Skip to Content

Tag: Ocean

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Extrusions Lamination Machine

June 8, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Extrusions Lamination Machine
  • Extrusions Lamination Machine India
  • Extrusions Lamination Machine in Ahmedabad
  • Extrusions Lamination Machine Plant
  • Extrusions Lamination Machine Line
  • Extrusions Lamination Machine Manufacturer
  • Extrusions Lamination Machine Unit
  • Extrusions Lamination Machine Export
  • Extrusions Lamination Machine Manufacturer India
  • Extrusions Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Lamination Making Machine
  • Extrusions Lamination Making Machine India
  • Extrusions Lamination Making Machine in Ahmedabad
  • Extrusions Lamination Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

Product Description of Extrusions Lamination Machine:-

Co-extrusion is a process of extruding a multi-layer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                          Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die

The advantages of barrier coextrusion are to obtain a multilayer material in one operation and to use only a thin layer of expensive barrier material coextruded with cheaper supports and dry adhesives.  In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.

The first is just the most used in the Industry with Single Extruder and Single Die Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Multiple Extruder and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Normal Single Extruder and Single Die Lamination Plant . There are certain Applications in Extrusion Coating where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Extrusions Coating Lamination Machine Manufacturer

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India
  • Extrusions Coating Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Machine Manufacturer Plant
  • Extrusions Coating Lamination Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Unit
  • Extrusions Coating Lamination Machine Manufacturer Export
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Making Machine Manufacturer India
  • Extrusions Coating Lamination Making Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer Plant
  • Extrusions Coating Lamination Making Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Plant

Product Description of Extrusions Coating Lamination Machine Manufacturer:-


Extrusions Coating Lamination Machine Manufacturer is a process of Extrusions Coating Lamination Machine Manufacturer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                    Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine Manufacturer are to obtain a Extrusions Coating Lamination Machine Manufacturer material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine Manufacturer with cheaper supports and dry adhesives.                                                                                                                                                                                                                                                                                                      In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Manufacturer Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine Manufacturer and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine Manufacturer. There are certain Applications in Extrusions Coating Lamination Machine Manufacturer where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature of Extrusions Coating Lamination Machine Manufacturer:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine Manufacturer:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine Manufacturer:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Extrusions Coating Lamination Machine

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine
  • Extrusions Coating Lamination Machine India
  • Extrusions Coating Lamination Machine in Ahmedabad
  • Extrusions Coating Lamination Machine Plant
  • Extrusions Coating Lamination Machine Line
  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Making Machine
  • Extrusions Coating Lamination Making Machine India
  • Extrusions Coating Lamination Making Machine in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India

  Product Description of Extrusions Coating Lamination Machine:-


Extrusions Coating Lamination Machine is a process of extruding a Extrusions Coating Lamination Machine with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                                                        Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine are to obtain a Extrusions Coating Lamination Machine material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine with cheaper supports and dry adhesives. In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine. There are certain Applications in Extrusions Coating Lamination Machine where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film.


Feature of Extrusions Coating Lamination Machine:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Blown Film Line

June 6, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Line
  • Blown Film Line India
  • Blown Film Line in Ahmedabad
  • Blown Film Line Manufacturer
  • Blown Film Line Plant
  • Blown Film Line Unit
  • Blown Film Line Export
  • Blown Film Line Machine Manufacturer
  • Blown Film Line Machine India
  • Blown Film Line Machine in Ahmedabad
  • Blown Film Making Line
  • Blown Film Line Machine Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Line manufacturer Ocean Extrusions Pvt. Ltd.,
  • Ocean Extrusions Pvt. Ltd.,

Blown Film Line Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Line:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

 

  • Feature of Blown Film Line :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

https://www.youtube.com/watch?v=5di_u-s3Hyc

  • Materials of Blown Film Line :-
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Blown Film Line Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Plant

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Blown Film Plant
  • Blown Film Plant India
  • Blown Film Plant in Ahmedabad
  • Blown Film Plant Manufacturer
  • Blown Film Plant Line
  • Blown Film Plant Unit
  • Blown Film Plant Export
  • Blown Film Plant Machine
  • Blown Film Plant Manufacturer
  • Blown Film Plant on Google
  • Blown Film Plant on Youtube
  • Blown Film Plant on twitter
  • Blown Film Plant on Facebook
  • Blown Film Plant Machine in Ahmedabad
  • Blown Film Plant Machine in India

