Skip to Content

Tag: Manufacturer

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Fertilizer Plastic Bag Making Machine

June 12, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,


  • Fertilizer Plastic Bag Making Machine
  • Fertilizer Plastic Bag Making Machine India
  • Fertilizer Plastic Bag Making Machine in Ahmedabad
  • Fertilizer Plastic Bag Making Machine Plant
  • Fertilizer Plastic Bag Making Machine Line
  • Fertilizer Plastic Bag Making Machine Manufacturer
  • Fertilizer Plastic Bag Making Machine Manufacturer India
  • Fertilizer Plastic Bag Making Machine Manufacturer in Ahmedabad
  • Fertilizer Plastic Bag Making Machine Unit
  • Fertilizer Plastic Bag Making Machine Export


Biodegradable Plastic Bag Making Machine

Biodegradable Plastic Bag Making Machine is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Plastic Bag Making Machine, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.



  • Feature of Biodegradable Plastic Bag Making Machine :-

  • Biodegradable Plastic Bag Making Machine, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.

  • For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible


  • Advantages Of Biodegradable Plastic Bag Making Machine :-

  • OEPL According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Biodegradable Bag Making Machine Manufacturer

June 12, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



  • Biodegradable Bag Making Machine Manufacturer

  • Biodegradable Bag Making Machine Manufacturer India
  • Biodegradable Bag Making Machine Manufacturer in Ahmedabad
  • Biodegradable Bag Making Machine Manufacturer Plant
  • Biodegradable Bag Making Machine Manufacturer Line
  • Biodegradable Bag Making Machine Manufacturer Unit
  • Biodegradable Bag Making Machine Manufacturer Export
  • Biodegradable Bag Making Machine Plant
  • Biodegradable Bag Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,


Biodegradable Bag Making Machine Manufacturer

Biodegradable Bag Making Machine Manufacturer is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Bag Making Machine Manufacturer, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.


  • Feature of Biodegradable Bag Making Machine Manufacturer :-

  • Biodegradable Bag Making Machine Manufacturer, an excellent solution for maximum cost-effectiveness, provides following benefits:
  • Increasing flexibility and shortening production schedule, particularly for special formulations.
  • High throughput.
  • Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
  • Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
  • Increasing number of potential raw material suppliers.
  • Lower production cost.


  • For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness

  • Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible

  • Advantages Of Biodegradable Bag Making Machine Manufacturer :-
  • OEPL According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
  • High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
  • Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
  • Capability of making multi-layer as well as multi-functional structures that too in a single pass
  • Reduction in the number of steps required in general extrusion process
  • Provides targeted performance with the use of definite polymers in particular layers
  • Reduction in setup and trim scrap
  • Potential for use of a recycle layer
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Cast Film Making Machine Manufacturer

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 


  • Cast Film Making Machine Manufacturer

  • Cast Film Making Machine Manufacturer India
  • Cast Film Making Machine Manufacturer in Ahmedabad
  • Cast Film Making Machine Manufacturer Plant
  • Cast Film Making Machine Manufacturer Line
  • Cast Film Making Machine Manufacturer Unit
  • Cast Film Making Machine Manufacturer Export
  • Cast Film Making Machine Manufacturer Plant India
  • Cast Film Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

Ocean Extrusions Pvt. Ltd.,



  • Cast Film Making Machine Manufacturer
  • Cast Film Making Machine Manufacturer is the process that allows the Cast Film Making Machine Manufacturer to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine Manufacturer is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine Manufacturer brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine Manufacturer is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Cast Film Making Machine Manufacturer:

  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability

  • Standard Sizes Available of Cast Film Making Machine Manufacturer:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Cast Film Making Machine India technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Cast Film Making Machine India units and of course for winding of films.


