Skip to Content

Tag: film

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Cast Film Making Machine Manufacturer

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 


  • Cast Film Making Machine Manufacturer

  • Cast Film Making Machine Manufacturer India
  • Cast Film Making Machine Manufacturer in Ahmedabad
  • Cast Film Making Machine Manufacturer Plant
  • Cast Film Making Machine Manufacturer Line
  • Cast Film Making Machine Manufacturer Unit
  • Cast Film Making Machine Manufacturer Export
  • Cast Film Making Machine Manufacturer Plant India
  • Cast Film Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

Ocean Extrusions Pvt. Ltd.,



  • Cast Film Making Machine Manufacturer
  • Cast Film Making Machine Manufacturer is the process that allows the Cast Film Making Machine Manufacturer to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine Manufacturer is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine Manufacturer brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine Manufacturer is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Cast Film Making Machine Manufacturer:

  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability

  • Standard Sizes Available of Cast Film Making Machine Manufacturer:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Cast Film Making Machine India technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Cast Film Making Machine India units and of course for winding of films.


  • applications:
  • 3, 5 and 7 layer films
  • films for pallet Cast Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-Cast Film
  • cling film

Stretch Film Making Machine in Ahmedabad

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,



  • Stretch Film Making Machine in Ahmedabad

  • Stretch Film Making Machine in Ahmedabad India
  • Stretch Film Making Machine in Ahmedabad Manufacturer
  • Stretch Film Making Machine in Ahmedabad Plant
  • Stretch Film Making Machine in Ahmedabad Line
  • Stretch Film Making Machine in Ahmedabad Manufacturer India
  • Stretch Film Making Machine in Ahmedabad Manufacturer Plant
  • Stretch Film Making Machine in Ahmedabad Manufacturer India
  • Stretch Film Making Machine in Ahmedabad Manufacturer Line

 

  • Stretch Film Making Machine in Ahmedabad
  • Stretch Film Making Machine in Ahmedabad is the process that allows the Stretch Film Making Machine in Ahmedabad to be stretched before (pre) being applied to a load.
  • Stretch Film Making Machine in Ahmedabad is a Stretch Film Making Machine in Ahmedabad that is made to be thinner and stronger than standard stretch film. This Stretch Film Making Machine in Ahmedabad has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Stretch Film Making Machine in Ahmedabad India brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Stretch Film Making Machine in Ahmedabad India is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Stretch Film Making Machine in Ahmedabad:
  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability


  • Standard Sizes Available of Stretch Film Making Machine in Ahmedabad:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Stretch Film Making Machine in Ahmedabad  technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Stretch Film Making Machine in Ahmedabad units and of course for winding of films.

  • applications:
  • 3, 5 and 7 layer films
  • films for pallet Stretch Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Stretch Film and high-power-Stretch Film
  • cling film

Stretch Film Making Machine India

June 9, 2018 • Mrunal Ramanuj

 


Manufacturer By Ocean Extrusions Pvt. Ltd.,


  • Stretch Film Making Machine India

  • Stretch Film Making Machine India in Ahmedabad
  • Stretch Film Making Machine India Manufacturer
  • Stretch Film Making Machine India Plant
  • Stretch Film Making Machine India Line
  • Stretch Film Making Machine India Unit
  • Stretch Film Making Machine India Export
  • Stretch Film Making Machine India Manufacturer India
  • Stretch Film Making Machine India Manufacturer in Ahmedabad


  • Cast Film Making Machine India

  • Cast Film Making Machine India is the process that allows the Cast Film Making Machine India to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine India is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine India brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine India is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.


  • The results are clear of Cast Film Making Machine India:
  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability

  • Standard Sizes Available of Cast Film Making Machine India:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Cast Film Making Machine India technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Cast Film Making Machine India units and of course for winding of films.


  • applications:
  • 3, 5 and 7 layer films
  • films for pallet Cast Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-Cast Film
  • cling film

Stretch Film Making Machine

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,


  • Stretch Film Making Machine

  • Stretch Film Making Machine India
  • Stretch Film Making Machine in Ahmedabad
  • Stretch Film Making Machine Plant
  • Stretch Film Making Machine Line
  • Stretch Film Making Machine Manufacturer
  • Stretch Film Making Machine Manufacturer India
  • Stretch Film Making Machine Plant India
  • Stretch Film Making Machine Unit
  • Stretch Film Making Machine Export
  • Stretch Film Making Machine Manufacturer Ocean Extrusions Pvt. Ltd.,


  • Stretch Film Making Machine

  • Stretch Film Making Machine is the process that allows the Stretch Film Making Machine to be stretched before (pre) being applied to a load.
  • Stretch Film Making Machine is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Stretch Film Making Machine brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Stretch Film Making Machine is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Stretch Film Making Machine:
  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability

  • Standard Sizes Available of Stretch Film Making Machine:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Stretch Film Making Machine technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Cast Film Making Machine India units and of course for winding of films.


