Skip to Content

Tag: Blog

Blown Film Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Blown Film Machine
  • Blown Film Machine India
  • Blown Film Machine in Ahmedabad
  • Blown Film Machine Plant
  • Blown Film Machine Line
  • Blown Film Machine Manufacturer
  • Blown Film Machine Unit
  • Blown Film Machine Exporter

  • Introduction
  • Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
  • The Film Blowing Process
  • Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common .
  • This procedure consists of four main steps:
  • The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.
  • Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.
  • The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter .
  • After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.


  • Advantages

  • Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film .
  • Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

  • Disadvantages
  • Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of  chill rolls or water., which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher  specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including  transparency , haze, and gloss.

  • Applications
  • Consumer food wrap from plastic wrap  article.
  • Agricultural  film
  • Bags
  • Industry packaging, shrink film , stretch film
  • Consumer packaging, food wrap, transport packaging ( Figure  )
  • Laminating  film
  • Barrier film
  • Multilayer film

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


 

 

Plastic Dana Making Machine India

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine India in Ahmedabad
  • Plastic Dana Making Machine India Plant
  • Plastic Dana Making Machine India Line
  • Plastic Dana Making Machine India Unit
  • Plastic Dana Making Machine India Exporter
  • Plastic Dana Making Machine India Manufacturer



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.



  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,


  • Plastic Dana Making Line
  • Plastic Dana Making Line India
  • Plastic Dana Making Line in Ahmedabad
  • Plastic Dana Making Line Machine
  • Plastic Dana Making Line Manufacturer
  • Plastic Dana Making Line Unit
  • Plastic Dana Making Line Exporter


  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.





  • Plastic Dana Making Plant

  • Plastic Dana Making Plant India
  • Plastic Dana Making Plant in Ahmedabad
  • Plastic Dana Making Plant Line
  • Plastic Dana Making Plant Machine
  • Plastic Dana Making Plant Manufacturer
  • Plastic Dana Making Plant Unit
  • Plastic Dana Making Plant Exporter

  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.



  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Dana Making Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.




  • Plastic Dana Making Machine

  • Plastic Dana Making Machine India
  • Plastic Dana Making Machine in Ahmedabad
  • Plastic Dana Making Machine Plant
  • Plastic Dana Making Machine Line
  • Plastic Dana Making Machine Manufacturer
  • Plastic Dana Making Machine Unit
  • Plastic Dana Making Machine Exporter

https://www.youtube.com/watch?v=45Mrcqihyj0

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • https://www.youtube.com/watch?v=45Mrcqihyj0
  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Line
  • Plastic Reprocess Line India
  • Plastic Reprocess Line in Ahmedabad
  • Plastic Reprocess Line Plant
  • Plastic Reprocess Line Machine
  • Plastic Reprocess Line Unit

Plastic Reprocess Line Exporter



  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

 

 


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Plant

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Plant
  • Plastic Reprocess Plant India
  • Plastic Reprocess Plant in Ahmedabad
  • Plastic Reprocess Plant Line
  • Plastic Reprocess Plant Manufacturer
  • Plastic Reprocess Plant Machine
  • Plastic Reprocess Plant Unit
  • Plastic Reprocess Plant Exporter

  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,

Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430

 

Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.



  • Plastic Reprocess Machine
  • Plastic Reprocess Machine India
  • Plastic Reprocess Machine in Ahmedabad
  • Plastic Reprocess Machine Plant
  • Plastic Reprocess Machine Line
  • Plastic Reprocess Machine Manufacturer
  • Plastic Reprocess Machine Unit
  • Plastic Reprocess Machine Exporter


  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,


  • Factory Add : –
    Ocean Extrusions Pvt Ltd
    Plot No. 01, Survey No. 325,
    B/h. Jalaram Saw Mill,
    Kujad, Daskroi,
    Ahmedabad, Gujarat, INDIA – 382430


  • Corporate Office :-
    Ocean Extrusions Pvt Ltd
    B-101, First Floor,
    Galaxy Business Park,
    Torrent Power Station,
    Sardar Patel ( SP ) Ring Road,
    Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Line

August 23, 2018 • Mrunal Ramanuj

Ocean Extrusions Pvt. Ltd.,



Plastic Recycling Plant



  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.


  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Plant

August 23, 2018 • Mrunal Ramanuj


Ocean Extrusions Pvt. Ltd.,




  • Plastic Recycling Plant

  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.


  • Other processes

  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.


  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,


Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Plastic Recycling Machine

August 23, 2018 • Mrunal Ramanuj

                                                                                     Ocean Extrusiosn Pvt. Ltd.

  • Plastic Recycling Machine
  • Plastic Recycling Machine India
  • Plastic Recycling Machine in Ahmedabad
  • Plastic Recycling Machine Plant
  • Plastic Recycling Machine Line
  • Plastic Recycling Machine Manufacturer
  • Plastic Recycling Machine Unit
  • Plastic Recycling Machine Exporter



  • Plastic Recycling Plant
  • Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.
  • Plastic Waste Recycling Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.
  • Plastic Waste Recycling Plant includes taking any type of plastic sorting it into different Ocean Extrusions Pvt. Ltd., and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.
  • Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The Ocean Extrusions Pvt. Ltd., is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.
  • The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.
  • The use of biodegradable plastic is increasing.

  • Other processes
  • A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

  • Application
  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

  • Tags
  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Factory Add : –
Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430


Corporate Office :-
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.


Email:
sales@oceanextrusions.com,
oceanextrusions@gmail.com,

Web:
http://www.oceanextrusions.com/
http://www.oceanextrusion.com/
http://www.blownfilmline.in/

http://www.oceanextrusionsmachine.com/

Categories: plastic recycling machine Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Extrusions Lamination Machine

June 8, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Extrusions Lamination Machine
  • Extrusions Lamination Machine India
  • Extrusions Lamination Machine in Ahmedabad
  • Extrusions Lamination Machine Plant
  • Extrusions Lamination Machine Line
  • Extrusions Lamination Machine Manufacturer
  • Extrusions Lamination Machine Unit
  • Extrusions Lamination Machine Export
  • Extrusions Lamination Machine Manufacturer India
  • Extrusions Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Lamination Making Machine
  • Extrusions Lamination Making Machine India
  • Extrusions Lamination Making Machine in Ahmedabad
  • Extrusions Lamination Machine Manufacturer Ocean Extrusions Pvt. Ltd.,

Product Description of Extrusions Lamination Machine:-

Co-extrusion is a process of extruding a multi-layer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                          Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die

The advantages of barrier coextrusion are to obtain a multilayer material in one operation and to use only a thin layer of expensive barrier material coextruded with cheaper supports and dry adhesives.  In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.

The first is just the most used in the Industry with Single Extruder and Single Die Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Multiple Extruder and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Normal Single Extruder and Single Die Lamination Plant . There are certain Applications in Extrusion Coating where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Extrusions Coating Lamination Machine Manufacturer

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India
  • Extrusions Coating Lamination Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Machine Manufacturer Plant
  • Extrusions Coating Lamination Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Unit
  • Extrusions Coating Lamination Machine Manufacturer Export
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Making Machine Manufacturer India
  • Extrusions Coating Lamination Making Machine Manufacturer in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer Plant
  • Extrusions Coating Lamination Making Machine Manufacturer Line
  • Extrusions Coating Lamination Machine Manufacturer Plant

Product Description of Extrusions Coating Lamination Machine Manufacturer:-


Extrusions Coating Lamination Machine Manufacturer is a process of Extrusions Coating Lamination Machine Manufacturer structure with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                    Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine Manufacturer are to obtain a Extrusions Coating Lamination Machine Manufacturer material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine Manufacturer with cheaper supports and dry adhesives.                                                                                                                                                                                                                                                                                                      In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Manufacturer Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine Manufacturer and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine Manufacturer. There are certain Applications in Extrusions Coating Lamination Machine Manufacturer where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film .


