Skip to Content

Tag: Blown Film Machine Manufacturer

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Blown Film Line

June 6, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Line
  • Blown Film Line India
  • Blown Film Line in Ahmedabad
  • Blown Film Line Manufacturer
  • Blown Film Line Plant
  • Blown Film Line Unit
  • Blown Film Line Export
  • Blown Film Line Machine Manufacturer
  • Blown Film Line Machine India
  • Blown Film Line Machine in Ahmedabad
  • Blown Film Making Line
  • Blown Film Line Machine Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Line manufacturer Ocean Extrusions Pvt. Ltd.,
  • Ocean Extrusions Pvt. Ltd.,

Blown Film Line Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Line:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

 

  • Feature of Blown Film Line :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

https://www.youtube.com/watch?v=5di_u-s3Hyc

  • Materials of Blown Film Line :-
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Blown Film Line Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Plant

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Blown Film Plant
  • Blown Film Plant India
  • Blown Film Plant in Ahmedabad
  • Blown Film Plant Manufacturer
  • Blown Film Plant Line
  • Blown Film Plant Unit
  • Blown Film Plant Export
  • Blown Film Plant Machine
  • Blown Film Plant Manufacturer
  • Blown Film Plant on Google
  • Blown Film Plant on Youtube
  • Blown Film Plant on twitter
  • Blown Film Plant on Facebook
  • Blown Film Plant Machine in Ahmedabad
  • Blown Film Plant Machine in India

Blown Film Plant Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

Multi Layer Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil.... blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

Blown Film Plant including with various technical specifications like maximum output, extruder details, two station surface winder and operating requirement. If you want to know about more specifications then visit at http://www.oceanextrusions.com/multil….
Blown Film Plant pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film

  • Blown Film Plant:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Plant :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Plant Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine

June 6, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine on Google
  • Blown Film Machine on Youtube
  • Blown Film Machine on twitter
  • Blown Film Machine Plant India
  • Blown Film Machine Plant in Ahmedabad
  • Blown Film Making Machine
  • Blown Film Making Machine India
  • Blown Film Making Machine in Ahmedabad

Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Blown Film Machine:-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

Materials

Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Blown Film Machine Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine Manufacturer India

June 6, 2018 • Mrunal Ramanuj

Manufacturer by Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine Manufacturer India
  • Blown Film Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Plant
  • Blown Film Machine Manufacturer India Line
  • Blown Film Machine Manufacturer India Manufacturer
  • Blown Film Making Machine Manufacturer India
  • Blown Film Making Machine Manufacturer India in Ahmedabad
  • Blown Film Machine Manufacturer India Unit
  • Blown Film Machine Manufacturer India Export
  • Blown Film Machine Manufacturer India Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Machine Manufacturer India Ocean Extrusions Pvt. Ltd.,

Double-Layer Co-Extrusion Blown Film Machine Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Two Layer Blown Film Machine :-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m

  • Feature of Two Layer Blown Film Machine :-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

  • Materials
  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Multi-Layer Film Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Small Layers Of Special Adhesive Resins Are Used In Between.

Blown Film Machine Manufacturer in India

February 27, 2018 • Mrunal Ramanuj

Blown Film Machine Manufacturer in India

Blown Film Machine Manufacturer in India Plant

Blown Film Machine Manufacturer in India Line

Blown Film Machine Manufacturer in India Unit

Blown Film Machine Manufacturer in India Export

Blown Film Making Machine

Blown Film Machine Manufacturer India

#Blown#Film#Machine#Manufacturer#in#India#

 

 

Blown Film Machine Manufacturer in India – MACHINE – LINE – PRESS

Blown Film Machine Manufacturer in India are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Blown Film Machine Manufacturer in India material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Machine Manufacturer in India is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blown Film Machine Manufacturer in India can also be produced with this machine.

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, Blown Film Machine Manufacturer in India, monofilament plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Blown Film Machine Manufacturer in India : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geo membrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Machine Manufacturer in India, blown film plant, blown film extruder, Blown Film Machine Manufacturer in India and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags Blown Film Machine Manufacturer in India multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Blown Film Machine Manufacturer in India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Machine Manufacturer in India carry bag making machine blown film plant Multilayer Blown Film.

Blown Film Machine Manufacturer in India such as Monolayer Blown Film Plant, Multilayer Blown Film Plant, Blown Film Machine Manufacturer in India, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

Blown Film Machine Manufacturer in India. The offered blown film plant is used for making the plastic film or sheet. This Blown Film Machine Manufacturer in India is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of Blown Film Machine Manufacturer in India:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Blown Film Machine Manufacturer in India:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 

Blown Film Machine Manufacturer in India. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Blown Film Machine Manufacturer in India:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Blown Film Machine Manufacturer in India:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Blown Film Machine Manufacturer in India:

  • Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Blown Film Making Machine

February 27, 2018 • Mrunal Ramanuj

Blown Film Making Machine

Blown Film Making Machine India

Blown Film Making Machine Manufacturer

Blown Film Making Machine Plant

Blown Film Making Machine Line

Blown Film Making Machine Unit

Blown Film Making Machine Export

Blown Film Making Machine India

Blown Film Making Machine Plant Line

Blown Film Making Machine in India

Blown Film Making Machine in Ahmedabad

#Blown#Film#Making#Machine#

Blown Film Making Machine – MACHINE – LINE – PRESS

Blown Film Making Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Blown Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Making Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blown Film Making Machine can also be produced with this machine.