  • applications:

  • 3, 5 and 7 layer films
  • films for pallet Stretch Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Stretch Film and high-power-Stretch Film
  • cling film

Cast Film Making Machine India

June 9, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,


  • Cast Film Making Machine India
  • Cast Film Making Machine India in Ahmedabad
  • Cast Film Making Machine India Manufacturer
  • Cast Film Making Machine India Plant
  • Cast Film Making Machine India Line
  • Cast Film Making Machine India Unit
  • Cast Film Making Machine India Export
  • Cast Film Making Machine India Manufacturer India
  • Cast Film Making Machine India Manufacturer in Ahmedabad
  • Cast Film Making Machine India Manufacturer By Ocean Extrusions Pvt. Ltd.,
  • Cast Film Making Machine India Plant Manufacturer


  • Cast Film Making Machine India
  • Cast Film Making Machine India is the process that allows the Cast Film Making Machine India to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine India is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine India brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine India is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.

  • The results are clear of Cast Film Making Machine India:
  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability


  • Standard Sizes Available of Cast Film Making Machine India:
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to Cast Film Making Machine India technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, monoaxial Cast Film Making Machine India units and of course for winding of films.

 



  • applications:

  • 3, 5 and 7 layer films
  • films for pallet Cast Film wrap (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-Cast Film
  • cling film

Cast Film Making Machine

June 9, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Cast Film Making Machine
  • Cast Film Making Machine India
  • Cast Film Making Machine in Ahmedabad
  • Cast Film Making Machine Manufacturer
  • Cast Film Making Machine Plant
  • Cast Film Making Machine Line
  • Cast Film Making Machine Manufacturer India
  • Cast Film Making Machine Manufacturer in Ahmedabad
  • Cast Film Making Machine Unit
  • Cast Film Making Machine Export


  • Cast Film Making Machine

  • Cast Film Making Machine is the process that allows the stretch film to be stretched before (pre) being applied to a load.
  • Cast Film Making Machine is a multi-layer stretch film that is made to be thinner and stronger than standard stretch film. This multi-layered stretch film has special characteristics that increase stretch resistance and strengthen load holding for transport. Ultimately, this produces less environmental waste since the operator consumes less material during usage.
  • The high-performance Cast Film Making Machine brings the benefits of the modern top of the range stretch wrapper to less advanced machines.
  • Cast Film Making Machine is strong, consistent and stable at a minimum effort of the worker. The cost of consumables is drastically reduced while increasing film coverage.

  • Cost and Time Effective
  • 50% less film consumption.
  • Longer length with the same reel weight due to its low thickness.
  • Less time and effort to wrap a load.
  • Presents minimum neck down while being applied.


  • The results are clear:

  • Less film consumption and thus lower packaging and waste disposal costs
  • More meters per roll for reduced storage space and fewer roll changes during processing
  • High retention forces for best pallet stability

  • Standard Sizes Available :
  • Hand Use : 430 – 450 MM x 9 Micron x 500 Meter. 2” Paper Core ID.
  • Machine Use : 430 – 450 MM x 9 Micron x 1500 Meter. 3” Paper Core ID.
  • Other Sizes that can be made on request : 150MM, 200MM, 250MM, 300MM, 400MM, 500MM, 550MM.

  • OEPL technologists who are working closely with film producers around the world to the cast film technology (cast film lines)., we are always testing new raw materials and improving our machines to meet the ever changing requirements in the market. Apart from extrusion, OEPL is also known to have innovative solutions for various designs of chillroll-units, Cast Film Making Machine units and of course for winding of films.

  • applications:

  • 3, 5 and 7 layer films
  • films for pallet Cast Film (transparent coloured)
  • hand wrap
  • machine wrap
  • power-Cast Film and high-power-stretch
  • cling film

Multilayer Blown Film Plant

June 7, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Multilayer Blown Film Plant
  • Multilayer Blown Film Plant India
  • Multilayer Blown Film Plant in Ahmedabad
  • Multilayer Blown Film Plant Manufacturer
  • Multilayer Blown Film Plant Line
  • Multilayer Blown Film Plant Machine
  • Multilayer Blown Film Plant Unit
  • Multilayer Blown Film Plant Export
  • Multilayer Blown Film Plant Manufacturer India
  • Multilayer Blown Film Plant Manufacturer in Ahmedabad
  • Multilayer Blown Film Plant Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Multilayer Blown Film Making Machine Plant
  • Multilayer Blown Film Making Machine Plant  in Ahmedabad
  • Multilayer Blown Film Making Machine Manufacturer