Feature of Extrusions Coating Lamination Machine Manufacturer:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine Manufacturer:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine Manufacturer:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination

Extrusions Coating Lamination Machine

June 8, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Extrusions Coating Lamination Machine
  • Extrusions Coating Lamination Machine India
  • Extrusions Coating Lamination Machine in Ahmedabad
  • Extrusions Coating Lamination Machine Plant
  • Extrusions Coating Lamination Machine Line
  • Extrusions Coating Lamination Machine Manufacturer
  • Extrusions Coating Lamination Making Machine
  • Extrusions Coating Lamination Making Machine India
  • Extrusions Coating Lamination Making Machine in Ahmedabad
  • Extrusions Coating Lamination Making Machine Manufacturer
  • Extrusions Coating Lamination Machine Manufacturer India

  Product Description of Extrusions Coating Lamination Machine:-


Extrusions Coating Lamination Machine is a process of extruding a Extrusions Coating Lamination Machine with two or more type of resins without premixed through one die simultaneously, so that all the different resins come together as a single proportionally assigned integral structure                                                                                                                                                                                                                                                                                                                                                                                        Through a feedblock, each layer is carefully calculated; assigned and extruded through one single T-die.


The advantages of barrier Extrusions Coating Lamination Machine are to obtain a Extrusions Coating Lamination Machine material in one operation and to use only a thin layer of expensive barrier material Extrusions Coating Lamination Machine with cheaper supports and dry adhesives. In most of cases, expensive adhesive will be used in bonding no-porous material with minimum volume to achieve sufficient bonding strength.


The first is just the most used in the Industry with Extrusions Coating Lamination Machine Which comes with a Turn Bar Attachment for both side lamination for Raffia(Woven Sack) or Rice bags which is designed for Laminating of Printed Bopp Rolls to sandwich on PP or HDPE make bags . Apart from rice bags it is used for Fertilizer bags , Cement bags , etc , similar way the Tandem and Extrusions Coating Lamination Machine and Die Machine has Capability to run the same Applications as mentioned however the Production Capacity and Waste certainly differs than Extrusions Coating Lamination Machine. There are certain Applications in Extrusions Coating Lamination Machine where in it just requires Coating of thin layer of LDPE or PP like Tarapaulin , Paper , Metalize Film.


Feature of Extrusions Coating Lamination Machine:-

  • Wide range of extrusion lines suitable for Woven / Non Woven Fabric Lamination, Paper Lamination & BOPP sandwich lamination with LDPE or PP material
  • High productivity with less power consumption
  • Coating output starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Smooth Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Lever type filter changer
  • Uniquely designed coat hanger type ‘T’ die ensuring uniform flow distribution
  • Unwinder unit with load cell based auto web tension control
  • Heavy duty safety chucks with airshafts
  • Web aligner unit
  • Crease removal banana roller
  • Lamination unit forward-reverse & up-down arrangements
  • Center type, surface type or turret type rewinding options to suit different requirements
  • High density band type and cartridge type heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

OPTIONAL of Extrusions Coating Lamination Machine:-

  • Hydraulically Operated Filter Changer
  • Turn Bar Arrangement
  • Sandwich Lamination
  • Corona Treater
  • Auto Hopper Loader Cum Dryer
  • Water Chilling Plant

Aplication of Extrusions Coating Lamination Machine:-

  • PP/HDPE Woven Fabric Lamination
  • PP Non Woven Fabric Lamination
  • Tarpaulin Lamination
  • BOPP Sandwich Lamination
  • Paper Lamination
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Multilayer Blown Film Plant

June 7, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

 

  • Multilayer Blown Film Plant
  • Multilayer Blown Film Plant India
  • Multilayer Blown Film Plant in Ahmedabad
  • Multilayer Blown Film Plant Manufacturer
  • Multilayer Blown Film Plant Line
  • Multilayer Blown Film Plant Machine
  • Multilayer Blown Film Plant Unit
  • Multilayer Blown Film Plant Export
  • Multilayer Blown Film Plant Manufacturer India
  • Multilayer Blown Film Plant Manufacturer in Ahmedabad
  • Multilayer Blown Film Plant Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Multilayer Blown Film Making Machine Plant
  • Multilayer Blown Film Making Machine Plant  in Ahmedabad
  • Multilayer Blown Film Making Machine Manufacturer

Multilayer
OEPL has been catering to the rapidly growing needs of the flexible packaging industry. With the objective of meeting the new challenges faced by the OEPL for improved film properties and cost optimizations, OEPL has been in the forefront of introducing Multilayer Blown Film Plant with latest technology like Internal Bubble Cooling (), Oscillating Haul-off and Advanced Winding Solutions.
OEPL’s power efficient, high speed Multilayer Blown Film Plant gives the advantages of lower conversion costs, high outputs and excellent film quality, providing processors the competitive edge and quick return on their investment.
Multilayer Blown Film Plant are equipped with advanced CAD Design dies to ensure uniform flow distribution, excellent melt characteristics and film quality.
A crucial Internal Bubble Cooling () mechanism facilitates higher output, optimum thickness randomisation of minimum conversion cost.
A special Air Cooling Ring enhances optical and mechanical properties of film and output.
A state of the art Oscillating Haul-off Unit provides Excellent Gauge Randomization, Improved Roll Geometry and Film Quality. The film winders provide superb quality rolls for tension sensitive films.
The Film line assembly is backed up by Computer Integrated Control Systems to achieve stage by stage production management and product quality control.

Multilayer Blown Film Plant are used for varied crucial applications in flexible packaging, which demand vital film properties like dart impact, strength, puncture resistance, hot tack strength, gloss, etc.


  • Feature of Multilayer Blown Film Plant:-

  • Unique design to suit various materials
  • Output range starting from 50 Kgs/Hr to upto 300 Kgs/hr
  • Grooved Feed type Nitrided Barrels
  • Simple or Barrier type Nitrided Screws
  • Helical gear box with inbuilt thrust bearing
  • Uniquely designed spiral type of Co-Ex- ABC die suitable for LDPE-LLDPE materials
  • Uniquely designed dual lip air cooling ring for higher output
  • High velocity air ring blower with AC invertor drive
  • Bubble Calibrating BasOEPL
  • Vertical type / Horizontal type oscillating haul-off unit for gauge randomization
  • Web aligner system
  • Two station semi-automatic surface type rewinder
  • Centre & Side slitting arrangement
  • High density ceramic type band heaters
  • SSR based all heating zones
  • Single point synchronization of whole line with AC motors and AC invertor drives

  • Optional of Multilayer Blown Film Plant:-

  • Bimetallic Screw & Barrel
  • Fully Automatic Winder With PLC Controls
  • Trimming Arrangement With Suction Blower
  • Corona Treater Unit
  • Air Chiller Unit
  • Gravimetric Dossing Unit
  • IPC Based Line Control With PLC

  • Application of Multilayer Blown Film Plant:-

Blown Film Plant India

June 7, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Plant India
  • Blown Film Plant India in Ahmedabad
  • Blown Film Plant India Machine
  • Blown Film Plant India Manufacturer
  • Blown Film Plant India Line
  • Blown Film Plant India Unit
  • Blown Film Plant India Export
  • Blown Film Plant India Manufacturer India
  • Blown Film Plant India Manufacturer in Ahmedabad
  • Blown Film Making Plant India in Ahmedabad
  • Blown Film Making Plant India Manufacturer
  • Blown Film Making Plant Machine

Ocean Extrusions Pvt. Ltd. offers widest range of customized Blown Film Plant India, to suit a broad spectrum of resins, applications and output levels. Customers opting for can therefore be sure to produce best film quality with economical use of resources, short start-up and low change-over times as well as reduced waste and high productivity.


