Making Machine Manufacturer
  • Biodegradable Bag Making Machine Unit
  • Biodegradable Bag Making Machine Export
  • Biodegradable Bag Making Machine Manufacturer India
  • Biodegradable Bag Making Machine Manufacturer in Ahmedabad
  • Biodegradable Bag Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

 



  • Biodegradable Bag Making Machine

  • Biodegradable Bag Making Machine is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Bag Making Machine, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.


  • Feature of Biodegradable Bag Making Machine :-

  • Biodegradable Bag Making Machine, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.

  • For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


  • Advantages Of Biodegradable Bag Making Machine:-

  • According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer

Biodegradable Plastic Bag Making Machine

June 11, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



  • Biodegradable Plastic Bag Making Machine

  • Biodegradable Plastic Bag Making Machine India
  • Biodegradable Plastic Bag Making Machine in Ahmedabad
  • Biodegradable Plastic Bag Making Machine Plant
  • Biodegradable Plastic Bag Making Machine Line
  • Biodegradable Plastic Bag Making Machine Manufacturer
  • Biodegradable Plastic Bag Making Machine Manufacturer in Ahmedabad
  • Biodegradable Plastic Bag Making Machine Manufacturer India
  • Biodegradable Plastic Bag Making Machine Unit
  • Biodegradable Plastic Bag Making Machine Export
  • Biodegradable Plastic Bag Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

Biodegradable Plastic Bag Making Machine

Biodegradable Plastic Bag Making Machine is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Plastic Bag Making Machine, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.



  • Feature of Biodegradable Plastic Bag Making Machine :-

  • Biodegradable Plastic Bag Making Machine, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.


  • For this process, OEPL must have similar melt to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness

  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


  • Advantages Of Biodegradable Plastic Bag Making Machine :-

  • According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer

Cast Film Making Machine India

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,


  • Cast Film Making Machine India
  • Cast Film Making Machine India in Ahmedabad
  • Cast Film Making Machine India Manufacturer
  • Cast Film Making Machine India Plant
  • Cast Film Making Machine India Line
  • Cast Film Making Machine India Unit
  • Cast Film Making Machine India Export
  • Cast Film Making Machine India Manufacturer India
  • Cast Film Making Machine India Manufacturer in Ahmedabad
  • Cast Film Making Machine India Manufacturer By Ocean Extrusions Pvt. Ltd.,
  • Cast Film Making Machine India Plant Manufacturer


  • Cast Film Making Machine India
  • Cast Film Making Machine India is the process that allows the Cast Film Making Machine India to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine India is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine India brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine India is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Cast Film Making Machine India:
  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability


  • Standard Sizes Available of Cast Film Making Machine India:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Cast Film Making Machine India technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Cast Film Making Machine India units and of course for winding of films.

 



  • applications:

  • 3, 5 and 7 layer films
  • films for pallet Cast Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-Cast Film
  • cling film

Cast Film Making Machine

June 9, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Cast Film Making Machine
  • Cast Film Making Machine India
  • Cast Film Making Machine in Ahmedabad
  • Cast Film Making Machine Manufacturer
  • Cast Film Making Machine Plant
  • Cast Film Making Machine Line
  • Cast Film Making Machine Manufacturer India
  • Cast Film Making Machine Manufacturer in Ahmedabad
  • Cast Film Making Machine Unit
  • Cast Film Making Machine Export


  • Cast Film Making Machine

  • Cast Film Making Machine is the process that allows the stretch film to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.


  • The results are clear:

  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability

  • Standard Sizes Available :
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to the cast film technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, Cast Film Making Machine units and of course for winding of films.

  • applications:

  • 3, 5 and 7 layer films
  • films for pallet Cast Film (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-stretch
  • cling film

Extrusions Lamination Machine

June 8, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Extrusions Lamination Machine
  • Extrusions Lamination Machine India
  • Extrusions Lamination Machine in Ahmedabad
  • Extrusions Lamination Machine Plant
  • Extrusions Lamination Machine Line
  • Extrusions Lamination Machine Manufacturer
  • Extrusions Lamination Machine Unit
  • Extrusions Lamination Machine Export
  • Extrusions Lamination Machine Manufacturer India
  • Extrusions Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Lamination Making Machine
  • Extrusions Lamination Making Machine India
  • Extrusions Lamination Making Machine in Ahmedabad
  • Extrusions Lamination Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

Product Description of Extrusions Lamination Machine:-

Co-extrusion is a process of extruding a multi-layer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                          Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die

The advantages of barrier coextrusion are to obtain a multilayer material in one operation and to use only a thin layer of expensive barrier material coextruded with cheaper supports and dry adhesives.  In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.

