Skip to Content

Tag: Funny

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Rotogravure Printing Machine Manufacturer

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine Manufacturer

Rotogravure Printing Machine

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant Manufacturer

Rotogravure Printing Machine Line Manufacturer

Rotogravure Printing Machine Unit Manufacturer

Rotogravure Printing Machine Export Manufacturer

Rotogravure Printing Making Machine

Rotogravure Printing Making Machine in India

Rotogravure Printing making Machine in Ahmedabad

#Rotogravure#Printing#Machine#Manufacturer#

 

 

Rotogravure Printing Machine Manufacturer

The Rotogravure Printing Machine Manufacturer is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine Manufacturer uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine Manufacturer

The layout of a Rotogravure Printing Machine Manufacturer follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine Manufacturer:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine Manufacturer:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

Rotogravure Printing Machine Manufacturer

Process advantages and applications of Rotogravure Printing Machine Manufacturer:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine Manufacturer

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Machine in Ahmedabad

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine in Ahmedabad

Rotogravure Printing Machine in India

Rotogravure Printing Making Machine in Ahmedabad

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant in Ahmedabad

Rotogravure Printing Machine Line in Ahmedabad

Rotogravure Printing Machine Unit in Ahmedabad

Rotogravure Printing Machine Export in Ahmedabad

Rotogravure Printing Machine Making in India

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer

#Rotogravure#Printing#Machine#in#Ahmedabad#

 

 

Rotogravure Printing Machine in Ahmedabad

The Rotogravure Printing Machine in Ahmedabad is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine in Ahmedabad uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine in Ahmedabad

The layout of a Rotogravure Printing Machine in Ahmedabad follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine in Ahmedabad:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine in Ahmedabad:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

Rotogravure Printing Machine in Ahmedabad

Process advantages and applications of Rotogravure Printing Machine in Ahmedabad:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine in Ahmedabad

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Machine in India

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine in India

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant in India

Rotogravure Printing Machine

Rotogravure Printing Machine Line in India

Rotogravure Printing Unit Machine in India

Rotogravure Printing Machine Export in India

Rotogravure Printing Making Machine in India

Rotogravure Printing Making Machine in Ahmedabad

#Rotogravure#Printing#Machine#in#India#

 

 

Rotogravure Printing Machine in India

The Rotogravure Printing Machine in India is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine in India uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine in India

The layout of a Rotogravure Printing Machine in India follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine in India:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine in India:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed Rotogravure Printing Machine in India, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

 

Process advantages and applications of Rotogravure Printing Machine in India:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes Rotogravure Printing Machine in India an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine in India

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Machine

March 3, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine

Rotogravure Printing Machine India

Rotogravure Printing Machine Manufacturer

Rotogravure Printing Machine in India

Rotogravure Printing Machine in Ahmedabad

Rotogravure Printing Machine Line

Rotogravure Printing Machine Plant

Rotogravure Printing Machine Unit

Rotogravure Printing Machine Export

Rotogravure Printing Making Machine

Rotogravure Printing Making Machine in India

Rotogravure Printing Making Machine in Ahmedabad

#Rotogravure#Printing#Machine#

 

Rotogravure Printing Machine

The Rotogravure Printing Machine is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine

The layout of a Rotogravure Printing Machine follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

 

Process advantages and applications of Rotogravure Printing Machine:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Advantages of Rotogravure Printing Machine;-

The Rotogravure Printing Machine process is the most popular printing process used in flexible-packaging manufacturing, because of its ability to print on thin film such as polyester, OPP, nylon, and PE, which come in a wide range of thicknesses, commonly 10 to 30 micrometers.

