Skip to Content

Tag: Machine In

Stretch Film Making Machine in Ahmedabad

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



  • Stretch Film Making Machine in Ahmedabad

  • Stretch Film Making Machine in Ahmedabad India
  • Stretch Film Making Machine in Ahmedabad Manufacturer
  • Stretch Film Making Machine in Ahmedabad Plant
  • Stretch Film Making Machine in Ahmedabad Line
  • Stretch Film Making Machine in Ahmedabad Manufacturer India
  • Stretch Film Making Machine in Ahmedabad Manufacturer Plant
  • Stretch Film Making Machine in Ahmedabad Manufacturer India
  • Stretch Film Making Machine in Ahmedabad Manufacturer Line

 

  • Stretch Film Making Machine in Ahmedabad
  • Stretch Film Making Machine in Ahmedabad is the process that allows the Stretch Film Making Machine in Ahmedabad to be stretched before (pre) being applied to a load.
  • Stretch Film Making Machine in Ahmedabad is a Stretch Film Making Machine in Ahmedabad that is made to be thinner and stronger than standard stretch film. This Stretch Film Making Machine in Ahmedabad has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Stretch Film Making Machine in Ahmedabad India brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Stretch Film Making Machine in Ahmedabad India is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Stretch Film Making Machine in Ahmedabad:
  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability


  • Standard Sizes Available of Stretch Film Making Machine in Ahmedabad:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Stretch Film Making Machine in Ahmedabad  technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Stretch Film Making Machine in Ahmedabad units and of course for winding of films.

  • applications:
  • 3, 5 and 7 layer films
  • films for pallet Stretch Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Stretch Film and high-power-Stretch Film
  • cling film

Extrusions Coating Lamination Machine in Ahmedabad

April 27, 2018 • Mrunal Ramanuj
  • Extrusions Coating Lamination Machine in Ahmedabad
  • Extrusions Coating Lamination Machine in Ahmedabad India
  • Extrusions Coating Lamination Machine in Ahmedabad Manufacturer
  • Extrusions Coating Lamination Machine in Ahmedabad Plant
  • Extrusions Coating Lamination Machine in Ahmedabad Line
  • Extrusions Coating Lamination Machine in Ahmedabad Unit
  • Extrusions Coating Lamination Machine in Ahmedabad Export
  • Extrusions Coating Lamination Making Machine in Ahmedabad
  • Extrusions Coating Lamination Making Machine in Ahmedabad India
  • #Extrusions #Coating #Lamination #Machine #in #Ahmedabad

 

 

Coating Lamination Machine

Intruduction of Extrusions Coating Lamination Machine in Ahmedabad:-

Extrusions Coating Lamination Machine in Ahmedabad (Lamination Plant) :

Extrusions Coating Lamination Machine in Ahmedabad and extrusion laminating are converting processes that allow different substrate materials to be combined to obtain a single compound structure. The materials involved may include plastics, paper, carton board, or aluminum foils.

For coating thin layer of polyolefins (Mainly LDPE/PP) on substrates like Paper, Cotton Cloth, Woven fabrics, Non Woven Fabric, Craft paper, Jute fabrics, Aluminium foil, BOPP film, Polyester film, etc. up to 3150 mm Web width applications.

Coating extensively used in a wide variety of food and non-food applications.
Tandem Lamination Plant For coating Circular Woven fabric, for producing multi layer laminates up to 5 layers along with the various substrates like Paper, Aluminum foil, Polyester film etc.

Extrusions Coating Lamination Machine in Ahmedabad is suitable for the double -layer and multiple layer lamination of such roll film materials as BOPP, PET, Nylon, CPP, CPE, aluminium foil and paper etc

coating PE/PP on substrates like Woven Fabric/Sacks, Tarpaulin, Cotton Cloth, Jute Fabric, Paper, Aluminum foil, BOPP Film, Polyester Film, CPP Film, Jumbo Bags, Non Woven Fabric, etc.

Our Featured Tandem Extrusions Coating Lamination Machine in Ahmedabad with fully Auto Back to Back Registration System and centralized Control System for Extrusions Coating Lamination Machine in Ahmedabad combinations up to 5 Layers for producing Multilayer Laminated Products with Combination of various substrates like Woven Fabrics, BOPP, Paper, Aluminum foil, Polyester Film, etc.