The first is just the most used in the Industry with Single Extruder and Single Die Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Multiple Extruder and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Normal Single Extruder and Single Die Lamination Plant . There are certain Applications in Extrusion Coating where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Extrusions Coating Lamination Machine Manufacturer

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India
  • Extrusions Coating Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Machine Manufacturer Plant
  • Extrusions Coating Lamination Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Unit
  • Extrusions Coating Lamination Machine Manufacturer Export
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Making Machine Manufacturer India
  • Extrusions Coating Lamination Making Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer Plant
  • Extrusions Coating Lamination Making Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Plant

Product Description of Extrusions Coating Lamination Machine Manufacturer:-


Extrusions Coating Lamination Machine Manufacturer is a process of Extrusions Coating Lamination Machine Manufacturer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                    Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine Manufacturer are to obtain a Extrusions Coating Lamination Machine Manufacturer material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine Manufacturer with cheaper supports and dry adhesives.                                                                                                                                                                                                                                                                                                      In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Manufacturer Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine Manufacturer and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine Manufacturer. There are certain Applications in Extrusions Coating Lamination Machine Manufacturer where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature of Extrusions Coating Lamination Machine Manufacturer:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine Manufacturer:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine Manufacturer:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Extrusions Coating Lamination Machine

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine
  • Extrusions Coating Lamination Machine India
  • Extrusions Coating Lamination Machine in Ahmedabad
  • Extrusions Coating Lamination Machine Plant
  • Extrusions Coating Lamination Machine Line
  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Making Machine
  • Extrusions Coating Lamination Making Machine India
  • Extrusions Coating Lamination Making Machine in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India

  Product Description of Extrusions Coating Lamination Machine:-


Extrusions Coating Lamination Machine is a process of extruding a Extrusions Coating Lamination Machine with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                                                        Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine are to obtain a Extrusions Coating Lamination Machine material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine with cheaper supports and dry adhesives. In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine. There are certain Applications in Extrusions Coating Lamination Machine where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film.


Feature of Extrusions Coating Lamination Machine:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Air Bubble Sheet Machine Manufacturer

April 20, 2018 • Mrunal Ramanuj
  • Air Bubble Sheet Machine Manufacturer
  • Air Bubble Sheet Machine Manufacturer in India
  • Air Bubble Sheet Machine Manufacturer Plant
  • Air Bubble Sheet Machine Manufacturer Line
  • Air Bubble Sheet Machine Manufacturer Unit
  • Air Bubble Sheet Machine Manufacturer Export
  • Air Bubble Sheet Machine Manufacturer in Ahmedabad
  • Air Bubble Sheet Machine Manufacturer India in Ahmedabad
  • #Air #Bubble #Sheet #Machine #Manufacturer

Air Bubble Sheet Machine Manufacturer

Air Bubble Sheet Plant such as Air Bubble Sheet Line, Air Bubble Sheet Making Machine, Bubble Sheet Making Machine, Bubble Film Making Machine, Cushion Film Making Machine, Air Bubble Film Machine and many more items.

Introduction of Air Bubble Sheet Machine Manufacturer;-

Air Bubble Sheet Machine Manufacturer, a flexible and transparent plastic sheting containig numerous small air pockets. The sheets offer cushioning and scratch protection far superior to packing paper and are used to protect items during shipping and storage. Bubble wrap is lightweight, waterresistant, reusablenon-scratching and is used for packing fragile items. It can be used to cushion medium to heavy weight products.

Air Bubble Sheet Machine Manufacturer are considered effective wrapping material in electronic, electrical, glassware, machinery, automobilespare parts, and many more industries. Air bubble sheet line material is soft in texture and the bubble like protruding features protect the products from scratch and damages during various packaging and shipping processes. Air bubble sheet plant is an affordable investment for producing safe stuffing material for brittle as well as heavy products. Air bubble sheet machine can produce sheets of various dimensions and lengt

This Air Bubble Sheet Machine Manufacturer,air bubble film extrusion machine,air bubble film machine
Polyethylene air cushion film (also called polyethylene bubble film), which is divided into two kind: ordinary polyethylene aircushion film and composite polyethylene air cushion film, is a kind of packing material which has been widely used at present.