Multilayer
OEPL has been catering to the rapidly growing needs of the flexible packaging industry. With the objective of meeting the new challenges faced by the OEPL for improved film properties and cost optimizations, OEPL has been in the forefront of introducing Multilayer Blown Film Plant with latest technology like Internal Bubble Cooling (), Oscillating Haul-off and Advanced Winding Solutions.
OEPL’s power efficient, high speed Multilayer Blown Film Plant gives the advantages of lower conversion costs, high outputs and excellent film quality, providing processors the competitive edge and quick return on their investment.
Multilayer Blown Film Plant are equipped with advanced CAD Design dies to ensure uniform flow distribution, excellent melt characteristics and film quality.
A crucial Internal Bubble Cooling () mechanism facilitates higher output, optimum thickness randomisation of minimum conversion cost.
A special Air Cooling Ring enhances optical and mechanical properties of film and output.
A state of the art Oscillating Haul-off Unit provides Excellent Gauge Randomization, Improved Roll Geometry and Film Quality. The film winders provide superb quality rolls for tension sensitive films.
The Film line assembly is backed up by Computer Integrated Control Systems to achieve stage by stage production management and product quality control.

Multilayer Blown Film Plant are used for varied crucial applications in flexible packaging, which demand vital film properties like dart impact, strength, puncture resistance, hot tack strength, gloss, etc.


  • Feature of Multilayer Blown Film Plant:-

  • Unique design to suit various materials
  • Output range starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Grooved Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Uniquely designed spiral type of Co-Ex- ABC die suitable for LDPE-LLDPE materials
  • Uniquely designed dual lip air cooling ring for higher output
  • High velocity air ring blower with AC invertor drive
  • Bubble Calibrating BasOEPL
  • Vertical type / Horizontal type oscillating haul-off unit for gauge randomization
  • Web aligner system
  • Two station semi-automatic surface type rewinder
  • Centre & Side slitting arrangement
  • High density ceramic type band heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

  • Optional of Multilayer Blown Film Plant:-

  • Bimetallic Screw & Barrel
  • Fully Automatic Winder With PLC Controls
  • Trimming Arrangement With Suction Blower
  • Corona Treater Unit
  • Air Chiller Unit
  • Gravimetric Dossing Unit
  • IPC Based Line Control With PLC

  • Application of Multilayer Blown Film Plant:-

Blown Film Plant India

June 7, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Plant India
  • Blown Film Plant India in Ahmedabad
  • Blown Film Plant India Machine
  • Blown Film Plant India Manufacturer
  • Blown Film Plant India Line
  • Blown Film Plant India Unit
  • Blown Film Plant India Export
  • Blown Film Plant India Manufacturer India
  • Blown Film Plant India Manufacturer in Ahmedabad
  • Blown Film Making Plant India in Ahmedabad
  • Blown Film Making Plant India Manufacturer
  • Blown Film Making Plant Machine

Ocean Extrusions Pvt. Ltd. offers widest range of customized Blown Film Plant India, to suit a broad spectrum of resins, applications and output levels. Customers opting for can therefore be sure to produce best film quality with economical use of resources, short start-up and low change-over times as well as reduced waste and high productivity.


Blown Film Plant India – series of Blown Film Plant India are available with outputs ranging from 30 kg/hr to 1000 kg/hr and lay-flat widths ranging from 50 mm to 5000 mm for processing polymers as diverse as LD, LLD, HM – HDPE, PP. FOILEX – Blown Film Plant India are also available in special configurations to process HDPE rich films both through high stalk bubble and low frost line height bubbles. Blown Film Plant India incorporates advanced features like-grooved feed section, barrier screw, gravimetric blending/dosing system, Liquid PIB dosing system, manual as well as pneumatic screen changer, oscillating haul-off, internal bubble cooling, automatic bubble cage, online thickness monitoring and control and surface winders with taper tension control.


Applications include PE general purpose films, HDPE pick-up bags, shade-net film, PE lamination films, HD twist wrap films, stretch and cling films, shrink films, anti-rust films and paper like films.