Blown Film Plant India – series of Blown Film Plant India are available with outputs ranging from 30 kg/hr to 1000 kg/hr and lay-flat widths ranging from 50 mm to 5000 mm for processing polymers as diverse as LD, LLD, HM – HDPE, PP. FOILEX – Blown Film Plant India are also available in special configurations to process HDPE rich films both through high stalk bubble and low frost line height bubbles. Blown Film Plant India incorporates advanced features like-grooved feed section, barrier screw, gravimetric blending/dosing system, Liquid PIB dosing system, manual as well as pneumatic screen changer, oscillating haul-off, internal bubble cooling, automatic bubble cage, online thickness monitoring and control and surface winders with taper tension control.


Applications include PE general purpose films, HDPE pick-up bags, shade-net film, PE lamination films, HD twist wrap films, stretch and cling films, shrink films, anti-rust films and paper like films.


Salient Features of Blown Film Plant India:-

  • Suitable Material :-HM-HDPE , LDPE, LLDPE
  • Feed Section:- Grooved Feed
  • Screw Type :- Barrier
  • EN41B material Gas Nitrided Screw and Barrel
  • Helical Gear Box
  • AC Drives for Extruder and Take-Up
  • Lowest Energy Consumption
  • High Output
  • Space Saver

Application

Blown Film Plant India :-

Blown Film Machine India

June 7, 2018 • Mrunal Ramanuj

 

Manufacturer By Ocean Extrusions Pvt. Ltd.,

  • Blown Film Machine India
  • Blown Film Machine India in Ahmedabad
  • Blown Film Machine India Plant
  • Blown Film Machine India Line
  • Blown Film Machine India Manufacturer
  • Blown Film Machine India Manufacturer Ocean Extrusions Pvt. Ltd.,
  • Blown Film Machine India Ocean Extrusions Pvt. Ltd.,
  • Blown Film Making Machine India
  • Blown Film Making Machine India in Ahmedabad
  • Blown Film Making Machine Plant India

Blown Film Machine India Is Suitable For All Kinds Of High-Grade Film Packaging. For Its Good Barrier Property, Keeping Fresh, Well Protected Against Dampness, Frost Proof, Oxygen Insulation, Oil Resistant, This Film Can Be Widely Used In Light And Heavy Package, Such As All Kinds Of Fresh Fruit, Meat, Pickles, Fresh Milk, Liquid Beverage, Medical Supplies And Etc. However, It’s Not Made From Waste Plastic Raw Materials But From Plastic Granules Raw Material.

  • Blown Film Machine India:-
  • Co – Extrusions
  • Extruder Die:-  45mm, 55mm, 65mm, 80mm
  • Output :- 45 – 200 kg/hr
  • Material :- LDPE, LLDPE
  • Film Width From 650 – 1800m


  • Blown Film Machine India:-
  • High Operational Fluency
  • Require Less Maintenance
  • Low Power Consumption

  • Materials

  • Polyethylenes (HDPE, LDPE And LLDPE) Are The Most Common Resins In Use, But A Wide Variety Of Other Materials Can Be Used As Blends With These Resins Or As Single Layers In A Blown Film Machine India Structure. These Include Pp, Pa, Evoh. In Some Cases, These Materials Do Not Gel Together, So A Multi-Layer Film Would Delaminate. To Overcome This, Blown Film Machine India Of Special Adhesive Resins Are Used In Between.

    Application of Blown Film Machine India:-

PP PET Box Strapping Plant

May 17, 2018 • Mrunal Ramanuj
  • PP PET Box Strapping Plant
  • PP PET Box Strapping Plant India
  • PP PET Box Strapping Plant Machine
  • PP PET Box Strapping Plant Manufacturer
  • PP PET Box Strapping Plant LIne
  • PP PET Box Strapping Plant Unit
  • PP PET Box Strapping Plant Export
  • PP PET Box Strapping Plant in Ahmedabad
  • #PP #PET #Box #Strapping #Plant

PP PET Box Strapping Plant

PP PET Box Strapping Plant such as Box Strapping Plant, Automatic Box Strapping Plant, PP Strapping Extrusion Plant, Plastic Strapping Plant, Box Strapping Extrusion Line, Box Strap Line

PP PET Box Strapping Plant

Our offered PP PET Box Strapping Plant is manufactured keeping in mind the industry norms by using advance techniques. Furthermore, this strapping plant known for its user-friendly nature & performance. Offered strapping plant is available in numerous specifications to choose from.

Features of PP PET Box Strapping Plant:

  • Long working life
  • Rigid design
  • High efficiency

 

Application of PP PET Box Strapping Plant:

  • Wooden / Corrugated Box Packing in different industries
  • Textile Cloth Packing
  • Paper Packing
  • Cotton Industry
  • Textile Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry
  • Ceramic Industry

Automatic Box Strapping Plant

The offered strapping plant is suitable for manual clamping application & heat-sealing application. This strapping plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered strapping plant is examined under the direction of professionals to ensure the flawlessness.

Features:

  • Energy efficient
  • Reliable functionality
  • Easy maintenance

Applications:

  • Wooden / Corrugated Box Packing in different industries
  • Textile Cloth Packing
  • Automatic Box Strapping Plant Application:
  • Wooden / Corrugated Box Packing in different industries
  • Textile Cloth Packing
  • Paper Packing
  • Cotton Industry
  • Textile Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry
  • Ceramic Industry
  • Cotton Industry
  • Textile Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry

PP Strapping Extrusion Plant

The provided extrusion plant is available in different specifications as per the requirements of our esteemed clients. This extrusion plant offered by us is used for various packing application in different industries. Customers can avail this extrusion plant from us at affordable rates.

Our technological advanced machinery and plants such as PP/HDPE box strapping plant, reprocessing plant, agglomerate, film compactor, HDPE / PVC pipe plant, box strapping plant, reprocessing plant, mono filament plant, industrial extrusion machinery, plastic film machine, plastics machinery, roto molding machines, blowing machines, jerry can plant, tubing plant, sutli plant and more are widely used across plastic processing industry. Our comprehensive range is designed and developed as per international standards to suit specific needs of the involved processes.

These PP Strapping Extrusion Plant and machineries are provided with precision engineered components to achieve effective operation. Further, they are subject to stringent quality measures to ensure that are free from any type of operational discrepancy while manufacturing plastics string/ sutali . We offer PP Strapping Extrusion Plant in a multitude of specifications to satisfactorily meet the process needs of our clients and their demand.

  • Box Strapping Extrusion Line Application:
  • Wooden / Corrugated Box Packing in different industries
  • Textile Cloth Packing
  • Paper Packing
  • Cotton Industry
  • Textile Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry
  • Ceramic Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry
  • Ceramic Industry

Plastic Box Strapping Plant Extrusion Generates Plastic Sections of Continuous Length through Plastic Extruder. Plastic Granules are melting by required elements through Plastic Extruder to form a furnished product. This Process is carried out through Various Components like Extruder, Quenching tank, first godet, hot water tank, stretching godet, online single color printing machine, embossing unit, Stabilizing unit, third godet unit and wind on core winder.