Air Bubble Sheet Machine Manufacturer,air bubble film extrusion machine,air bubble film machine manufacturers also called air bubble film, bubble wrap, LLDPE air bubble film and so on. it is made of PE , the diameter of our bubble is 6mm,10mm,12mmm,20mm,25mm. the max width can be up to 1800mm. besides , we can made the bubble into 2 layer bubble film , 3 layers bubble film , 5 layers bubble film and other multilayer bubble film .so far , we have developed many lamitated bubble film ,like , EPE foam bubble film , woven bubble film ,kraft bubble film

 

 

Air Bubble Sheet Machine Manufacturer.

The offered product is widely demanded and appreciated by our clients for its brilliant features. Our dexterous professionals manufacture this product, using the finest quality raw material that is totally rust free. In ahead of their final dispatch, this is quality checked by our quality controllers on various parameters set by the industry. Clients can avail the offered range from us at market leading prices.

Features of Air Bubble Sheet Machine Manufacturer:

  • Excellent functionality
  • Consistent performance
  • High strength

Applications of Air Bubble Sheet Machine Manufacturer:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instruments
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

Air Bubble Sheet Machine Manufacturer. This sheet line is developed using top class material and progressive technology in tandem to universally verified standards. Moreover, our offered sheet line is highly appreciated by our clients for its high productivity with less power consumption.

Features of Air Bubble Sheet Machine Manufacturer:

  • Durable finish standard
  • Robust design
  • Long lasting

 

 

Air Bubble Sheet Machine Manufacturer. Our offered machine is manufactured keeping in mind the industry norms by using advance techniques. Furthermore, this machine is known for its user-friendly nature & performance. Offered machine is available in numerous specifications to choose from.

Features of Air Bubble Sheet Machine Manufacturer:

  • Application specific design
  • Long working life
  • Easy maintenance

Air Bubble Sheet Machine Manufacturer. The offered machine is available in various specifications in accordance to the customer’s needs. This machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered machine is examined under the direction of professionals to ensure the flawlessness.


Features of Air Bubble Sheet Machine Manufacturer:

  • Smooth functioning
  • Low maintenance
  • Durability

Application of Air Bubble Sheet Machine Manufacturer:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instrumentsa
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

 

Plastic Bag Making Machine

December 18, 2017 • Mrunal Ramanuj

Plastic Bag Making Machine

Plastic Bag Making Machine India

Plastic Bag Making Machine Manufacturer

Plastic Bag Making Machine Line

Plastic Bag Making Machine Exporter

Plastic Bag Making Machine in India

Plastic Bag Making Machine Exporter in India

Carry Bag Making Machine

Plastic Carry Bag Making Machine

Blown Film Machine India

Blown Film Plant

Blown Film Extrusion Machine India

Plastic Shopping Bag Making Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Plastic Bag Making Machine, Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high – speed plants can give processors the competitive edge and quick return on their investment.

Plastic Bag Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Plastic Bag Making Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, Plastic Bag Making Machine materials can also be produced from this single plant.

Applications of Plastic Bag Making Machine :

  • Film for Shopping Bags
  • Film for Liners
  • Stretch Film
  • Shrink Film
  • Lamination Film
  • Biodegradable Film

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

Box Strapping Roll Making Machine

December 13, 2017 • Mrunal Ramanuj

Box Strapping Roll Making Machine

Box Strapping Roll Making Machine India

Box Strapping Roll Making Machine Manufacturer

Box Strapping Roll Making Machine Line

Box Strapping Roll Making Machine Plant

PP Box Strapping Making Plant

Box Strapping Machine India

Plastic Strap Making Machine

Box Strapping Machine Exporter

Plastic Strap Making Machine India

PP PET Strap Making Line

Box Strapping Patti Making Machine

Box Strap Line

Box Strapping Roll Making Line

Box Strapping Roll Making Plant

Box Strapping Roll Making Unit

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Our firm has a very modern and sprawling infrastructure which has all the latest and sophisticated facilities to manufacture PET box strapping machine plant . These are provided with Helical Gear Box with Inbuilt Thrust Bearing for better performance. Our veteran engineers only use qualitative components and contemporary technology while manufacturing this machine. Besides, we assure our clients that this machine is quality tested against predefined quality parameters, in order to meet international standards.