Salient Features of Blown Film Plant India:-

  • Suitable Material :-HM-HDPE , LDPE, LLDPE
  • Feed Section:- Grooved Feed
  • Screw Type :- Barrier
  • EN41B material Gas Nitrided Screw and Barrel
  • Helical Gear Box
  • AC Drives for Extruder and Take-Up
  • Lowest Energy Consumption
  • High Output
  • Space Saver

Application

Blown Film Plant India :-

Blown Film Machine India

June 7, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine India
  • Blown Film Machine India in Ahmedabad
  • Blown Film Machine India Plant
  • Blown Film Machine India Line
  • Blown Film Machine India Manufacturer
  • Blown Film Machine India Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Machine India Ocean Extrusions Pvt. Ltd.,
  • Blown Film Making Machine India
  • Blown Film Making Machine India in Ahmedabad
  • Blown Film Making Machine Plant India

Blown Film Machine India Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Machine India:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m


  • Blown Film Machine India:-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

  • Materials

  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Blown Film Machine India Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Blown Film Machine India Of Special Adhesive Resins Are Used In Between.

    Application of Blown Film Machine India:-

Blown Film Line

June 6, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Line
  • Blown Film Line India
  • Blown Film Line in Ahmedabad
  • Blown Film Line Manufacturer
  • Blown Film Line Plant
  • Blown Film Line Unit
  • Blown Film Line Export
  • Blown Film Line Machine Manufacturer
  • Blown Film Line Machine India
  • Blown Film Line Machine in Ahmedabad
  • Blown Film Making Line
  • Blown Film Line Machine Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Line manufacturer Ocean Extrusions Pvt. Ltd.,
  • Ocean Extrusions Pvt. Ltd.,

Blown Film Line Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Line:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

 

  • Feature of Blown Film Line :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

https://www.youtube.com/watch?v=5di_u-s3Hyc

  • Materials of Blown Film Line :-
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Blown Film Line Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Plant

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Blown Film Plant
  • Blown Film Plant India
  • Blown Film Plant in Ahmedabad
  • Blown Film Plant Manufacturer
  • Blown Film Plant Line
  • Blown Film Plant Unit
  • Blown Film Plant Export
  • Blown Film Plant Machine
  • Blown Film Plant Manufacturer
  • Blown Film Plant on Google
  • Blown Film Plant on Youtube
  • Blown Film Plant on twitter
  • Blown Film Plant on Facebook
  • Blown Film Plant Machine in Ahmedabad
  • Blown Film Plant Machine in India

Blown Film Plant Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

Multi Layer Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil.... blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil….
Blown Film Plant pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

  • Blown Film Plant:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Plant :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Plant Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine on Google
  • Blown Film Machine on Youtube
  • Blown Film Machine on twitter
  • Blown Film Machine Plant India
  • Blown Film Machine Plant in Ahmedabad
  • Blown Film Making Machine
  • Blown Film Making Machine India
  • Blown Film Making Machine in Ahmedabad

Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Machine:-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Machine Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine Manufacturer India

June 6, 2018 • Mrunal Ramanuj

Manufacturer by Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine Manufacturer India
  • Blown Film Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Plant
  • Blown Film Machine Manufacturer India Line
  • Blown Film Machine Manufacturer India Manufacturer
  • Blown Film Making Machine Manufacturer India
  • Blown Film Making Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Unit
  • Blown Film Machine Manufacturer India Export
  • Blown Film Machine Manufacturer India Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Machine Manufacturer India Ocean Extrusions Pvt. Ltd.,

Double-Layer Co-Extrusion Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Two Layer Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Two Layer Blown Film Machine :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

  • Materials
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Mono Layer Blown Film Plant in Ahmedabad

April 28, 2018 • Mrunal Ramanuj

  • Mono Layer Blown Film Plant in Ahmedabad
  • Mono Layer Blown Film Plant in Ahmedabad in India
  • Mono Layer Blown Film Plant in Ahmedabad Machine
  • Mono Layer Blown Film Plant in Ahmedabad Manufacturer
  • Mono Layer Blown Film Plant in Ahmedabad Export
  • Mono Layer Blown Film Plant in Ahmedabad Line
  • Mono Layer Blown Film Plant in Ahmedabad Unit
  • Mono Layer Blown Film Making Plant in Ahmedabad
  • Mono Layer Blown Film Plant in Ahmedabad Manufacturer Ocean Extrusions Pvt. Ltd.
  • #Mono #Layer #Blown #Film #Plant #in #Ahmedabad

MONO LAYER BLOWN FILM PLANT – MACHINE – PLANT – LINE

Mono Layer Blown Film Plant in Ahmedabad gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend

  • Blown Film Machinery
  • Monolayer blown film machine
  • Multilayer blown film machine
  • A-B-A blown film machine
  • Co extrusion blown film machine
  • 3 layer blown film machinery

The manufacture of Mono Layer Blown Film Plant in Ahmedabad for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of “legs”; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Mono Layer Blown Film Plant in Ahmedabad & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line

Mono Layer Blown Film Plant in Ahmedabad, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine Mono Layer Blown Film Plant in Ahmedabad, Plastic processing machinery, Multilayer.