Plastic Box Strapping Plant Application:

  • Wooden / Corrugated Box Packing in different industries
  • Textile Cloth Packing
  • Paper Packing
  • Cotton Industry
  • Textile Industry
  • Steel Industry
  • Aluminum Industry
  • Paper Industry
  • Ceramic Industry

Mono Layer Blown Film Plant in Ahmedabad

April 28, 2018 • Mrunal Ramanuj

  • Mono Layer Blown Film Plant in Ahmedabad
  • Mono Layer Blown Film Plant in Ahmedabad in India
  • Mono Layer Blown Film Plant in Ahmedabad Machine
  • Mono Layer Blown Film Plant in Ahmedabad Manufacturer
  • Mono Layer Blown Film Plant in Ahmedabad Export
  • Mono Layer Blown Film Plant in Ahmedabad Line
  • Mono Layer Blown Film Plant in Ahmedabad Unit
  • Mono Layer Blown Film Making Plant in Ahmedabad
  • Mono Layer Blown Film Plant in Ahmedabad Manufacturer Ocean Extrusions Pvt. Ltd.
  • #Mono #Layer #Blown #Film #Plant #in #Ahmedabad

MONO LAYER BLOWN FILM PLANT – MACHINE – PLANT – LINE

Mono Layer Blown Film Plant in Ahmedabad gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend

  • Blown Film Machinery
  • Monolayer blown film machine
  • Multilayer blown film machine
  • A-B-A blown film machine
  • Co extrusion blown film machine
  • 3 layer blown film machinery

The manufacture of Mono Layer Blown Film Plant in Ahmedabad for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of “legs”; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Mono Layer Blown Film Plant in Ahmedabad & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line

Mono Layer Blown Film Plant in Ahmedabad, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine Mono Layer Blown Film Plant in Ahmedabad, Plastic processing machinery, Multilayer.

Mono Layer Blown Film Plant in Ahmedabad, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Mono Layer Blown Film Plant

April 28, 2018 • Mrunal Ramanuj

 

 

 

  • Mono Layer Blown Film Plant
  • Mono Layer Blown Film Plant Machine
  • Mono Layer Blown Film Plant in India
  • Mono Layer Blown Film Plant Manufacturer
  • Mono Layer Blown Film Plant Line
  • Mono Layer Blown Film Plant Unit
  •  Mono Layer Blown Film Plant Export
  • Mono Layer Blown Film Plant on Google
  • Mono Layer Blown Film Plant on Youtube
  • Mono Layer Blown Film Plant Blog
  • Mono Layer Blown Film Plant on Facebook
  • Mono Layer Blown Film Plant in Ahmedabad
  • Mono Layer Blown Film Making Plant India
  • Mono Layer Blown Film Making Plant
  • #Mono #Layer #Blown #Film #Plant
plastic processing machine, plastic woven bag line, woven sacks, paper, aluminium foil coating india

plastic processing machine, blown film line, pp box strapping line, plastic woven bag line, woven sacks, paper, aluminium foil coating india

MONO LAYER BLOWN FILM PLANT – MACHINE – PLANT – LINE

Mono Layer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and Mono Layer Blown Film Plant as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

  • Blown Film Machinery
  • Monolayer blown film machine
  • Multilayer blown film machine
  • A-B-A blown film machine
  • Co extrusion blown film machine
  • 3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of “legs”; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Mono Layer Blown Film Plant & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & Mono Layer Blown Film Plant Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.
Mono Layer Blown Film Plant
Mono Layer Blown Film Plant, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, Mono Layer Blown Film Plant, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Mono Layer Blown Film Machine

April 28, 2018 • Mrunal Ramanuj

  • Mono Layer Blown Film Machine
  • Mono Layer Blown Film Machine Plant
  • Mono Layer Blown Film Machine Line
  • Mono Layer Blown Film Machine Unit
  • Mono Layer Blown Film Machine Export
  • Mono Layer Blown Film Machine in India
  • Mono Layer Blown Film Machine in Ahmedabad
  • Mono Layer Blown Film Machine on Youtube
  • Mono Layer Blown Film Machine on Google
  • Mono Layer Blown Film Machine Blog
  • Mono Layer Blown Film Machine India in Ahmedabad
  • Mono Layer Blown Film Making Machine
  • Mono Layer Blown Film Plant
  • #Mono #Layer #Blown #Film #Machine

MONO LAYER BLOWN FILM PLANT – MACHINE – PLANT – LINE

 

Mono Layer Blown Film Machine gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, Mono Layer Blown Film Machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

  • Blown Film Machinery
  • Monolayer blown film machine
  • Multilayer blown film machine
  • A-B-A blown film machine
  • Co extrusion blown film machine
  • 3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?Mono Layer Blown Film Machine?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of “legs”; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Mono Layer Blown Film Machine & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
Mono Layer Blown Film Machine, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine Mono Layer Blown Film Machine PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

Air Bubble Sheet Machine Manufacturer

April 20, 2018 • Mrunal Ramanuj
  • Air Bubble Sheet Machine Manufacturer
  • Air Bubble Sheet Machine Manufacturer in India
  • Air Bubble Sheet Machine Manufacturer Plant
  • Air Bubble Sheet Machine Manufacturer Line
  • Air Bubble Sheet Machine Manufacturer Unit
  • Air Bubble Sheet Machine Manufacturer Export
  • Air Bubble Sheet Machine Manufacturer in Ahmedabad
  • Air Bubble Sheet Machine Manufacturer India in Ahmedabad
  • #Air #Bubble #Sheet #Machine #Manufacturer

Air Bubble Sheet Machine Manufacturer

Air Bubble Sheet Plant such as Air Bubble Sheet Line, Air Bubble Sheet Making Machine, Bubble Sheet Making Machine, Bubble Film Making Machine, Cushion Film Making Machine, Air Bubble Film Machine and many more items.

Introduction of Air Bubble Sheet Machine Manufacturer;-

Air Bubble Sheet Machine Manufacturer, a flexible and transparent plastic sheting containig numerous small air pockets. The sheets offer cushioning and scratch protection far superior to packing paper and are used to protect items during shipping and storage. Bubble wrap is lightweight, waterresistant, reusablenon-scratching and is used for packing fragile items. It can be used to cushion medium to heavy weight products.

Air Bubble Sheet Machine Manufacturer are considered effective wrapping material in electronic, electrical, glassware, machinery, automobilespare parts, and many more industries. Air bubble sheet line material is soft in texture and the bubble like protruding features protect the products from scratch and damages during various packaging and shipping processes. Air bubble sheet plant is an affordable investment for producing safe stuffing material for brittle as well as heavy products. Air bubble sheet machine can produce sheets of various dimensions and lengt

This Air Bubble Sheet Machine Manufacturer,air bubble film extrusion machine,air bubble film machine
Polyethylene air cushion film (also called polyethylene bubble film), which is divided into two kind: ordinary polyethylene aircushion film and composite polyethylene air cushion film, is a kind of packing material which has been widely used at present.

Air Bubble Sheet Machine Manufacturer,air bubble film extrusion machine,air bubble film machine manufacturers also called air bubble film, bubble wrap, LLDPE air bubble film and so on. it is made of PE , the diameter of our bubble is 6mm,10mm,12mmm,20mm,25mm. the max width can be up to 1800mm. besides , we can made the bubble into 2 layer bubble film , 3 layers bubble film , 5 layers bubble film and other multilayer bubble film .so far , we have developed many lamitated bubble film ,like , EPE foam bubble film , woven bubble film ,kraft bubble film

 

 

Air Bubble Sheet Machine Manufacturer.

The offered product is widely demanded and appreciated by our clients for its brilliant features. Our dexterous professionals manufacture this product, using the finest quality raw material that is totally rust free. In ahead of their final dispatch, this is quality checked by our quality controllers on various parameters set by the industry. Clients can avail the offered range from us at market leading prices.