For coating thin layer of polyolefins (Mainly LDPE/PP) on substrates like Paper, Cotton Cloth, Woven fabrics, Non Woven Fabric, Craft paper, Jute fabrics, Aluminium foil, BOPP film, Polyester film, etc.

Extrusions Coating Lamination Machine in Ahmedabad

We are a leading Manufacturer & Exporter of Extrusion Coating Lamination Plant such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Extrusions Coating Lamination Machine in Ahmedabad

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

  • Application of Extrusions Coating Lamination Machine in Ahmedabad:-
  • Paper coating and laminating
  • Flexible packaging
  • Board coating and laminating
  • Fabric scbrim and non-woven

Extrusions Coating Lamination Machine in Ahmedabad

Extrusions Coating Lamination Machine in Ahmedabad  is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Extrusions Coating Lamination Machine in Ahmedabad:-

Extrusions Coating Lamination Machine in Ahmedabad and laminating lines are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Extrusion coater laminators deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.

Process description of Extrusions Coating Lamination Machine in Ahmedabad:-

In the Extrusions Coating Lamination Machine in Ahmedabad process an extruder forces melted thermoplastic resin through a horizontal slot-die onto a moving web of substrate. The resulting product is a permanently coated web structure. Extrusion lamination is a similar process to extrusion coating, where the resin is extruded between two substrates and acts as a bonding agent.

Inside an Extrusions Coating Lamination Machine in Ahmedabad and laminating line the substrates and melt are nipped at a bonding station. This consists of a large roll, a pressure roll, and a counter-pressure roll cooled by water. The combination of the pressure between the rolls and the temperature permits delivery of the correct adhesion level.

The final product is rewound as a permanently bonded multi-ply laminated structure. Most plastic films and foils require a primer coating before they are used in the extrusion process.

  • TAGS of Extrusions Coating Lamination Machine in Ahmedabad;-
  • lamination Plant,
  • Extrusion Coating Lamination Line,
  • Extrusion Coating Plant,
  • Woven Fabric Lamination Plant,
  • Woven Sack Bag Lamination Plant

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Air Bubble Sheet Making Machine in India

April 20, 2018 • Mrunal Ramanuj
  • Air Bubble Sheet Making Machine in India
  • Air Bubble Sheet Making Machine in India Manufacturer
  • Air Bubble Sheet Making Machine in India Plant
  • Air Bubble Sheet Making Machine in India Line
  • Air Bubble Sheet Making Machine in India Unit
  • Air Bubble Sheet Making Machine in India Export
  • Air Bubble Sheet Making Machine in India Ahmedabad
  • Air Bubble Sheet Making Plant in India
  • #Air #Bubble #Sheet #Making #Machine #in #India

Air Bubble Sheet Making Machine in India

Air Bubble Sheet Making Machine in India such as Air Bubble Sheet Line, Air Bubble Sheet Making Machine, Bubble Sheet Making Machine, Bubble Film Making Machine, Cushion Film Making Machine, Air Bubble Film Machine and many more items.

 

 

Introduction of Air Bubble Sheet Making Machine in India;-

Air Bubble Sheet Making Machine in India, a flexible and transparent plastic sheting containig numerous small air pockets. The sheets offer cushioning and scratch protection far superior to packing paper and are used to protect items during shipping and storage. Bubble wrap is lightweight, waterresistant, reusablenon-scratching and is used for packing fragile items. It can be used to cushion medium to heavy weight products.

Air Bubble Sheet Making Machine in India are considered effective wrapping material in electronic, electrical, glassware, machinery, automobilespare parts, and many more industries. Air bubble sheet line material is soft in texture and the bubble like protruding features protect the products from scratch and damages during various packaging and shipping processes. Air bubble sheet plant is an affordable investment for producing safe stuffing material for brittle as well as heavy products. Air bubble sheet machine can produce sheets of various dimensions and lengt

This Air bubble film making machine,air bubble film extrusion machine,Air Bubble Sheet Making Machine in India
Polyethylene air cushion film (also called polyethylene bubble film), which is divided into two kind: ordinary polyethylene aircushion film and composite polyethylene air cushion film, is a kind of packing material which has been widely used at present.