  • applications:
  • 3, 5 and 7 layer films
  • films for pallet Cast Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-Cast Film
  • cling film

Extrusions Coating Lamination Machine Manufacturer

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India
  • Extrusions Coating Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Machine Manufacturer Plant
  • Extrusions Coating Lamination Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Unit
  • Extrusions Coating Lamination Machine Manufacturer Export
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Making Machine Manufacturer India
  • Extrusions Coating Lamination Making Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer Plant
  • Extrusions Coating Lamination Making Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Plant

Product Description of Extrusions Coating Lamination Machine Manufacturer:-


Extrusions Coating Lamination Machine Manufacturer is a process of Extrusions Coating Lamination Machine Manufacturer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                    Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine Manufacturer are to obtain a Extrusions Coating Lamination Machine Manufacturer material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine Manufacturer with cheaper supports and dry adhesives.                                                                                                                                                                                                                                                                                                      In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Manufacturer Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine Manufacturer and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine Manufacturer. There are certain Applications in Extrusions Coating Lamination Machine Manufacturer where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature of Extrusions Coating Lamination Machine Manufacturer:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine Manufacturer:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine Manufacturer:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Blown Film Line

June 6, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Line
  • Blown Film Line India
  • Blown Film Line in Ahmedabad
  • Blown Film Line Manufacturer
  • Blown Film Line Plant
  • Blown Film Line Unit
  • Blown Film Line Export
  • Blown Film Line Machine Manufacturer
  • Blown Film Line Machine India
  • Blown Film Line Machine in Ahmedabad
  • Blown Film Making Line
  • Blown Film Line Machine Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Line manufacturer Ocean Extrusions Pvt. Ltd.,
  • Ocean Extrusions Pvt. Ltd.,

Blown Film Line Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Line:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

 

  • Feature of Blown Film Line :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

https://www.youtube.com/watch?v=5di_u-s3Hyc

  • Materials of Blown Film Line :-
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Blown Film Line Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Plant

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Blown Film Plant
  • Blown Film Plant India
  • Blown Film Plant in Ahmedabad
  • Blown Film Plant Manufacturer
  • Blown Film Plant Line
  • Blown Film Plant Unit
  • Blown Film Plant Export
  • Blown Film Plant Machine
  • Blown Film Plant Manufacturer
  • Blown Film Plant on Google
  • Blown Film Plant on Youtube
  • Blown Film Plant on twitter
  • Blown Film Plant on Facebook
  • Blown Film Plant Machine in Ahmedabad
  • Blown Film Plant Machine in India

Blown Film Plant Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

Multi Layer Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil.... blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil….
Blown Film Plant pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

  • Blown Film Plant:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Plant :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Plant Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine on Google
  • Blown Film Machine on Youtube
  • Blown Film Machine on twitter
  • Blown Film Machine Plant India
  • Blown Film Machine Plant in Ahmedabad
  • Blown Film Making Machine
  • Blown Film Making Machine India
  • Blown Film Making Machine in Ahmedabad

Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Machine:-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Machine Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine Manufacturer India

June 6, 2018 • Mrunal Ramanuj

Manufacturer by Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine Manufacturer India
  • Blown Film Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Plant
  • Blown Film Machine Manufacturer India Line
  • Blown Film Machine Manufacturer India Manufacturer
  • Blown Film Making Machine Manufacturer India
  • Blown Film Making Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Unit
  • Blown Film Machine Manufacturer India Export
  • Blown Film Machine Manufacturer India Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Machine Manufacturer India Ocean Extrusions Pvt. Ltd.,

Double-Layer Co-Extrusion Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Two Layer Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Two Layer Blown Film Machine :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

  • Materials
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Air Bubble Sheet Machine Manufacturer

April 20, 2018 • Mrunal Ramanuj
  • Air Bubble Sheet Machine Manufacturer
  • Air Bubble Sheet Machine Manufacturer in India
  • Air Bubble Sheet Machine Manufacturer Plant
  • Air Bubble Sheet Machine Manufacturer Line
  • Air Bubble Sheet Machine Manufacturer Unit
  • Air Bubble Sheet Machine Manufacturer Export
  • Air Bubble Sheet Machine Manufacturer in Ahmedabad
  • Air Bubble Sheet Machine Manufacturer India in Ahmedabad
  • #Air #Bubble #Sheet #Machine #Manufacturer

Air Bubble Sheet Machine Manufacturer

Air Bubble Sheet Plant such as Air Bubble Sheet Line, Air Bubble Sheet Making Machine, Bubble Sheet Making Machine, Bubble Film Making Machine, Cushion Film Making Machine, Air Bubble Film Machine and many more items.