Features of Air Bubble Sheet Machine Manufacturer:

  • Excellent functionality
  • Consistent performance
  • High strength

Applications of Air Bubble Sheet Machine Manufacturer:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instruments
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

Air Bubble Sheet Machine Manufacturer. This sheet line is developed using top class material and progressive technology in tandem to universally verified standards. Moreover, our offered sheet line is highly appreciated by our clients for its high productivity with less power consumption.

Features of Air Bubble Sheet Machine Manufacturer:

  • Durable finish standard
  • Robust design
  • Long lasting

 

 

Air Bubble Sheet Machine Manufacturer. Our offered machine is manufactured keeping in mind the industry norms by using advance techniques. Furthermore, this machine is known for its user-friendly nature & performance. Offered machine is available in numerous specifications to choose from.

Features of Air Bubble Sheet Machine Manufacturer:

  • Application specific design
  • Long working life
  • Easy maintenance

Air Bubble Sheet Machine Manufacturer. The offered machine is available in various specifications in accordance to the customer’s needs. This machine is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered machine is examined under the direction of professionals to ensure the flawlessness.


Features of Air Bubble Sheet Machine Manufacturer:

  • Smooth functioning
  • Low maintenance
  • Durability

Application of Air Bubble Sheet Machine Manufacturer:

  • Electronic & Electrical Appliances
  • Glassware, Ceramic Products
  • Handicrafts
  • Pharmaceuticals
  • Scientific Instrumentsa
  • Engineering & Automobile Spare Parts
  • Fruits & Vegetables
  • Machinery Wrapping

 

 

  • Factory Add : – Ocean Extrusions Pvt Ltd
  • Plot No. 01, Survey No. 325,
  • B/h. Jalaram Saw Mill,
  • Kujad, Daskroi,
  • Ahemadabad, Gujarat,
  • INDIA – 382430
  • Corporate Office :-
  • Ocean Extrusions Pvt Ltd B-101,
  • First Floor, Galaxy Business Park,
  • Opp. Torrent Power Station,
  • Sardar Patel ( SP ) Ring Road,
  • Nikol, Ahmedabad, Gujarat,
  • INDIA – 382415.
  • Email: sales@oceanextrusions.com, oceanextrusions@gmail.com
  • Web: www.oceanextrusions.com, www.blownfilmline.in, www.oceanextrusionsmachine.com

 

Rotogravure Printing Machine Manufacturer

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine Manufacturer

Rotogravure Printing Machine

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant Manufacturer

Rotogravure Printing Machine Line Manufacturer

Rotogravure Printing Machine Unit Manufacturer

Rotogravure Printing Machine Export Manufacturer

Rotogravure Printing Making Machine

Rotogravure Printing Making Machine in India

Rotogravure Printing making Machine in Ahmedabad

#Rotogravure#Printing#Machine#Manufacturer#

 

 

Rotogravure Printing Machine Manufacturer

The Rotogravure Printing Machine Manufacturer is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine Manufacturer uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine Manufacturer

The layout of a Rotogravure Printing Machine Manufacturer follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine Manufacturer:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine Manufacturer:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

Rotogravure Printing Machine Manufacturer

Process advantages and applications of Rotogravure Printing Machine Manufacturer:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine Manufacturer

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Plant

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Plant

Rotogravure Printing Plant in India

Rotogravure Printing Plant Machine

Rotogravure Printing Plant in Ahmedabad

Rotogravure Printing Plant Line

Rotogravure Printing Plant Unit

Rotogravure Printing Plant Export

Rotogravure Printing Plant Manufacturer

Rotogravure Printing Plant Manufacturer in India

Rotogravure Printing Plant Manufacturer in Ahmedabad

Rotogravure Printing Making Plant

Rotogravure Printing Making Plant in India

Rotogravure Printing Making Plant in Ahmedabad

#Rotogravure#Printing#Plant#

 

Rotogravure Printing Plant

The Rotogravure Printing Plant is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Plant uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Plant

The layout of a Rotogravure Printing Plant follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Plant

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Plant:

Typical Rotogravure Printing Plant products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

 

Process advantages and applications of Rotogravure Printing Plant:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Plant

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687
 

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Machine in India

March 5, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine in India

Rotogravure Printing Machine Manufacturer in India

Rotogravure Printing Machine Manufacturer in Ahmedabad

Rotogravure Printing Machine Plant in India

Rotogravure Printing Machine

Rotogravure Printing Machine Line in India

Rotogravure Printing Unit Machine in India

Rotogravure Printing Machine Export in India

Rotogravure Printing Making Machine in India

Rotogravure Printing Making Machine in Ahmedabad

#Rotogravure#Printing#Machine#in#India#

 

 

Rotogravure Printing Machine in India

The Rotogravure Printing Machine in India is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine in India uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine in India

The layout of a Rotogravure Printing Machine in India follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine in India:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine in India:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed Rotogravure Printing Machine in India, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

 

Process advantages and applications of Rotogravure Printing Machine in India:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes Rotogravure Printing Machine in India an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Rotogravure Printing Machine in India

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Rotogravure Printing Machine

March 3, 2018 • Mrunal Ramanuj

Rotogravure Printing Machine

Rotogravure Printing Machine India

Rotogravure Printing Machine Manufacturer

Rotogravure Printing Machine in India

Rotogravure Printing Machine in Ahmedabad

Rotogravure Printing Machine Line

Rotogravure Printing Machine Plant

Rotogravure Printing Machine Unit

Rotogravure Printing Machine Export

Rotogravure Printing Making Machine

Rotogravure Printing Making Machine in India

Rotogravure Printing Making Machine in Ahmedabad

#Rotogravure#Printing#Machine#

 

Rotogravure Printing Machine

The Rotogravure Printing Machine is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

  • Films such as polyester, OPP, nylon, and PE
  • Papers
  • Carton board
  • Aluminum foil

The modern day Rotogravure Printing Machine uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure Printing Machine

The layout of a Rotogravure Printing Machine follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

  • Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
  • Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
  • Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
  • Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
  • Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

Process description of Rotogravure Printing Machine:

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

Applications of Rotogravure Printing Machine:

Typical gravure printed products include:

  • Food packaging
  • Wall paper
  • Wrapping paper
  • Furniture laminates
  • Paneling
  • Greeting cards
  • Magazines
  • a

The pressure of the roller, along with the capillary draw of the substrate, results in the direct transfer of ink from the cells in the printing cylinder to the surface of the substrate. As the printing roller rotates back into the ink pan, the printed area of the substrate proceeds through a dryer and onto the next printing unit, which is normally a different color or may be a varnish or coating.

Precise color to color registration is made possible via automatic side and length register control systems.

For a web-fed printing press, after each color has been printed and any coatings applied, the web is ‘rewound’ into a finished roll.

 

Process advantages and applications of Rotogravure Printing Machine:

The process offers the ability to transfer ink consistently, across a wide range of densities, and at high speeds, making it suitable for applications which require high image quality, such as publishing, packaging, labels, security print, and decorative printing.

The durable nature of the printing cylinders used makes gravure printing an ideal process for providing high quality print on very long or regularly repeating runs, delivering cost advantages over other processes.

Advantages of Rotogravure Printing Machine;-

The Rotogravure Printing Machine process is the most popular printing process used in flexible-packaging manufacturing, because of its ability to print on thin film such as polyester, OPP, nylon, and PE, which come in a wide range of thicknesses, commonly 10 to 30 micrometers.