Mono Layer Blown Film Plant in Ahmedabad, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Mono Layer Blown Film Plant

April 28, 2018 • Mrunal Ramanuj

 

 

 

  • Mono Layer Blown Film Plant
  • Mono Layer Blown Film Plant Machine
  • Mono Layer Blown Film Plant in India
  • Mono Layer Blown Film Plant Manufacturer
  • Mono Layer Blown Film Plant Line
  • Mono Layer Blown Film Plant Unit
  •  Mono Layer Blown Film Plant Export
  • Mono Layer Blown Film Plant on Google
  • Mono Layer Blown Film Plant on Youtube
  • Mono Layer Blown Film Plant Blog
  • Mono Layer Blown Film Plant on Facebook
  • Mono Layer Blown Film Plant in Ahmedabad
  • Mono Layer Blown Film Making Plant India
  • Mono Layer Blown Film Making Plant
  • #Mono #Layer #Blown #Film #Plant
plastic processing machine, plastic woven bag line, woven sacks, paper, aluminium foil coating india

plastic processing machine, blown film line, pp box strapping line, plastic woven bag line, woven sacks, paper, aluminium foil coating india

MONO LAYER BLOWN FILM PLANT – MACHINE – PLANT – LINE

Mono Layer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and Mono Layer Blown Film Plant as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

  • Blown Film Machinery
  • Monolayer blown film machine
  • Multilayer blown film machine
  • A-B-A blown film machine
  • Co extrusion blown film machine
  • 3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of “legs”; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Mono Layer Blown Film Plant & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & Mono Layer Blown Film Plant Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.
Mono Layer Blown Film Plant
Mono Layer Blown Film Plant, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, Mono Layer Blown Film Plant, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Mono Layer Blown Film Machine

April 28, 2018 • Mrunal Ramanuj

  • Mono Layer Blown Film Machine
  • Mono Layer Blown Film Machine Plant
  • Mono Layer Blown Film Machine Line
  • Mono Layer Blown Film Machine Unit
  • Mono Layer Blown Film Machine Export
  • Mono Layer Blown Film Machine in India
  • Mono Layer Blown Film Machine in Ahmedabad
  • Mono Layer Blown Film Machine on Youtube
  • Mono Layer Blown Film Machine on Google
  • Mono Layer Blown Film Machine Blog
  • Mono Layer Blown Film Machine India in Ahmedabad
  • Mono Layer Blown Film Making Machine
  • Mono Layer Blown Film Plant
  • #Mono #Layer #Blown #Film #Machine

MONO LAYER BLOWN FILM PLANT – MACHINE – PLANT – LINE

 

Mono Layer Blown Film Machine gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, Mono Layer Blown Film Machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

  • Blown Film Machinery
  • Monolayer blown film machine
  • Multilayer blown film machine
  • A-B-A blown film machine
  • Co extrusion blown film machine
  • 3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?Mono Layer Blown Film Machine?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of “legs”; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Mono Layer Blown Film Machine & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
Mono Layer Blown Film Machine, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine Mono Layer Blown Film Machine PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Cast Film Making Plant

April 21, 2018 • Mrunal Ramanuj

  • Cast Film Making Plant
  • Cast Film Making Plant India
  • Cast Film Making Plant Machine
  • Cast Film Making Plant Manufacturer
  • Cast Film Making Plant Line
  • Cast Film Making Plant Unit
  • Cast Film Making Plant Export
  • Cast Film Making Plant in Ahmedabad
  • Cast Film Making Plant Machine Manufacturer
  • Cast Film Making Plant Line Machine
  • #Cast #Film #Making #Plant

 

Cast Film Making Plant produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products. To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films and Blister films.

The Cast Film Making Plant process is gaining increased popularity and enjoying sustained growth worldwide. New lines are being installed in a significant number and the market segments penetrated by this technology are on the rise. This article identifies the main components of a cast extrusion line and presents the fundamental aspects that require consideration when approaching cast film technology.

 

Applications of Cast Film Making Plant:

Cast Film Making Plant are used for food and textiles packaging, flower wrapping, as photo album page protectors, as coating substrates in extrusion coating processes or laminated to other materials in the formation of more complex films, among others. Typically, the cast film process involves the use of coextrusion, which is a simultaneous extrusion of two or more materials from a single die to form a multi-layered film. This is because in many cases the final application of the plastic film demands a performance that cannot be achieved if the film is composed of only one material. For example, in many instances food packaging applications require the use of films with oxygen barrier capabilities. To meet the requirement a high oxygen barrier material like EVOH is combined with polyolefin materials in a multi-layered structure. Coextruded films typically contain up to seven layers; however, the use of more layers is becoming more common. The number of layers, their position in the coextrudate and their individual thickness are all variables that change depending on the particular application of the film.