Introduction of Air Bubble Sheet Machine Manufacturer;-

Air Bubble Sheet Machine Manufacturer, a flexible and transparent plastic sheting containig numerous small air pockets. The sheets offer cushioning and scratch protection far superior to packing paper and are used to protect items during shipping and storage. Bubble wrap is lightweight, waterresistant, reusablenon-scratching and is used for packing fragile items. It can be used to cushion medium to heavy weight products.

Air Bubble Sheet Machine Manufacturer are considered effective wrapping material in electronic, electrical, glassware, machinery, automobilespare parts, and many more industries. Air bubble sheet line material is soft in texture and the bubble like protruding features protect the products from scratch and damages during various packaging and shipping processes. Air bubble sheet plant is an affordable investment for producing safe stuffing material for brittle as well as heavy products. Air bubble sheet machine can produce sheets of various dimensions and lengt

This Air Bubble Sheet Machine Manufacturer,air bubble film extrusion machine,air bubble film machine
Polyethylene air cushion film (also called polyethylene bubble film), which is divided into two kind: ordinary polyethylene aircushion film and composite polyethylene air cushion film, is a kind of packing material which has been widely used at present.

Air Bubble Sheet Machine Manufacturer,air bubble film extrusion machine,air bubble film machine manufacturers also called air bubble film, bubble wrap, LLDPE air bubble film and so on. it is made of PE , the diameter of our bubble is 6mm,10mm,12mmm,20mm,25mm. the max width can be up to 1800mm. besides , we can made the bubble into 2 layer bubble film , 3 layers bubble film , 5 layers bubble film and other multilayer bubble film .so far , we have developed many lamitated bubble film ,like , EPE foam bubble film , woven bubble film ,kraft bubble film

 

 

Air Bubble Sheet Machine Manufacturer.

The offered product is widely demanded and appreciated by our clients for its brilliant features. Our dexterous professionals manufacture this product, using the finest quality raw material that is totally rust free. In ahead of their final dispatch, this is quality checked by our quality controllers on various parameters set by the industry. Clients can avail the offered range from us at market leading prices.

Features of Air Bubble Sheet Machine Manufacturer:

  • Excellent functionality
  • Consistent performance
  • High strength

Applications of Air Bubble Sheet Machine Manufacturer:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instruments
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

Air Bubble Sheet Machine Manufacturer. This sheet line is developed using top class material and progressive technology in tandem to universally verified standards. Moreover, our offered sheet line is highly appreciated by our clients for its high productivity with less power consumption.

Features of Air Bubble Sheet Machine Manufacturer:

  • Durable finish standard
  • Robust design
  • Long lasting

 

 

Air Bubble Sheet Machine Manufacturer. Our offered machine is manufactured keeping in mind the industry norms by using advance techniques. Furthermore, this machine is known for its user-friendly nature & performance. Offered machine is available in numerous specifications to choose from.

Features of Air Bubble Sheet Machine Manufacturer:

  • Application specific design
  • Long working life
  • Easy maintenance

Air Bubble Sheet Machine Manufacturer. The offered machine is available in various specifications in accordance to the customer’s needs. This machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered machine is examined under the direction of professionals to ensure the flawlessness.


Features of Air Bubble Sheet Machine Manufacturer:

  • Smooth functioning
  • Low maintenance
  • Durability

Application of Air Bubble Sheet Machine Manufacturer:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instrumentsa
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

 

Rotogravure Printing Machine Manufacturer

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine Manufacturer

Rotogravure Printing Machine

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant Manufacturer

Rotogravure Printing Machine Line Manufacturer

Rotogravure Printing Machine Unit Manufacturer

Rotogravure Printing Machine Export Manufacturer

Rotogravure Printing Making Machine

Rotogravure Printing Making Machine in India

Rotogravure Printing making Machine in Ahmedabad

#Rotogravure#Printing#Machine#Manufacturer#

 

 