Other appreciated features include of Rotogravure Printing Machine:

  • printing cylinders that can last through large-volume runs without the image degrading
  • good quality image reproduction
  • low per-unit costs running high volume production
  • hi-speed performance
  • low ink consumption

Disadvantages of Rotogravure Printing Machine:

Shortcomings of the gravure printing process include:

  • high start-up costs: hundreds of thousands of copies needed to make it profitable
  • rasterized lines and texts
  • long lead time for cylinder preparation, which is offsite as the techniques used are so specialized

 

Synthetic String Sutli Plant

March 3, 2018 • Mrunal Ramanuj

Synthetic String Sutli Plant

Synthetic String Sutli Plant India

Synthetic String Sutli Plant Machine

Synthetic String Sutli Plant Unit

Synthetic String Sutli Plant Export

Synthetic String Sutli Plant Line

Synthetic String Sutli Plant Manufacturer

Synthetic String Sutli Plant in Ahmedabad

Synthetic String Sutli Plant Manufacturer in India

Synthetic String Sutli Plant Manufacturer in Ahmedabad

Synthetic String Sutli Plant Machine in India

Synthetic String Sutli Plant in Ahmedabad

#Synthetic#String#Sutli#Plant#

 

Synthetic String Sutli Plant:

 

Ocean has developed “T” die string (sutli) plants/suitable for Synthetic String Sutli Plant. Due to ‘T’ die system, machine gives high production of sutli. Cheese winder is provided in different width of coil as per the requirement of coil width of 40mm, 50mm, 600mm,100mm, 150mm and 200mm. You can choose from screw die of 40mm, 50m, 60mm, 75mm. The principal application of plastic string (sulti) is for loose packaging, tieing the corrugated boxes, small packaging, tieing of bags as a substitute of jute sutli and twisted rope making

With Synthetic String Sutli Plant bulk production of plastic string can be done. Plastic string is applied for exterior loose packaging. Sutli machine or Synthetic String Sutli Plant is a reliable choice of machine that can produce twisted plastic strings and Synthetic String Sutli Plant which are then applied in the place of conventional jute strings. Synthetic String Sutli Plant produced from sutli plant are much stronger than other conventional materials. This equipment is a cost effective option for making large quantity of strings and line materials.

Features of Synthetic String Sutli Plant:

  • Sturdiness
  • Superior performance
  • Rigid construction

 

Synthetic String Sutli Plant products are long lasting and used in so many products. Even tiding or making net Synthetic String Sutli Plant or string is used more than other materials. The main benefit of plastic string is that it lasts long and having more strength.

Even plastic is cheap an easy available source and can be recycled.

We are manufacturing and supplying this Synthetic String Sutli Plant  or string plant. Our machines are capable of giving 100% output. We are manufacturing various models as per the client production output require. We can also able to provide T-die and blown film type string/ sutli plant which are suitable for PP synthetic jute. Auto chase winder is provided in different width of coil as per the requirements of coil width of 40 mm, 50 mm, 60 mm, 100 mm, 150 mm, and 200 mm. Options are valuable in screw die of 40 mm, 50 mm, 65 mm, 75 mm, and widely used for loose packaging, teeing of bags and twisted rope making.

 

Plant Model Screw Size (Mm) Screw Size L7d Feed Section Type Die Width (Mm) No. Of Station Winder Max Production Capacity Total Connected Load Polymer To Be Processed Dimensions Of Plant (Feet)
  Ratio T W II luvl Kg/hr. (Kw)   L W H
OES 40 40 28: 1 Smooth Feed 250 8 20 25 PP 40 8 8
OES 50 50 28: 1 Smooth Feed 350 12 35 31 PP 45 8 8
OES 65 65 28: 1 Smooth Feed 500 18 60 43.5 PP 60 10 8
OES 75 75 28: 1 Smooth Feed 700 24 100 66 PP 70 12 10
OES 90 90 28: 1 Smooth Feed 900 36 140 91 PP 90 20 10

 

Features of Synthetic String Sutli Plant:

  • Optimum product costing due to high productivity with less power consumption.
  • Nitrides screw and barrel made out from special nitro alloy steel for long life and trouble free operations.
  • Helical gear box with inbuilt thrust bearing.
  • Manual lever type screen changer.
  • Uniquely designed ‘T’ die ensuring uniform flow distribution.
  • Cheese winders with different size winding options like 2.5″, 4″, 6″, 8″ etc.
  • Microprocessor based PID temperature controller.
  • Synchronization of all AC motors.

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Plastic Reprocess Plant

March 1, 2018 • Mrunal Ramanuj

Plastic Reprocess Plant

Plastic Reprocess Plant India

Plastic Reprocess Plant Machine

Plastic Reprocess Plant Manufacturer

Plastic Reprocess Plant Manufacturer in India

Plastic Reprocess Plant Manufacturer in Ahmedabad

Plastic Reprocess Plant Line

Plastic Reprocess Plant Unit

Plastic Reprocess Plant Export

Plastic Reprocess Making Plant

Plastic Reprocess Making Plant in India

Plastic Reprocess Making Plant in Ahmedabad

Plastic Reprocess Plant Machine Manufacturer

Plastic Reprocess Plant Machine Manufacturer in India

Plastic Reprocess Plant Machine Manufacturer in Ahmedabad

#Plastic#Reprocess#Plant#

 

Plastic Reprocess Plant

 

Plastic Reprocess Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Reprocess Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Reprocess Plant includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to Plastic Reprocess Plant is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastic Reprocess Plant have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Reprocess Plant:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the Plastic Reprocess Plant of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Reprocess Plant:

PET

Main article: Plastic Reprocess Plant

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this Plastic Reprocess Plant that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Application of Plastic Reprocess Plant:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Reprocess Plant:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Reprocess Plant

This Plastic Reprocess Plant is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Reprocess Plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Reprocess Plant:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Making Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Reprocess Making Machine

Plastic Reprocess Making Machine India

Plastic Reprocess Making Machine Manufacturer

Plastic Reprocess Making Machine Plant

Plastic Reprocess Making Machine Line

Plastic Reprocess Making Machine Unit

Plastic Reprocess Making Machine Export

Plastic Reprocess Making Machine Manufacturer in India

Plastic Reprocess Making Machine Plant in India

Plastic Reprocess Making Machine Manufacturer in India

Plastic Reprocess Making Machine Manufacturer in Ahmedabad

Plastic Reprocess Making Machine in Ahmedabad

#Plastic#Reprocess#Making#Machine#

 

Plastic Reprocess Making Machine

 

Plastic Reprocess Making Machine such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Reprocess Making Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Reprocess Making Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Reprocess Making Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of Plastic Reprocess Making Machine streams and their separation/purification.

Applications of Plastic Reprocess Making Machine:

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this Plastic Reprocess Making Machine that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The Plastic Reprocess Making Machine thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

 

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Reprocess Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Reprocess Making Machine

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

 

Plastic Extruder – Plastic Reprocess Making Machine

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by Plastic Reprocess Making Machine is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Reprocess Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Reprocess Machine in India

March 1, 2018 • Mrunal Ramanuj

Plastic Reprocess Machine in India

Plastic Reprocess Machine in India Manufacturer

Plastic Reprocess Machine in India Line

Plastic Reprocess Machine in India Unit

‘Plastic Reprocess Machine in India Plant

Plastic Reprocess Machine in India Unit

Plastic Reprocess Machine in India Export

Plastic Reprocess Making Machine in India

Plastic Reprocess Manufacturer Machine in India

Plastic Reprocess Machine in Ahmedabad

Plastic Reprocess Making Machine in Ahmedabad

Plastic Reprocess Manufacturer Machine in Ahmedabad

#Plastic#Reprocess#Machine#in#India#

Plastic Reprocess Machine in India

 

Plastic Reprocess Machine in India such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Reprocess Machine in India is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Reprocess Machine in India includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastic Reprocess Machine in India have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Reprocess Machine in India:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Reprocess Machine in India:

PET

Main article: Plastic Reprocess Machine in India

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The Plastic Reprocess Machine in India thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Reprocess Machine in India