 

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, Blown Film Making Machine, monofilament plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Blown Film Making Machine : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geo membrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Making Machine, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Blown Film Making Machine such as Monolayer Blown Film Plant, Multilayer Blown Film Plant, High Speed Blown Film Plant, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

Blown Film Making Machine. The offered blown film plant is used for making the plastic film or sheet. This Blown Film Making Machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of Blown Film Making Machine:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Blown Film Making Machine:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 


Features of Blown Film Making Machine:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Blown Film Making Machine:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Blown Film Making Machine:

  • Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147

Blown Film Plant

February 27, 2018 • Mrunal Ramanuj

Blown Film Plant

Blown Film Plant India

Blown Film Plant Machine

Blown Film Plant Manufacturer

Blown Film Plant Line

Blown Film Plant Unit

Blown Film Plant Export

Blown Film Plant Making Machine

Blown Film Plant Making Machine India

Blown Film Plant Manufacturer India

 

 

#Blown#Film#Plant#

 

Blown Film Plant – MACHINE – LINE – PRESS

Blown Film Plant are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Blown Film Plant material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blown Film Plant can also be produced with this machine.

 

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, PP-TQ blown film plant, Blown Film Plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Blown Film Plant : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geo membrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film Plant Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant ABA Multi layer Blown Film Plant blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high – speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Blown Film Plant such as Blown Film Plant, Multilayer Blown Film Plant, High Speed Blown Film Plant, Blown Film Line, Blown Film Machine, Two Layer Blown Film Plant

Blown Film Plant. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness.

Features of Blown Film Plant:

  • Easy installation
  • Rugged design
  • Low maintenance cost


Applications of Blown Film Plant:

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Construction Roofing sheet, Green House films
  • Packaging of frozen foods
  • Wrappers for food products, laundry and Garbage bag
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags

 

Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Blown Film Plant:

  • Light weight
  • Easy to install
  • Long service life


Other Details of Blown Film Plant:

  • Minimise the cost of raw material.
  • Combination of different raw material.
  • Oscillating take-off unit is equip for get uniformly thickness of the film.
  • Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
  • Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
  • This machine could be combined different characteristics of plastic raw material in the same work.
  • Oscillating take-off unit is driven by heavy duty gear transmission system.
  • The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
  • Its rotational angle could be attained to 359°.
  • It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
  • Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
  • The tonsillitis is controlled by low friction cylinder.
  • The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
  • We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of Blown Film Plant

:

  • Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
  • Water Pouch Film
  • Milk Film
  • Edible Oil Film
  • Lamination Film
  • Liquid Packaging
  • Tea Packaging
  • Tomato Catch Up Packaging
  • Food Packaging Film
  • Stretch Cling Film

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Blown Film Extrusion Machine

December 27, 2017 • Mrunal Ramanuj

Blown Film Extrusion Machine

Blown Film Extrusion Machine India

Blown Film Extrusion Machine Plant

Blown Film Extrusion Machine Manufacturer

Blown Film Extrusion Machine Exporter

Blown Film Extrusion Machine Line Plant Unit

Blown Film Machine Exporter

Blown Film Machine India

Blown Film Machine Manufacturer

Blown Film Line

Blown Film India

Blown Film Machine

Blown Making Machine

Plastic Blown Film Machine

Plastic Extrusion Machine

Blown Film Extrusion Plant

Blown Making Machine

Plastic Carry Bag Making Machine

Plastic Blown Extruder Line

Plastic Processing Machine

Plastic Extrusions Machine

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.

Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high – speed plants can give processors the competitive edge and quick return on their investment.

Two layer ABA Die blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Features :

  • Manual as well as pneumatic screen changer
  • Oscillating haul-off
  • Internal bubble cooling
  • Automatic bubble cage
  • Online thickness monitoring AND surface winders with taper tension Control.

Applications :

  • Film for Shopping Bags
  • Film for Liners
  • Stretch Film
  • Shrink Film
  • Lamination Film
  • Biodegradable Film

Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office :

Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.

Email: sales@oceanextrusions.com, export@oceanextrusions.com

Web:
http://www.oceanextrusions.com/

http://www.oceanextrusion.com/

http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

http://www.plasticextrusionmachinemanufacturer.com/

Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-97243 33147