Rotogravure Printing Machine Manufacturer

The Rotogravure Printing Machine Manufacturer is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine Manufacturer uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine Manufacturer

The layout of a Rotogravure Printing Machine Manufacturer follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine Manufacturer:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine Manufacturer:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

Rotogravure Printing Machine Manufacturer

Process advantages and applications of Rotogravure Printing Machine Manufacturer:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine Manufacturer

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Plastic Recycling Making Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Making Machine

Plastic Recycling Making Machine India

Plastic Recycling Making Machine Manufacturer

Plastic Recycling Making Machine Manufacturer India

Plastic Recycling Making Machine Plant

Plastic Recycling Making Machine Line

Plastic Recycling Making Machine Unit

Plastic Recycling Making Machine Export

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Manufacturer in Ahmedabad

#Plastic#Recycling#Making#Machine#

 

 

Plastic Recycling Making Machine

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Making Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Making Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Making Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Making Machine:

PET

Main article: Plastic Recycling Making Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

 

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Recycling Making Machine:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Making Machine

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Recycling Making Machine and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Machine

Plastic Recycling Machine India

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine in India

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Plant

Plastic Recycling Machine Line

Plastic Recycling Machine Unit

Plastic Recycling Machine Export

Plastic Recycling Making Machine

Plastic Recycling making Machine in India

Plastic Recycling Making Machine in Ahmedabad

Plastic Recycling Machine Manufacturer in Ahmedabad

Plastic Recycling Machine in Ahmedabad

#Plastic#Recycling#Machine#

 

Plastic Recycling Machine

 

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Machine:

PET

Main article: Plastic Recycling Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Application of Plastic Recycling Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Re Process Plant

This Plastic Recycling Machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Plastic Recycling Machine is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this Plastic Recycling Machine stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

PP TQ Blown Film Machine Manufacturer

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Machine Manufacturer

PP TQ Blown Film Machine Manufacturer India

PP TQ Blown Film Machine Manufacturer Plant

PP TQ Blown Film Machine Manufacturer Line

PP TQ Blown Film Machine Manufacturer Unit

PP TQ Blown Film Machine Manufacturer Export

PP TQ Blown Film Machine Manufacturer in Ahmedabad

PP TQ Blown Film Machine Manufacturer in India

#PP#TQ#Blown#Film#Machine#Manufacturer#

 

 

 

PP TQ Blown Film Machine Manufacturer

This extensive range of PP TQ Blown Film Machine Manufacturer include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our PP TQ Blown Film Machine Manufacturer and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Machine Manufacturer are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, PP TQ Blown Film Machine Manufacturer are available with Rotating die.

This PP TQ Blown Film Machine Manufacturer incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Machine Manufacturer. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Machine Manufacturer can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP Blown Film Plant. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Machine Manufacturer:

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Machine Manufacturer:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Machine Manufacturer:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Advantages of PP TQ Blown Film Machine Manufacturer:

  • Low Capital
  • Low Space Requirement
  • Lower Operating Cost
  • Less Demanding Operating Skills
  • Ease in Changing the Width/Thickness of Film
  • Tubular film is an added Advantage in Manufacturing of Pouches/Bags
  • Soft in Feel
  • Lower Sealing Temperature
  • Good dart impact and tear Strength
  • Good Process ability
  • High melt Strength
  • Good Gloss and Clarity
  • Lower melting Temperature, Hence Lower Processing Conditions
  • Lower Sealing Temperatures
  • Better Sealing Characteristics
  • Better Mechanical Properties

 

 

Typical Applications of PP TQ Blown Film Machine Manufacturer:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

 

OPTIONAL ATTACHMENTS of PP TQ Blown Film Machine Manufacturer:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

 

Features of PP TQ Blown Film Machine Manufacturer:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Machine Manufacturer:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Machine Manufacturer:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Machine Manufacturer

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Machine Manufacturer

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

PP TQ Blown Film Making Machine

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Making Machine

PP TQ Blown Film Making Machine India

PP TQ Blown Film Making Machine Manufacturer

PP TQ Blown Film Making Machine Plant

PP TQ Blown Film Making Machine Line

PP TQ Blown Film Making Machine Unit

PP TQ Blown Film Making Machine Export

PP TQ Blown Film Making Machine Manufacturer India

PP TQ Blown Film Making Machine in Ahmedabad

#PP#TQ#Blown#Film#Making#Machine#

 

 

PP TQ Blown Film Making Machine

This extensive range of PP TQ Blown Film Making Machine include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our Blown Film Plants and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Making Machine are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, mono and two layer lines are available with Rotating die.