Air bubble film making machine,air bubble film extrusion machine,air bubble film machine manufacturers also called air bubble film, bubble wrap, LLDPE air bubble film and so on. it is made of PE , the diameter of our bubble is 6mm,10mm,12mmm,20mm,25mm. the max width can be up to 1800mm. besides , we can made the bubble into 2 layer bubble film , 3 layers bubble film , 5 layers bubble film and other multilayer bubble film .so far , we have developed many lamitated bubble film ,like , EPE foam bubble film , woven bubble film ,kraft bubble film

 

Air Bubble Sheet Making Machine in India.

The offered product is widely demanded and appreciated by our clients for its brilliant features. Our dexterous professionals manufacture this product, using the finest quality raw material that is totally rust free. In ahead of their final dispatch, this is quality checked by our quality controllers on various parameters set by the industry. Clients can avail the offered range from us at market leading prices.

Features of Air Bubble Sheet Making Machine in India:

  • Excellent functionality
  • Consistent performance
  • High strength

Applications of Air Bubble Sheet Making Machine in India:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instruments
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

Air Bubble Sheet Making Machine in India. This sheet line is developed using top class material and progressive technology in tandem to universally verified standards. Moreover, our offered sheet line is highly appreciated by our clients for its high productivity with less power consumption.

Features of Air Bubble Sheet Making Machine in India:

  • Durable finish standard
  • Robust design
  • Long lasting

Air Bubble Sheet Making Machine in India. Our offered machine is manufactured keeping in mind the industry norms by using advance techniques. Furthermore, this machine is known for its user-friendly nature & performance. Offered machine is available in numerous specifications to choose from.

Features of Air Bubble Sheet Making Machine in India:

  • Application specific design
  • Long working life
  • Easy maintenance

Air Bubble Sheet Making Machine in India. The offered machine is available in various specifications in accordance to the customer’s needs. This machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered machine is examined under the direction of professionals to ensure the flawlessness.

Features of Air Bubble Sheet Making Machine in India:

  • Smooth functioning
  • Low maintenance
  • Durability

Application of Air Bubble Sheet Making Machine in India:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instrumentsa
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Rotogravure Printing Machine in Ahmedabad

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine in Ahmedabad

Rotogravure Printing Machine in India

Rotogravure Printing Making Machine in Ahmedabad

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant in Ahmedabad

Rotogravure Printing Machine Line in Ahmedabad

Rotogravure Printing Machine Unit in Ahmedabad

Rotogravure Printing Machine Export in Ahmedabad

Rotogravure Printing Machine Making in India

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer

#Rotogravure#Printing#Machine#in#Ahmedabad#

 

 

Rotogravure Printing Machine in Ahmedabad

The Rotogravure Printing Machine in Ahmedabad is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine in Ahmedabad uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine in Ahmedabad

The layout of a Rotogravure Printing Machine in Ahmedabad follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine in Ahmedabad:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine in Ahmedabad:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

Rotogravure Printing Machine in Ahmedabad

Process advantages and applications of Rotogravure Printing Machine in Ahmedabad:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine in Ahmedabad

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Machine in India

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine in India

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant in India

Rotogravure Printing Machine

Rotogravure Printing Machine Line in India

Rotogravure Printing Unit Machine in India

Rotogravure Printing Machine Export in India

Rotogravure Printing Making Machine in India

Rotogravure Printing Making Machine in Ahmedabad

#Rotogravure#Printing#Machine#in#India#

 

 

Rotogravure Printing Machine in India

The Rotogravure Printing Machine in India is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine in India uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine in India

The layout of a Rotogravure Printing Machine in India follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine in India:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine in India:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed Rotogravure Printing Machine in India, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

 

Process advantages and applications of Rotogravure Printing Machine in India:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes Rotogravure Printing Machine in India an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine in India

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Plastic Reprocess Machine in India