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Reprocess Machine in India:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Reprocess Machine in India

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Reprocess Machine in India and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and Plastic Reprocess Machine in India is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Reprocess Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

 

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

Plastic Recycling Making Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Making Machine

Plastic Recycling Making Machine India

Plastic Recycling Making Machine Manufacturer

Plastic Recycling Making Machine Manufacturer India

Plastic Recycling Making Machine Plant

Plastic Recycling Making Machine Line

Plastic Recycling Making Machine Unit

Plastic Recycling Making Machine Export

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Manufacturer in Ahmedabad

#Plastic#Recycling#Making#Machine#

 

 

Plastic Recycling Making Machine

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Making Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Making Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Making Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Making Machine:

PET

Main article: Plastic Recycling Making Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

 

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification of Plastic Recycling Making Machine:

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Making Machine

This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. Plastic Recycling Making Machine and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Making Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Machine in India

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Machine in India

Plastic Recycling Machine in India Manufacturer

Plastic Recycling Machine in India Plant

Plastic Recycling Machine in India Line

Plastic Recycling Machine in India Unit

Plastic Recycling Machine in India Export

Plastic Recycling Making Machine in India 

Plastic Recycling Making Machine India 

Plastic Recycling Making Machine in Ahmedabad

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine manufacturer India

Plastic Recycling Machine Manufacturer in Ahmedabad 

#Plastic#Recycling#Machine#in#India#

 

 

Plastic Recycling Machine in India

 

Plastic Recycling Machine in India such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Machine in India is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Machine in India includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Machine in India:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Machine in India:

PET

Main article: Plastic Recycling Machine in India

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

 

Application of Plastic Recycling Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Plastic Recycling Machine in India

This Plastic Recycling Machine in India is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE Plastic Recycling Machine in India are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Machine in India:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com
Categories: Extrusion Machinery Manufacturer india Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Plastic Recycling Machine

March 1, 2018 • Mrunal Ramanuj

Plastic Recycling Machine

Plastic Recycling Machine India

Plastic Recycling Machine Manufacturer

Plastic Recycling Machine in India

Plastic Recycling Machine Manufacturer in India

Plastic Recycling Machine Plant

Plastic Recycling Machine Line

Plastic Recycling Machine Unit

Plastic Recycling Machine Export

Plastic Recycling Making Machine

Plastic Recycling making Machine in India

Plastic Recycling Making Machine in Ahmedabad

Plastic Recycling Machine Manufacturer in Ahmedabad

Plastic Recycling Machine in Ahmedabad

#Plastic#Recycling#Machine#

 

Plastic Recycling Machine

 

Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.

Plastic Recycling Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of  plastic pollution.

Plastic Recycling Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags.

Another barrier to recycling is the widespread use of  dyes, fillers , and other additives in plastics. The polymer is generally too viscous  to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often.

The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability.

The use of biodegradable plastic is increasing.

Other processes of Plastic Recycling Machine:

A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification.

Applications of Plastic Recycling Machine:

PET

Main article: Plastic Recycling Machine

Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET).

RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale.

One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation.

 

HDPE

Plastic, high-density polyethylene ( HDPE ) is a commonly recycled plastic. It is typically down cycled  into plastic lumber , tables, roadside curbs, benches, truck cargo liners, trash receptacles, stationery (e.g. rulers) and other durable plastic products and is usually in demand.

PS

The resin identification code symbol for polystyrene

Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. As a result, manufacturers cannot obtain sufficient scrap. Expanded polystyrene (EPS) scrap can easily be added to products such as EPS insulation sheets and other EPS materials for construction applications. When it is not used to make more EPS, foam scrap can be turned into clothes hangers, park benches, flower pots, toys, rulers, stapler bodies, seedling containers, picture frames, and architectural molding from recycled PS.

  • PET
  • HDPE
  • EPS

Tags ;-

  • Plastic Recycling Plant such as Plastic Reprocess Plant,
  • Plastic Waste Recycling Plant,
  • Plastic Recycling Machine,
  • Raffia Waste Reprocess Plant,
  • Extruder For Waste Plastic Recycling,

Application of Plastic Recycling Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting agglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

Ocean Extrusions Pvt Ltd offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer.

Technical Specification

Plant
Model
Screw Size (mm) Screw Size L7d Ratio Feed Section Type MAX PROD CAPACITY (KGS/HOUR) TOTAL CONNECTED LOAD (KW W/OGRINDER) POLYMER MAIN DRIVE (HP) DIMENSION
OF PLANT
(FEET)
L M H
OESRP100 80 24:1 Smooth Feed 100 36 PET 25 40 6 18
OESRP100 90 Smooth Feed 150 PET 40 45 6 20
OESRP100 100 Smooth Feed 200 PET 50 45 6 20

 

Plastic Extruder – Re Process Plant

This Plastic Recycling Machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process.

Plastic Recycling Machine is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this Plastic Recycling Machine stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well.

Application of Plastic Recycling Machine:

  • Material: All kinds of plastics waste.
  • Online Force Feeding Film Trim, Tape Trim without cutting aglometer.
  • For the plastic waste of higher moister, heavy printing, heavy contamination.

 

  • MAIN EXTRUDER:

 

Screw Dia.                             :  90 mm

L:D Ratio                               :  24:1

Screw Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Barrel Material                        :  EN 41 B Nitro alloy steel duly gas nitride

Gearbox                                :  Helical gearbox with heavy duty thrust bearing

Drive                                    :  40 HP AC Motor (SIEMENS) With A.C Inverter Drives

Heating Zones                        :  5 Zones

Heating Loads                         :  22 kW

Structure                               :  MS fabricated heavy-duty structure made from

Angles, channels and covered with sheet.

  • HYDROLIC SCREEN CHANGER:

Heating load   : 7.5 KW

Motor            : 3.0 HP

  • DIE:

One Die for Reprocess with heaters.

Heating Zone                         :  1.

Heating Load                          :  2 KW.

 

  • DIE FACE CUTTER:

Motor driven by 2 HP AC Motor. (SIEMENS) With A.C Inverter Drives

  • WATER TANK:

One cooling tank made out from SS Sheet

  • SEPARATOR :

One Separator motor driven by 5 HP AC Motor.

  • ELECTRIC CONTROL PANEL:
  • Uniquely designed control panel with powder coated body.

Temperature Controllers : Microprocessor based P.I.D. Temp. Controllers                                                             (OMRON / ALFA/ MULTI SPAN MAKE)

ALL AC FREQUECY DRIVE: MITSUBISHI MAKE.

 

MCB                                      : All standard make MCBS in line with every heating zone

Other electrical outfits     : A Meter, Contactors, Inline choke for standard code wiring with PVC conduits channel framing.

FULLY MASTER SYNCRONISE PLANT.

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com

PP TQ Blown Film Machine Manufacturer

February 28, 2018 • Mrunal Ramanuj

PP TQ Blown Film Machine Manufacturer

PP TQ Blown Film Machine Manufacturer India

PP TQ Blown Film Machine Manufacturer Plant

PP TQ Blown Film Machine Manufacturer Line

PP TQ Blown Film Machine Manufacturer Unit

PP TQ Blown Film Machine Manufacturer Export

PP TQ Blown Film Machine Manufacturer in Ahmedabad

PP TQ Blown Film Machine Manufacturer in India

#PP#TQ#Blown#Film#Machine#Manufacturer#

 

 

 

PP TQ Blown Film Machine Manufacturer

This extensive range of PP TQ Blown Film Machine Manufacturer include well-manufactured blown film machines that are used for various purposes. Its application areas include food product packaging, hosiery, confectionery, bakery packing, flowers packing, garments packing, high clarity general packaging films, lamination film, blood bags and metallizable films etc. We are manufacturing these film plants in different widths depending upon its application area. Our PP TQ Blown Film Machine Manufacturer and machineries have diverse applications and supreme quality products made at par to the international standards.