This PP TQ Blown Film Making Machine incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Making Machine. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Making Machine can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Making Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP TQ Blown Film Making Machine. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Making Machine

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Making Machine:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Making Machine:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Typical Applications of PP TQ Blown Film Making Machine:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

OPTIONAL ATTACHMENTS of PP TQ Blown Film Making Machine:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

Features of PP TQ Blown Film Making Machine:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Making Machine:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Making Machine:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Making Machine

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Making Machine

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Making Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Blown Film Machine Manufacturer in India

February 27, 2018 • Mrunal Ramanuj

Blown Film Machine Manufacturer in India

Blown Film Machine Manufacturer in India Plant

Blown Film Machine Manufacturer in India Line

Blown Film Machine Manufacturer in India Unit

Blown Film Machine Manufacturer in India Export

Blown Film Making Machine

Blown Film Machine Manufacturer India

#Blown#Film#Machine#Manufacturer#in#India#

 

 

Blown Film Machine Manufacturer in India – MACHINE – LINE – PRESS

Blown Film Machine Manufacturer in India are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Blown Film Machine Manufacturer in India material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Machine Manufacturer in India is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blown Film Machine Manufacturer in India can also be produced with this machine.

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, Blown Film Machine Manufacturer in India, monofilament plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Blown Film Machine Manufacturer in India : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geo membrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Machine Manufacturer in India, blown film plant, blown film extruder, Blown Film Machine Manufacturer in India and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags Blown Film Machine Manufacturer in India multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Blown Film Machine Manufacturer in India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Machine Manufacturer in India carry bag making machine blown film plant Multilayer Blown Film.

Blown Film Machine Manufacturer in India such as Monolayer Blown Film Plant, Multilayer Blown Film Plant, Blown Film Machine Manufacturer in India, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

Blown Film Machine Manufacturer in India. The offered blown film plant is used for making the plastic film or sheet. This Blown Film Machine Manufacturer in India is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of Blown Film Machine Manufacturer in India:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Blown Film Machine Manufacturer in India:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 

Blown Film Machine Manufacturer in India. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Blown Film Machine Manufacturer in India:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Blown Film Machine Manufacturer in India:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Blown Film Machine Manufacturer in India:

  • Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Blown Film Making Machine

February 27, 2018 • Mrunal Ramanuj

Blown Film Making Machine

Blown Film Making Machine India

Blown Film Making Machine Manufacturer

Blown Film Making Machine Plant

Blown Film Making Machine Line

Blown Film Making Machine Unit

Blown Film Making Machine Export

Blown Film Making Machine India

Blown Film Making Machine Plant Line

Blown Film Making Machine in India

Blown Film Making Machine in Ahmedabad

#Blown#Film#Making#Machine#

Blown Film Making Machine – MACHINE – LINE – PRESS

Blown Film Making Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Blown Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Making Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blown Film Making Machine can also be produced with this machine.

 

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, Blown Film Making Machine, monofilament plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Blown Film Making Machine : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geo membrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Making Machine, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Blown Film Making Machine such as Monolayer Blown Film Plant, Multilayer Blown Film Plant, High Speed Blown Film Plant, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

Blown Film Making Machine. The offered blown film plant is used for making the plastic film or sheet. This Blown Film Making Machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of Blown Film Making Machine:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Blown Film Making Machine:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 


Features of Blown Film Making Machine:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Blown Film Making Machine:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Blown Film Making Machine:

  • Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

Blown Film Plant

February 27, 2018 • Mrunal Ramanuj

Blown Film Plant

Blown Film Plant India

Blown Film Plant Machine

Blown Film Plant Manufacturer

Blown Film Plant Line

Blown Film Plant Unit

Blown Film Plant Export

Blown Film Plant Making Machine

Blown Film Plant Making Machine India

Blown Film Plant Manufacturer India

 

 

#Blown#Film#Plant#

 

Blown Film Plant – MACHINE – LINE – PRESS

Blown Film Plant are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Blown Film Plant material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blown Film Plant can also be produced with this machine.