Blown Film Plant Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

Multi Layer Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil.... blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil….
Blown Film Plant pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

  • Blown Film Plant:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Plant :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Plant Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine on Google
  • Blown Film Machine on Youtube
  • Blown Film Machine on twitter
  • Blown Film Machine Plant India
  • Blown Film Machine Plant in Ahmedabad
  • Blown Film Making Machine
  • Blown Film Making Machine India
  • Blown Film Making Machine in Ahmedabad

Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Machine:-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Machine Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine Manufacturer India

June 6, 2018 • Mrunal Ramanuj

Manufacturer by Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine Manufacturer India
  • Blown Film Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Plant
  • Blown Film Machine Manufacturer India Line
  • Blown Film Machine Manufacturer India Manufacturer
  • Blown Film Making Machine Manufacturer India
  • Blown Film Making Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Unit
  • Blown Film Machine Manufacturer India Export
  • Blown Film Machine Manufacturer India Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Machine Manufacturer India Ocean Extrusions Pvt. Ltd.,

Double-Layer Co-Extrusion Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Two Layer Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Two Layer Blown Film Machine :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

  • Materials
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Cast Film Making Machine

April 21, 2018 • Mrunal Ramanuj

 

 

 

  • Cast Film Making Machine
  • Cast Film Making Machine India
  • Cast Film Making Machine Manufacturer
  • Cast Film Making Machine Plant
  • Cast Film Making Machine Line
  • Cast Film Making Machine Unit
  • Cast Film Making Machine Export
  • Cast Film Making Machine in Ahmedabad
  • Cast Film Making Machine India in Ahmedabad
  • Cast Film Making Machine Plant in India
  • Cast Film Making Machine Manufacturer in India
  • Cast Film Making Machine Manufacturer in Ahmedabad
  • #Cast #Film #Making #Machine

 

Cast Film Making Machine produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products. To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films and Blister films.

The Extrusion Cast Sheet Line process is gaining increased popularity and enjoying sustained growth worldwide. New lines are being installed in a significant number and the market segments penetrated by this technology are on the rise. This article identifies the main components of a cast extrusion line and presents the fundamental aspects that require consideration when approaching cast film technology.

 

 

Applications of Cast Film Making Machine:

Cast Film Making Machine are used for food and textiles packaging, flower wrapping, as photo album page protectors, as coating substrates in extrusion coating processes or laminated to other materials in the formation of more complex films, among others. Typically, the cast film process involves the use of coextrusion, which is a simultaneous extrusion of two or more materials from a single die to form a multi-layered film. This is because in many cases the final application of the plastic film demands a performance that cannot be achieved if the film is composed of only one material. For example, in many instances food packaging applications require the use of films with oxygen barrier capabilities. To meet the requirement a high oxygen barrier material like EVOH is combined with polyolefin materials in a multi-layered structure. Coextruded films typically contain up to seven layers; however, the use of more layers is becoming more common. The number of layers, their position in the coextrudate and their individual thickness are all variables that change depending on the particular application of the film.

Benefits/Limitations of Cast Film Making Machine

Unlike the blown film process, the cooling of the film with cast extrusion is highly efficient. This allows for higher production line speeds resulting in higher production rates with superior optical properties of the product. The degree of draw and orientation is significantly lower in the cast film process than in the blown film process. This is the reason why the thickness distribution

in the machine cross direction is more uniform with cast processes (with variations that could be as low as ± 1.5%)

In Cast Film Making Machine the edges of the film are trimmed due to dimensional irregularities and/or poor layer distribution. As a result, the process can be negatively affected if the trimmed material cannot be recycled. Recent flat die system technology has minimized this problem by significantly reducing the amount of wasted material in coextrusion processes. This subject will be covered to some extent in a subsequent section
The table below shows the specifications of these coextruded films. In the structures, EVOH is used to provide the oxygen barrier, the presence of PP as a skin layer facilitates the thermoformability of the film, and the PE used as a skin layer acts as a heat-sealing material. Combining PVdC with EVOH is an effective way to address the potential loss of oxygen barrier capabilities experienced by the EVOH when exposed to moisture like in the case of meat packaging. Nylon material is used in combination with EVOH to provide added barrier when the film is to be thermoformed and the rigidity of the EVOH limits the thickness of the EVOH layer.

Introduction of Cast Film Making Machine
Stretch cling film machine mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.

Double layers PE Cast Film Making Machine Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.