Other appreciated features include of Rotogravure Printing Machine:

  • printing cylinders that can last through large-volume runs without the image degrading
  • good quality image reproduction
  • low per-unit costs running high volume production
  • hi-speed performance
  • low ink consumption

Disadvantages of Rotogravure Printing Machine:

Shortcomings of the gravure printing process include:

  • high start-up costs: hundreds of thousands of copies needed to make it profitable
  • rasterized lines and texts
  • long lead time for cylinder preparation, which is offsite as the techniques used are so specialized

 

Plastic Recycling Making Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Making Machine

Plastic Recycling Making Machine India

Plastic Recycling Making Machine Manufacturer

Plastic Recycling Making Machine Manufacturer India

Plastic Recycling Making Machine Plant

Plastic Recycling Making Machine Line

Plastic Recycling Making Machine Unit

Plastic Recycling Making Machine Export

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Manufacturer in Ahmedabad

#Plastic#Recycling#Making#Machine#

 

 

Plastic Recycling Making Machine

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Making Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Making Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Making Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Making Machine:

PET

Main article: Plastic Recycling Making Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

 

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Recycling Making Machine:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Making Machine

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Recycling Making Machine and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

PP TQ Blown Film Machine Manufacturer

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Machine Manufacturer

PP TQ Blown Film Machine Manufacturer India

PP TQ Blown Film Machine Manufacturer Plant

PP TQ Blown Film Machine Manufacturer Line

PP TQ Blown Film Machine Manufacturer Unit

PP TQ Blown Film Machine Manufacturer Export

PP TQ Blown Film Machine Manufacturer in Ahmedabad

PP TQ Blown Film Machine Manufacturer in India

#PP#TQ#Blown#Film#Machine#Manufacturer#

 

 

 

PP TQ Blown Film Machine Manufacturer

This extensive range of PP TQ Blown Film Machine Manufacturer include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our PP TQ Blown Film Machine Manufacturer and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Machine Manufacturer are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, PP TQ Blown Film Machine Manufacturer are available with Rotating die.

This PP TQ Blown Film Machine Manufacturer incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Machine Manufacturer. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Machine Manufacturer can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP Blown Film Plant. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Machine Manufacturer:

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Machine Manufacturer:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Machine Manufacturer:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Advantages of PP TQ Blown Film Machine Manufacturer:

  • Low Capital
  • Low Space Requirement
  • Lower Operating Cost
  • Less Demanding Operating Skills
  • Ease in Changing the Width/Thickness of Film
  • Tubular film is an added Advantage in Manufacturing of Pouches/Bags
  • Soft in Feel
  • Lower Sealing Temperature
  • Good dart impact and tear Strength
  • Good Process ability
  • High melt Strength
  • Good Gloss and Clarity
  • Lower melting Temperature, Hence Lower Processing Conditions
  • Lower Sealing Temperatures
  • Better Sealing Characteristics
  • Better Mechanical Properties

 

 

Typical Applications of PP TQ Blown Film Machine Manufacturer:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

 

OPTIONAL ATTACHMENTS of PP TQ Blown Film Machine Manufacturer:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

 

Features of PP TQ Blown Film Machine Manufacturer:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Machine Manufacturer:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Machine Manufacturer:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Machine Manufacturer

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Machine Manufacturer

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

PP TQ Blown Film Making Machine

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Making Machine

PP TQ Blown Film Making Machine India

PP TQ Blown Film Making Machine Manufacturer

PP TQ Blown Film Making Machine Plant

PP TQ Blown Film Making Machine Line

PP TQ Blown Film Making Machine Unit

PP TQ Blown Film Making Machine Export

PP TQ Blown Film Making Machine Manufacturer India

PP TQ Blown Film Making Machine in Ahmedabad

#PP#TQ#Blown#Film#Making#Machine#

 

 

PP TQ Blown Film Making Machine

This extensive range of PP TQ Blown Film Making Machine include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our Blown Film Plants and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Making Machine are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, mono and two layer lines are available with Rotating die.

This PP TQ Blown Film Making Machine incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Making Machine. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Making Machine can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Making Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP TQ Blown Film Making Machine. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Making Machine

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Making Machine:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Making Machine:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Typical Applications of PP TQ Blown Film Making Machine:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

OPTIONAL ATTACHMENTS of PP TQ Blown Film Making Machine:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

Features of PP TQ Blown Film Making Machine:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Making Machine:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Making Machine:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Making Machine

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Making Machine

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Making Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com