 

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, PP-TQ blown film plant, Blown Film Plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Blown Film Plant : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geo membrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film Plant Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant ABA Multi layer Blown Film Plant blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Blown Film Plant such as Blown Film Plant, Multilayer Blown Film Plant, High Speed Blown Film Plant, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

Blown Film Plant. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of Blown Film Plant:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Blown Film Plant:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 

Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Blown Film Plant:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Blown Film Plant:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Blown Film Plant

:

  • Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

LDPE Lamination Coating Machine

January 10, 2018 • Mrunal Ramanuj

LDPE Lamination Coating Machine

LDPE Lamination Coating Machine Plant

LDPE Lamination Coating Machine Exporter

LDPE Lamination Coating Machine Manufacturer

LDPE Lamination Coating Machine India

LDPE Lamination Coating Machine Line

Extrusion Coating Lamination Machine

Extrusion Coating Plant

Extrusion Lamination Plant

Plastic Extrusion Coating Lamination Machine

Plastic Processing Machine

Woven Sack Coating Lamination Machine

Extrusion Coating Lamination Line

Plastic Extrusion Lamination Line

Extrusion Coating Machine India

Extrusion Coating Machine Exporter

Plastic Lamination Coating Machine

Plastic Extrusion Processing Machine

Plastic Processing Machine

LDPE Coating Machine

LDPE Lamination Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Paper board is coated with plastics to combine the me-chemical properties of the paper board with the barrier and sealing properties of plastics. Paper board combined with a relatively small number of plastic materials will provide the extra features needed to make the paperboard suit-able for a number of specially demanding applications. Extrusion coating is a process whereby molten plastic is applied to paperboard and subsequently chilled to form an extremely thin, smooth layer of uniform thickness. The molten plastic can be used as an adhesive to laminate a plastic film or a metal foil.

Extrusion coating and lamination are used to achieve:

Moisture Protection, Barrier to Water Vapor, Oxygen, Aroma, etc., Grease Resistance, Heat Sal ability, Sales Appeal, for Example Shiny Surfaces.

The use of extrusion coated and laminated paperboard provides outstanding promotional benefits in terms of visual appeal and consumer handling.

High gloss is created by extrusion coating and a specific high gloss chill roll. A metallic effect is created by lamination with aluminum foil or metalized polyester film. These materials and processes also provide tactile sensations of high quality and luxury which the consumer associates with high value products packaged in these materials.

Examples of Extruded and Laminated Products Providing Sales Appeal

  • PE (polyethylene) extrusion coating of paperboard with a gloss or matt finish. Printing and gluing (with cold glue) can be done on a corona-treated surface.

PP (polypropylene) and PET (polyethylene terephthalate) are two heat resistant polymers that, applied on the board, can be used in oven applications.

Aluminum foil and metalized polyester film may be laminated to the paperboard to provide a metallic effect. Printing can be done on a pre-treated surface.

Functional Coating

Paperboard as such is suitable for the packaging of dry products in general. However, plain paperboard is only suitable for direct contact with moist and greasy foods to a limited extent, because moisture will affect the mechanic-cal properties of the paperboard, and absorbed grease will cause stains. Such effects will obviously reduce the protective function of the package and may detract from the appearance as well.

Extrusion coating or lamination adds a thin layer of plastic to the paperboard. Plastic coatings can provide resistance to grease and moisture and, where appropriate, be heat resistant. Plastic coatings can be heat sealed and in some constructions these seals can be leak proof. Depending on the application, the paperboard may be extrusion coated on one or two sides.

Aluminum lamination provides packages with a barrier to light, moisture, grease and gases. The aluminum foil is often plastic coated to provide product safety and heat sealing abilities.