Thickness to be produced: 0.01mm-0.05mm
2. Use: 
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc.
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc.
3) Rotational twist: Rolling paper, carpet etc.
4) Binding: Glass container, acceptance etc.
5) Break-bulk packaging: Soybean, grain, plastic particle etc.
6) Storage packaging: Such as grass.
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc.
8) Ring twist packaging: Type, wire, cable, steel silk etc.

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

 

LLDPE Mono Layer Blown Film Plant

October 13, 2017 • Mrunal Ramanuj

LLDPE Mono Layer Blown Film Plant

LLDPE Mono Layer Blown Film Plant India

LLDPE Mono Layer Blown Film Plant Exporter

LLDPE Mono Layer Blown Film Plant Manufacturer

LLDPE Mono Layer Blown Film Plant Machine

LLDPE Mono Layer Blown Film Plant

 

The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of 
LLDPE Mono Layer Blown Film Plant:

•      Easy installation

•      Rugged design

•      Low maintenance cost

Applications of LLDPE Mono Layer Blown Film Plant:

•      Shopping Bags, Grocery Bags, T-Shirt Bags

•      Liners & Lamination film for aluminum foil, jute paper and board

•      Liner for woven sacks, Cans and other industrial needs

•      Refuse Bags, diaper films, packaging of dairy products

•      Construction Roofing sheet, Green House films

•      Packaging of frozen foods

•      Wrappers for food products, laundry and Garbage bag

•      Heat Sealed sterilized packages for surgical instruments

•      Health care packaging

•      Garment Bags and fresh producing packaging

•      Courier bags

LLDPE Mono Layer Blown Film Plant

Cast Film Making Machine

October 3, 2017 • Mrunal Ramanuj

Cast Film Making Machine

Cast Film Making Machine India

Cast Film Making Machine Manufacturer

Cast Film Making Machine Exporter

Cast Film Making Machine Line

Cast Film Making Machine Manufacturer in India

Cast Line

Stretch Film Making Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany,
Turkey
, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Cast films produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products.

To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films and Blister films.

The Extrusion Cast Sheet Line process is gaining increased popularity and enjoying sustained growth worldwide. New lines are being installed in a significant number and the market segments penetrated by this technology are on the rise. This article identifies the main components of a cast extrusion line and presents the fundamental aspects that require consideration when approaching cast film technology.

Applications:

Cast films are used for food and textiles packaging, flower wrapping, as photo album page protectors, as coating substrates in extrusion coating processes or laminated to other materials in the formation of more complex films, among others. Typically, the cast film process involves the use of coextrusion, which is a simultaneous extrusion of two or more materials from a single die to form a multi-layered film. This is because in many cases the final application of the plastic film demands a performance that cannot be achieved if the film is composed of only one material. For example, in many instances food packaging applications require the use of films with oxygen barrier capabilities. To meet the requirement a high oxygen barrier material like EVOH is combined with polyolefin materials in a multi-layered structure. Coextruded films typically contain up to seven layers; however, the use of more layers is becoming more common. The number of layers, their position in the coextrudate and their individual thickness are all variables that change depending on the particular application of the film.

Benefits/Limitations of Cast Film Extrusion Machine

Unlike the blown film process, the cooling of the film with cast extrusion is highly efficient. This allows for higher production line speeds resulting in higher production rates with superior optical properties of the product. The degree of draw and orientation is significantly lower in the cast film process than in the blown film process. This is the reason why the thickness distribution

in the machine cross direction is more uniform with cast processes (with variations that could be as low as ± 1.5%)

In cast extrusion the edges of the film are trimmed due to dimensional irregularities and/or poor layer distribution. As a result, the process can be negatively affected if the trimmed material cannot be recycled. Recent flat die system technology has minimized this problem by significantly reducing the amount of wasted material in coextrusion processes. This subject will be covered to some extent in a subsequent section
The table below shows the specifications of these coextruded films. In the structures, EVOH is used to provide the oxygen barrier, the presence of PP as a skin layer facilitates the thermoformability of the film, and the PE used as a skin layer acts as a heat-sealing material. Combining PVdC with EVOH is an effective way to address the potential loss of oxygen barrier capabilities experienced by the EVOH when exposed to moisture like in the case of meat packaging. Nylon material is used in combination with EVOH to provide added barrier when the film is to be thermoformed and the rigidity of the EVOH limits the thickness of the EVOH layer.

Factory Add :

Ocean Extrusions Pvt Ltd 
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd 
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web: 
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554