Benefits/Limitations of Cast Film Making Plant:-

Unlike the Cast Film Making Plant, the cooling of the film with cast extrusion is highly efficient. This allows for higher production line speeds resulting in higher production rates with superior optical properties of the product. The degree of draw and orientation is significantly lower in the cast film process than in the blown film process. This is the reason why the thickness distribution

in the machine cross direction is more uniform with cast processes (with variations that could be as low as ± 1.5%)

In cast extrusion the edges of the film are trimmed due to dimensional irregularities and/or poor layer distribution. As a result, the process can be negatively affected if the trimmed material cannot be recycled. Recent flat die system technology has minimized this problem by significantly reducing the amount of wasted material in coextrusion processes. This subject will be covered to some extent in a subsequent section
The table below shows the specifications of these coextruded films. In the structures, EVOH is used to provide the oxygen barrier, the presence of PP as a skin layer facilitates the thermoformability of the film, and the PE used as a skin layer acts as a heat-sealing material. Combining PVdC with EVOH is an effective way to address the potential loss of oxygen barrier capabilities experienced by the EVOH when exposed to moisture like in the case of meat packaging. Nylon material is used in combination with EVOH to provide added barrier when the film is to be thermoformed and the rigidity of the EVOH limits the thickness of the EVOH layer.

Introduction of Cast Film Making Plant
Stretch cling film machine mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers Cast Film Making Plant
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.

Thickness to be produced: 0.01mm-0.05mm
2. Use:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc.
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc.
3) Rotational twist: Rolling paper, carpet etc.
4) Binding: Glass container, acceptance etc.
5) Break-bulk packaging: Soybean, grain, plastic particle etc.
6) Storage packaging: Such as grass.
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc.
8) Ring twist packaging: Type, wire, cable, steel silk etc.

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Cast Film Making Machine

April 21, 2018 • Mrunal Ramanuj

 

 

 

  • Cast Film Making Machine
  • Cast Film Making Machine India
  • Cast Film Making Machine Manufacturer
  • Cast Film Making Machine Plant
  • Cast Film Making Machine Line
  • Cast Film Making Machine Unit
  • Cast Film Making Machine Export
  • Cast Film Making Machine in Ahmedabad
  • Cast Film Making Machine India in Ahmedabad
  • Cast Film Making Machine Plant in India
  • Cast Film Making Machine Manufacturer in India
  • Cast Film Making Machine Manufacturer in Ahmedabad
  • #Cast #Film #Making #Machine

 

Cast Film Making Machine produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products. To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films and Blister films.

The Extrusion Cast Sheet Line process is gaining increased popularity and enjoying sustained growth worldwide. New lines are being installed in a significant number and the market segments penetrated by this technology are on the rise. This article identifies the main components of a cast extrusion line and presents the fundamental aspects that require consideration when approaching cast film technology.

 

 

Applications of Cast Film Making Machine:

Cast Film Making Machine are used for food and textiles packaging, flower wrapping, as photo album page protectors, as coating substrates in extrusion coating processes or laminated to other materials in the formation of more complex films, among others. Typically, the cast film process involves the use of coextrusion, which is a simultaneous extrusion of two or more materials from a single die to form a multi-layered film. This is because in many cases the final application of the plastic film demands a performance that cannot be achieved if the film is composed of only one material. For example, in many instances food packaging applications require the use of films with oxygen barrier capabilities. To meet the requirement a high oxygen barrier material like EVOH is combined with polyolefin materials in a multi-layered structure. Coextruded films typically contain up to seven layers; however, the use of more layers is becoming more common. The number of layers, their position in the coextrudate and their individual thickness are all variables that change depending on the particular application of the film.

Benefits/Limitations of Cast Film Making Machine

Unlike the blown film process, the cooling of the film with cast extrusion is highly efficient. This allows for higher production line speeds resulting in higher production rates with superior optical properties of the product. The degree of draw and orientation is significantly lower in the cast film process than in the blown film process. This is the reason why the thickness distribution

in the machine cross direction is more uniform with cast processes (with variations that could be as low as ± 1.5%)

In Cast Film Making Machine the edges of the film are trimmed due to dimensional irregularities and/or poor layer distribution. As a result, the process can be negatively affected if the trimmed material cannot be recycled. Recent flat die system technology has minimized this problem by significantly reducing the amount of wasted material in coextrusion processes. This subject will be covered to some extent in a subsequent section
The table below shows the specifications of these coextruded films. In the structures, EVOH is used to provide the oxygen barrier, the presence of PP as a skin layer facilitates the thermoformability of the film, and the PE used as a skin layer acts as a heat-sealing material. Combining PVdC with EVOH is an effective way to address the potential loss of oxygen barrier capabilities experienced by the EVOH when exposed to moisture like in the case of meat packaging. Nylon material is used in combination with EVOH to provide added barrier when the film is to be thermoformed and the rigidity of the EVOH limits the thickness of the EVOH layer.