Factory Add : 

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office : 

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

Adhesive Tape Roll Making Machine

January 6, 2018 • Mrunal Ramanuj

Adhesive Tape Roll Making Machine

Adhesive Tape Roll Making Machine Manufacturer

Adhesive Tape Roll Making Machine Plant

Adhesive Tape Roll Making Machine Exporter

Adhesive Tape Roll Making Machine India

Adhesive Tape Roll Making Machine in India

Adhesive Tape Roll Making Plant

Adhesive Tape Roll Making Line

Adhesive Tape Roll Making Unit

Adhesive Tape Roll Making Line Manufacturer

Self Adhesive Tape Roll Making Machine

BOPP Tape Coating Machine

BOPP Tape Lamination Machine

Adhesive Tape Making Machine

BOPP tape Coating Plant

Plastic Converting Machine

Cello Tape making Machine India

BOPP Tape making Line

Plastic Film Coating Lamination Machine

Plastic Roll to Roll Coating Machine

Plastic Extrusion Machine Exporter

Self Adhesive Tape Coating Plant 

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Adhesive coating lamination machine works in terms of electrical heat source. The gravure equipped with adhesive coating lamination plant supports for coating adhesives on labeling and packaging film materials. This is a suitable option to produce variety of packaging films with adhesives applied on it. The heating roller with nip roll keeps the application flawless. Adhesive coating lamination line suits best for fast production of packaging bags with lamination lines.

Extrusion-based coating/laminating and adhesive-based film laminating are different manufacturing techniques a converter can use to make a composite construction. The physical properties and performance characteristics of flexible packaging made by extrusion coating and laminating can be identical to that made by film laminating. Many of the major components of the final constructions are also the same. So which technique should be used for a particular product package? The decision is not an easy one, with equipment availability, run length, polymer specifications, and manufacturing efficiencies some of the major variables in this equation.

The performance properties of extruded and adhesive-laminated structures are frequently dependent upon the types of polymeric, adhesive and surface treatment/priming ingredients combined to deliver the intended package performance. Multiple performance criteria such as mechanical properties, gas and moisture barrier properties, sealability, printability and cost will be integrated to satisfy the multiple performance properties of both rigid and flexible packages. Many polymeric materials are thermodynamically incompatible due to differences in their chemical make-up. Combining these materials can create the potential for phase separation and structural degradation. The key is to create a heterogeneous layering within an extrusion or adhesive lamination process so performance properties will not degrade over time.

Adhesive laminates can be made by dry bonding, wet bonding, UV/EB curing and by hot melt adhesion processes. Extrusion laminates are constructed by extruding a thin tie-layer of a plastic material to bond together two dissimilar materials, such as a polymer film, paper or foil. Furthermore, coextruded materials are produced by extruding several polymer layers simultaneously and then pressing/cooling them together. Incompatible layers are laminated together using a thermoplastic adhesive as a tie layer. Eight layers or greater can be produced to optimize barrier, material thickness, weight and cost performance parameters.

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

BOPP Transparent Tape Making Machine

January 3, 2018 • Mrunal Ramanuj

BOPP Transparent Tape Making Machine

BOPP Transparent Tape Making Machine India

BOPP Transparent Tape Making Machine Plant

BOPP Transparent Tape Making Machine Exporter

BOPP Transparent Tape Making Machine Manufacturer

BOPP Transparent Tape Making Machine in India

Tape Making Machine

Cello Tape making Plant

BOPP tape Coating Machine

Adhesive Tape Lamination Machine

Roll to Roll Lamination Machine

BOPP Cello Tape Machine

Self Adhesive Tape making Machine India

Plastic Converting Machine

Plastic Extrusion Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

BOPP Transparent Tape Making Machine works in terms of electrical heat source. The gravure equipped with BOPP Transparent Tape Making Machinesupports for coating on labeling and packaging film materials. This is a suitable option to produce variety of packaging films with BOPP applied on it. The heating roller with nip roll keeps the application flawless. BOPP coating lamination line suits best for fast production of packaging bags with lamination lines.