This most demanded PP TQ Blown Film Machine Manufacturer are to produce various combinations of PP and PE grades as per customer’s specific requirements. The lines are capable to process polyproplene(PP) for narrow width bags a Double Die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are quite energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Two layer configurations are also available, PP TQ Blown Film Machine Manufacturer are available with Rotating die.

This PP TQ Blown Film Machine Manufacturer incorporate advanced features like-grooved feed barrel, barrier screw, dosing system, Liquid PIB dosing system, manual as well as automatic screen changer, Rotating Die/ platform , automatic bubble cage, Surface and center winders , Auto tension control, Corona treaters etc. for longer life, higher productivity and better quality.

Assisted by a team of experienced engineers, we have been able to manufacture, supply and export PP TQ Blown Film Machine Manufacturer. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

We “Ocean Extrusions Pvt. Ltd.” are a recognized manufacturer and supplier of an exclusive array of PP-TQ Blown Film Plant. This plant is provided with variable screw diameters. It is manufactured under the supervision of skilled technocrats using high quality components as per the international quality standards. The offered PP-TQ Blown Film Plant is known for giving excellent output. It is very simple to operate & maintain and is offered at market leading prices.

 

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP TQ Blown Film Machine Manufacturer can be chosen with moderate to higher production capacity. PP-TQ blown film line is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

We feel proud to introduce ourselves as the leading manufacturer and supplier of premium class range of PP Blown Film Plant. The plants we engineer at our end are fabricated as per the defined industry standards and norms, making use of finest grade metals, components and materials. Clients demand these plants for their robust construction, rust proof finishing and longer functionality.

 

Today  for growth of PP TQ Blown Film Machine Manufacturer:

  • Growing demand in flexible packaging
  • Excellent optical properties viz. clarity & gloss
  • Better mechanical properties viz. stiffness
  • Good barrier properties
  • Cost effective packaging solution

 

Good Process Ability of PP TQ Blown Film Machine Manufacturer:

  • Good clarity and gloss
  • Good stiffness
  • Narrow sealing window and low seal strength
  • Low impact properties
  • Lower tear resistance
  • Higher stiffness

 

Characteristics of PP TQ Blown Film Machine Manufacturer:

  • Higher Crystallization Formation of Spherulites, as the melt solidifies.
  • Slower Crystallization Rates.
  • Possible to Get Smaller Size.
  • Spherules, by Quenching of the Film.

 

Advantages of PP TQ Blown Film Machine Manufacturer:

  • Low Capital
  • Low Space Requirement
  • Lower Operating Cost
  • Less Demanding Operating Skills
  • Ease in Changing the Width/Thickness of Film
  • Tubular film is an added Advantage in Manufacturing of Pouches/Bags
  • Soft in Feel
  • Lower Sealing Temperature
  • Good dart impact and tear Strength
  • Good Process ability
  • High melt Strength
  • Good Gloss and Clarity
  • Lower melting Temperature, Hence Lower Processing Conditions
  • Lower Sealing Temperatures
  • Better Sealing Characteristics
  • Better Mechanical Properties

 

 

Typical Applications of PP TQ Blown Film Machine Manufacturer:

  • Packaging of Textiles / Food / Other Commodities Liners
  • Carry Bags
  • Lamination Films (See-Through Pouch)
  • Packaging on Form Fill Seal (FFS) Machines
  • Stationery Items (Photo Albums /Document Holders)
  • Garment & Textile Packing
  • Hosiery Product Packing
  • Backery Product Packing
  • Vegetable & Fruit Packing

 

OPTIONAL ATTACHMENTS of PP TQ Blown Film Machine Manufacturer:

  • Hopper Loader
  • Hopper Loader With Dryer
  • Continues Die Rotation
  • Corona Treated
  • Safety Chucks
  • Air Shaft
  • Tapper Tension Controller
  • Bimetallic Screw & Barrel Set
  • Melt Pressure Indicator

 

Features of PP TQ Blown Film Machine Manufacturer:

  • Optimum product costing due to high productivity with less power consumption
  • Nitride screw and barrel made out from special nitro alloy steel
  • Long life and trouble free operations
  • Helical gear box with inbuilt thrust bearing
  • Specially designed spiral type die ensuring uniform flow distribution
  • Aluminum casted water chamber
  • Microprocessor based PID temperature controller
  • Synchronization of all AC motors
  • Rigid design, Hassel free functioning and Long service life

Extra Parts & Accessories of PP TQ Blown Film Machine Manufacturer:

  • Continuous 360° Rotating Die
  • Manual Lever Type Screen Changer
  • Corona Treater
  • Motorized up / down Sizer

Applications of PP TQ Blown Film Machine Manufacturer:

  • Garment & Textile Packing
  • Hosiery Product Packing
  • Bakery Product Packing
  • Vegetable & Fruit Packing
  • PP Lamination Pouch Film
  • Hopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products

 

PP TQ Blown Film Machine Manufacturer

PP / TQ  Blown film plant

Monolayer Blown Film Plant

Blown Film plant

PP Single Die Blown Film plant

Plastic Blowing Line

PP Blown Film Plant

HM LD Film Machine

PP Tubing Film Plant

Grooved Plastic Feed  Plant

HDPE Slit Film plant

Two Layer & Three Layer Film Plant

Multilayer Blown Film Plant

Industrial PP Film Plant

Blown Film Plants with Grooved Barrel

TQ Film plant

PP Printed Films Plants

 

PP TQ Blown Film Machine Manufacturer

Polypropylene is a popular ingredient that is applied to produce transparent and light weight packaging films. PP Tubing Film Plant can be chosen with moderate to higher production capacity. PP blown film Machine is used in majority in textile and food industries in majority. PP TQ Blown Film Machine Manufacturer is equipped with suitable components including latest gear box and motor for reducing power consumption and increasing the production capacity as well.

 

Screw Size (mm) Screw Size L/d Ratio Feed Section Type MAX LAYFLAT WIDTH (INCH) MAX PRODUCTION CAPACITYKG/HR. TOTAL CONNECTED LOAD(KW) MAIN DRIVE (HP) MAIN DRIVE (HP) DIMENSION OF PLANT (FEET)
L W H
40 281 Smooth Feed 1.5 TO 12 25 18 5 5 20 5 9
45 281 Smooth Feed 3 TO 16 10TO30 21 7 7 23 6 10
50 281 Smooth Feed 4 TO 18 15TO40 25 10 10 25 6 10
55 281 Smooth Feed 6 TO 24 40 TO 50 30 12.5 12.5 25 6 12
65 281 Smooth Feed 6 TO 24 25 TO 60 32 15 15 28 8 14
65 281 Smooth Feed 10 TO 30 60 32.5 15 15 28 8 14
50 281 Smooth Feed 8 TO 24 80 37 20 20 28 8 14

 

OCEAN EXTRUSIONS PVT LTD.

Corporate Office

B-101 First Floor ,Galaxy Business Park ,
Opposite Torrent Power Sub-Station ,
SP Ring Road ,Nikol
Ahmedabad – 382415

Workshop

Plot No 1. Survey No 325, B/H.
Jalaram Saw Mill, Kujad, Taluka – Daskroi,
Ahmedabad – 382430

Mobile

[+91] 97243 25400
[+91] 97243 25401
[+91] 97243 25403
[+91] 97243 25404
[+91] 97140 00687

Telephone

[+91] 8690 79 4554

Fax

[+91] 79 3299 4554

E-mail

sales@oceanextrusions.com
export@oceanextrusions.com