Introduction of Cast Film Making Machine
Stretch cling film machine mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.

Double layers PE Cast Film Making Machine Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.

Thickness to be produced: 0.01mm-0.05mm
2. Use: 
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc.
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc.
3) Rotational twist: Rolling paper, carpet etc.
4) Binding: Glass container, acceptance etc.
5) Break-bulk packaging: Soybean, grain, plastic particle etc.
6) Storage packaging: Such as grass.
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc.
8) Ring twist packaging: Type, wire, cable, steel silk etc.

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

 

Multilayer Blown Film Machine

March 10, 2018 • Mrunal Ramanuj

Multilayer Blown Film Machine

Multilayer Blown Film Machine India

Multilayer Blown Film Machine Manufacturer

Multilayer Blown Film Machine in Ahmedabad

Multilayer Blown Film Machine Plant

Multilayer Blown Film Machine Line

Multilayer Blown Film Machine Unit

Multilayer Blown Film Machine Export

Multilayer Blown Film Machine Manufacturer in India

Multilayer Blown Film Machine Manufacturer in Ahmedabad

Multilayer Blown Film Making Machine

Multilayer Blown Film Making Machine in India

Multilayer Blown Film Making Machine in Ahmedabad

#Multilayer #Blown #Film #Machine#

 

 

Multilayer Blown Film Machine such as Monolayer Blown Film Plant, Multilayer Blown Film Plant, High Speed Blown Film Plant, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

 

Multilayer Blown Film Machine. The offered blown film plant is used for making the plastic film or sheet. This Multilayer Blown Film Machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered Multilayer Blown Film Machine is examined under the direction of professionals to ensure the flawlessness.

Features of Multilayer Blown Film Machine:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Multilayer Blown Film Machine:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 

Multilayer Blown Film Machine . This Multilayer Blown Film Machine is checked at our end on various parameters in order to deliver a flawless range. Offered Multilayer Blown Film Machine is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Multilayer Blown Film Machine:

  • Light weight
  • Easy to install
  • Long service life

 


Other Details of Multilayer Blown Film Machine:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Multilayer Blown Film Machine:

  • Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

Multilayer Blown Film Plant

March 10, 2018 • Mrunal Ramanuj

Multilayer Blown Film Plant

Multilayer Blown Film Plant India

Multilayer Blown Film Plant Machine

Multilayer Blown Film Plant Manufacturer

Multilayer Blown Film Plant In Ahmedabad

Multilayer Blown Film Plant Line

Multilayer Blown Film Plant Unit

Multilayer Blown Film Plant Export

Multilayer Blown Film Plant Manufacturer in India

Multilayer Blown Film Plant Machine in Ahmedabad

Multilayer Blown Film Making Plant

Multilayer Blown Film Making Plant in India

 

Multilayer Blown Film Plant such as Monolayer Blown Film Plant, Multilayer Blown Film Plant, High Speed Blown Film Plant, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

 

Multilayer Blown Film Plant. The offered blown film plant is used for making the plastic film or sheet. This Multilayer Blown Film Plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered Multilayer Blown Film Plant is examined under the direction of professionals to ensure the flawlessness.

Features of Multilayer Blown Film Plant:

  • Easy installation
  • Rugged design
  • Low maintenance cost

 


Applications of Multilayer Blown Film Plant:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered Multilayer Blown Film Plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Multilayer Blown Film Plant:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Multilayer Blown Film Plant:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Multilayer Blown Film Plant:

  • Multilayer Blown Film Plant are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

 

PP TQ Blown Film Machine Manufacturer

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Machine Manufacturer

PP TQ Blown Film Machine Manufacturer India

PP TQ Blown Film Machine Manufacturer Plant

PP TQ Blown Film Machine Manufacturer Line

PP TQ Blown Film Machine Manufacturer Unit

PP TQ Blown Film Machine Manufacturer Export

PP TQ Blown Film Machine Manufacturer in Ahmedabad

PP TQ Blown Film Machine Manufacturer in India

#PP#TQ#Blown#Film#Machine#Manufacturer#

 

 

 

PP TQ Blown Film Machine Manufacturer

This extensive range of PP TQ Blown Film Machine Manufacturer include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our PP TQ Blown Film Machine Manufacturer and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Machine Manufacturer are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, PP TQ Blown Film Machine Manufacturer are available with Rotating die.