BOPP Transparent Tape Making Machine
To meet diverse requirements of our clients in the best possible manner, we are manufacturing, exporting & supplying a comprehensive assortment of Coating Machines – BOPP Adhesive Coating Machine. Offered machines are manufactured by our skilled professionals using the best technology to render maximum clients’ satisfaction. In order to meet variegated demands of clients, this is made available in various customized options. Besides, clients can avail this product at market-leading prices.

Features:

  • Enhanced service life
  • User-friendly operation
  • Anti-corrosive body

Specifications:

Type Of Machine BOPP Transparent Tape Making Machine
Working Speed 100 To 120 Mtr / Min
Maximum Web Width 1000 Mm
Unwind Roll Dia. 800 Mm / 1000 Mm
Rewind Roll Dia 800 Mm / 1000 Mm
Drying Section Multi Zone Arch Type
Hear Source Electrical / Hot Air
Coating Section Gravure
Lamination Coating Section Heating Roller With Nip Roll
Unwind / Rewind Simplex / Duplex

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

Blown Film Extrusion Machine

December 27, 2017 • Mrunal Ramanuj

Blown Film Extrusion Machine

Blown Film Extrusion Machine India

Blown Film Extrusion Machine Plant

Blown Film Extrusion Machine Manufacturer

Blown Film Extrusion Machine Exporter

Blown Film Extrusion Machine Line Plant Unit

Blown Film Machine Exporter

Blown Film Machine India

Blown Film Machine Manufacturer

Blown Film Line

Blown Film India

Blown Film Machine

Blown Making Machine

Plastic Blown Film Machine

Plastic Extrusion Machine

Blown Film Extrusion Plant

Blown Making Machine

Plastic Carry Bag Making Machine

Plastic Blown Extruder Line

Plastic Processing Machine

Plastic Extrusions Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high – speed plants can give processors the competitive edge and quick return on their investment.

Two layer ABA Die blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Features :

  • Manual as well as pneumatic screen changer
  • Oscillating haul-off
  • Internal bubble cooling
  • Automatic bubble cage
  • Online thickness monitoring AND surface winders with taper tension Control.

Applications :

  • Film for Shopping Bags
  • Film for Liners
  • Stretch Film
  • Shrink Film
  • Lamination Film
  • Biodegradable Film

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

PP-TQ Blown Film Machine

December 19, 2017 • Mrunal Ramanuj

PP-TQ Blown Film Machine

PP-TQ Blown Film Machine India

PP-TQ Blown Film Machine Exporter

PP-TQ Blown Film Machine Manufacturer

PP-TQ Blown Film Machine Plant

PP Blown Film Machine

PP Blown Film Plant

PP Blown Film Extrusion Machine

PP TQ Blown Film Extrusion Plant

PP TQ Sheet Plant India

Polypropylene Sheet making Machine

Plastic Carry Bag Making Machine

Shopping Bag Making Machine

Plastic Processing Machinery Exporter

Plastic PP Bag Making Machine

PP TQ Blown Line

PP Extrusion Line

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP-TQ Blown Film Machine can be chosen with moderate to higher production capacity. PP-TQ Blown Film Machine is used in majority in textile and food industries in majority. PP-TQ Blown Film Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

Features OF PP-TQ Blown Film Machine:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Applications OF PP-TQ Blown Film Machine:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

 

Plastic Bag Making Machine

December 18, 2017 • Mrunal Ramanuj

Plastic Bag Making Machine

Plastic Bag Making Machine India

Plastic Bag Making Machine Manufacturer

Plastic Bag Making Machine Line

Plastic Bag Making Machine Exporter

Plastic Bag Making Machine in India

Plastic Bag Making Machine Exporter in India

Carry Bag Making Machine

Plastic Carry Bag Making Machine

Blown Film Machine India

Blown Film Plant

Blown Film Extrusion Machine India

Plastic Shopping Bag Making Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Plastic Bag Making Machine, Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high – speed plants can give processors the competitive edge and quick return on their investment.

Plastic Bag Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Plastic Bag Making Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, Plastic Bag Making Machine materials can also be produced from this single plant.

Applications of Plastic Bag Making Machine :

  • Film for Shopping Bags
  • Film for Liners
  • Stretch Film
  • Shrink Film
  • Lamination Film
  • Biodegradable Film

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147