March 1, 2018 • Mrunal Ramanuj

Plastic Reprocess Machine in India

Plastic Reprocess Machine in India Manufacturer

Plastic Reprocess Machine in India Line

Plastic Reprocess Machine in India Unit

‘Plastic Reprocess Machine in India Plant

Plastic Reprocess Machine in India Unit

Plastic Reprocess Machine in India Export

Plastic Reprocess Making Machine in India

Plastic Reprocess Manufacturer Machine in India

Plastic Reprocess Machine in Ahmedabad

Plastic Reprocess Making Machine in Ahmedabad

Plastic Reprocess Manufacturer Machine in Ahmedabad

#Plastic#Reprocess#Machine#in#India#

Plastic Reprocess Machine in India

 

Plastic Reprocess Machine in India such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Reprocess Machine in India is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Reprocess Machine in India includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastic Reprocess Machine in India have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Reprocess Machine in India:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Reprocess Machine in India:

PET

Main article: Plastic Reprocess Machine in India

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The Plastic Reprocess Machine in India thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Reprocess Machine in India

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Reprocess Machine in India:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Reprocess Machine in India

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Reprocess Machine in India and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and Plastic Reprocess Machine in India is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Reprocess Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Plastic Recycling Machine in India

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Machine in India

Plastic Recycling Machine in India Manufacturer

Plastic Recycling Machine in India Plant

Plastic Recycling Machine in India Line

Plastic Recycling Machine in India Unit

Plastic Recycling Machine in India Export

Plastic Recycling Making Machine in India 

Plastic Recycling Making Machine India 

Plastic Recycling Making Machine in Ahmedabad

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine manufacturer India

Plastic Recycling Machine Manufacturer in Ahmedabad 

#Plastic#Recycling#Machine#in#India#

 

 

Plastic Recycling Machine in India

 

Plastic Recycling Machine in India such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Machine in India is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Machine in India includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Machine in India:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Machine in India:

PET

Main article: Plastic Recycling Machine in India

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Machine in India

This Plastic Recycling Machine in India is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE Plastic Recycling Machine in India are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

PP TQ Blown Film Machine in India

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Machine in India

PP TQ Blown Film Machine in India Manufacturer

PP TQ Blown Film Machine in India Plant

PP TQ Blown Film Machine in India Line

PP TQ Blown Film Machine in India Unit

PP TQ Blown Film Machine in India Export

PP TQ Blown Film Making Machine

PP TQ Blown Film making Machine in India

PP TQ Blown Film Machine Manufacturer in India 

#PP#TQ#Blown#Film#Machine#in#India#

 

 

 

 

PP TQ (Polyproplene) BLOWN  FILM PLANT

This extensive range of PP TQ Blown Film Machine in India include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our PP TQ Blown Film Machine in India and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded blown film lines are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion PP TQ Blown Film Machine in India is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, mono and two layer lines are available with Rotating die.

This PP TQ Blown Film Machine in India incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Machine in India. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP TQ Blown Film Machine in India is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Machine in India can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP-TQ blown film machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP Blown Film Plant. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

 

Today  for growth of PP TQ Blown Film Machine in India:

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Machine in India:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Machine in India:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Advantages of PP TQ Blown Film Machine in India:

  • Low Capital
  • Low Space Requirement
  • Lower Operating Cost
  • Less Demanding Operating Skills
  • Ease in Changing the Width/Thickness of Film
  • Tubular film is an added Advantage in Manufacturing of Pouches/Bags
  • Soft in Feel
  • Lower Sealing Temperature
  • Good dart impact and tear Strength
  • Good Process ability
  • High melt Strength
  • Good Gloss and Clarity
  • Lower melting Temperature, Hence Lower Processing Conditions
  • Lower Sealing Temperatures
  • Better Sealing Characteristics
  • Better Mechanical Properties

 

Typical Applications of PP TQ Blown Film Machine in India:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

OPTIONAL ATTACHMENTS of PP TQ Blown Film Machine in India:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

 

Features of PP TQ Blown Film Machine in India:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Machine in India:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Machine in India:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

 

PP TQ Blown Film Machine in India

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP Tubing Film Plant

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Machine in India is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

© 2018 oceanextrusions.com All rights reserved.