This PP TQ Blown Film Machine Manufacturer incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Machine Manufacturer. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Machine Manufacturer can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP Blown Film Plant. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Machine Manufacturer:

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Machine Manufacturer:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Machine Manufacturer:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Advantages of PP TQ Blown Film Machine Manufacturer:

  • Low Capital
  • Low Space Requirement
  • Lower Operating Cost
  • Less Demanding Operating Skills
  • Ease in Changing the Width/Thickness of Film
  • Tubular film is an added Advantage in Manufacturing of Pouches/Bags
  • Soft in Feel
  • Lower Sealing Temperature
  • Good dart impact and tear Strength
  • Good Process ability
  • High melt Strength
  • Good Gloss and Clarity
  • Lower melting Temperature, Hence Lower Processing Conditions
  • Lower Sealing Temperatures
  • Better Sealing Characteristics
  • Better Mechanical Properties

 

 

Typical Applications of PP TQ Blown Film Machine Manufacturer:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

 

OPTIONAL ATTACHMENTS of PP TQ Blown Film Machine Manufacturer:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

 

Features of PP TQ Blown Film Machine Manufacturer:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Machine Manufacturer:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Machine Manufacturer:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Machine Manufacturer

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Machine Manufacturer

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

PP TQ Blown Film Making Machine

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Making Machine

PP TQ Blown Film Making Machine India

PP TQ Blown Film Making Machine Manufacturer

PP TQ Blown Film Making Machine Plant

PP TQ Blown Film Making Machine Line

PP TQ Blown Film Making Machine Unit

PP TQ Blown Film Making Machine Export

PP TQ Blown Film Making Machine Manufacturer India

PP TQ Blown Film Making Machine in Ahmedabad

#PP#TQ#Blown#Film#Making#Machine#

 

 

PP TQ Blown Film Making Machine

This extensive range of PP TQ Blown Film Making Machine include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our Blown Film Plants and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Making Machine are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, mono and two layer lines are available with Rotating die.

This PP TQ Blown Film Making Machine incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Making Machine. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Making Machine can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Making Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP TQ Blown Film Making Machine. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Making Machine

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Making Machine:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Making Machine:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Typical Applications of PP TQ Blown Film Making Machine:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

OPTIONAL ATTACHMENTS of PP TQ Blown Film Making Machine:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

Features of PP TQ Blown Film Making Machine:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Making Machine:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Making Machine:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Making Machine

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Making Machine

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Making Machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

PP TQ Blown Film Machine in India

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Machine in India

PP TQ Blown Film Machine in India Manufacturer

PP TQ Blown Film Machine in India Plant

PP TQ Blown Film Machine in India Line

PP TQ Blown Film Machine in India Unit

PP TQ Blown Film Machine in India Export

PP TQ Blown Film Making Machine

PP TQ Blown Film making Machine in India

PP TQ Blown Film Machine Manufacturer in India 

#PP#TQ#Blown#Film#Machine#in#India#

 

 

 

 

PP TQ (Polyproplene) BLOWN  FILM PLANT

This extensive range of PP TQ Blown Film Machine in India include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our PP TQ Blown Film Machine in India and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded blown film lines are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion PP TQ Blown Film Machine in India is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, mono and two layer lines are available with Rotating die.

This PP TQ Blown Film Machine in India incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Machine in India. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP TQ Blown Film Machine in India is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Machine in India can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP-TQ blown film machine is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP Blown Film Plant. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

 

Today  for growth of PP TQ Blown Film Machine in India:

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Machine in India:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Machine in India:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Advantages of PP TQ Blown Film Machine in India:

  • Low Capital
  • Low Space Requirement
  • Lower Operating Cost
  • Less Demanding Operating Skills
  • Ease in Changing the Width/Thickness of Film
  • Tubular film is an added Advantage in Manufacturing of Pouches/Bags
  • Soft in Feel
  • Lower Sealing Temperature
  • Good dart impact and tear Strength
  • Good Process ability
  • High melt Strength
  • Good Gloss and Clarity
  • Lower melting Temperature, Hence Lower Processing Conditions
  • Lower Sealing Temperatures
  • Better Sealing Characteristics
  • Better Mechanical Properties

 

Typical Applications of PP TQ Blown Film Machine in India:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

OPTIONAL ATTACHMENTS of PP TQ Blown Film Machine in India:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

 

Features of PP TQ Blown Film Machine in India:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Machine in India:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Machine in India:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

 

PP TQ Blown Film Machine in India

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP Tubing Film Plant

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Machine in India is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com