Features:

  • High performance
  • Require less maintenance
  • Low electricity consumption

Applications:

  • Wooden / Corrugated Box Packing in different industries
  • Textile Cloth Packing
  • Paper Packing
  • Cotton Industry
  • Rice Bag
  • Jute Industry
  • Textile Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry
  • Ceramic Industry

Specifications:

Plant model Screw
Size
(mm)
Strap size (mm) Max
Production
Capacity
(kg/hr)
Total
Connected
Load
Dimension
Of
Plant
\t\vv / L W H
Semi auto
(heat sellable)
Strapping plant
Oesbx 50 50 9,12,16 single lines 35 50 80 5 8
Oesbx 65 65 9,12-lwo lines 16,19-single lines 60 65 90 6 8
Oesbx 75 75 9,12-three lines 16,19-two lines 75 85 100 6 8
Fully auto strapping plant
Oesbx 50 50 9,12-16-single lines 35 60 90 6 10
Oesbx 70 9,12-two lines 16, 19-single lines 60 90 100 6 10
Pet box strapping plant
Oespbx 75 75 9,12-two lines 15,19-single lines 100 145 90 15 20
Oespbx 80 80 9 – three lines 12, 15 – two lines, 19- single line 150 175 95 15 20

PP HDPE PET BOX STRAPPING MACHINEPLASTIC Pet Box Strapping Plant, Pet Box Strap Machine, Pet Strap Line, Pet Strapping Plant, Pet Strapping Production Line Ocean Extrusions PVT LTD Our firm has a very modern and sprawling infrastructure which has all the latest and sophisticated facilities to manufacture High quality pet strap plant. These are provided with Helical Gear Box with Inbuilt Thrust Bearing for better performance. Our veteran engineers only use qualitative components and contemporary technology while manufacturing this machine. Besides, we assure our clients that this machine is quality tested against predefined quality parameters, in order to meet international standards.

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

Film Laminating Adhesives Coating Lamination Machine

November 10, 2017 • Mrunal Ramanuj

Film Laminating Adhesives Coating Lamination Machine

Film Laminating Adhesives Coating Lamination Machine India

Film Laminating Adhesives Coating Lamination Machine Exporter

Film Laminating Adhesives Coating Lamination Machine Line

Film Laminating Adhesives Coating Lamination Machine Manufacturer

Film Laminating Adhesives Coating Lamination Machine Line India

Film Laminating Adhesives Coating Lamination Machine manufacturer in India

Film Laminating Adhesives Coating Lamination Machine Unit

BOPP Tape Coating lamination Machine

Adhesive Tape Making Machine

Self Adhesive Tape Making Machine Line

BOPP Cello Tape Making Machine

Plastic Converting Machinery

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Extrusion-based coating/laminating and adhesive-based film laminating are different manufacturing techniques a converter can use to make a composite construction. The physical properties and performance characteristics of flexible packaging made by extrusion coating and laminating can be identical to that made by film laminating. Many of the major components of the final constructions are also the same. So which technique should be used for a particular product package? The decision is not an easy one, with equipment availability, run length, polymer specifications, and manufacturing efficiencies some of the major variables in this equation.

The performance properties of extruded and adhesive-laminated structures are frequently dependent upon the types of polymeric, adhesive and surface treatment/priming ingredients combined to deliver the intended package performance. Multiple performance criteria such as mechanical properties, gas and moisture barrier properties, sealability, printability and cost will be integrated to satisfy the multiple performance properties of both rigid and flexible packages. Many polymeric materials are thermodynamically incompatible due to differences in their chemical make-up. Combining these materials can create the potential for phase separation and structural degradation. The key is to create a heterogeneous layering within an extrusion or adhesive lamination process so performance properties will not degrade over time.

Adhesive laminates can be made by dry bonding, wet bonding, UV/EB curing and by hot melt adhesion processes. Extrusion laminates are constructed by extruding a thin tie-layer of a plastic material to bond together two dissimilar materials, such as a polymer film, paper or foil. Furthermore, coextruded materials are produced by extruding several polymer layers simultaneously and then pressing/cooling them together. Incompatible layers are laminated together using a thermoplastic adhesive as a tie layer. Eight layers or greater can be produced to optimize barrier, material thickness, weight and cost performance parameters.

The manufacture of film laminates is a continuous process of coating and bonding, with process differentiation defined by the type of adhesive used and how the adhesive is applied and converted.  These processes are classified as either wet or dry laminating processes and are described .

Adhesive coating lamination machine works in terms of electrical heat source. The gravure equipped with adhesive coating lamination plant supports for coating adhesives on labeling and packaging film materials. This is a suitable option to produce variety of packaging films with adhesives applied on it. The heating roller with nip roll keeps the application flawless. Adhesive coating lamination line suits best for fast production of packaging bags with lamination lines.

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

© 2018 oceanextrusions.com All rights reserved.