Skip to Content

Category: Plastic Recycling Washing Line

Plastic Waste Recycling Machine Line

December 2, 2017 • Mrunal Ramanuj

Plastic Waste Recycling Machine Line

Plastic Waste Recycling Machine Line India

Plastic Waste Recycling Machine Line Exporter

Plastic Waste Recycling Machine Line Manufacturer

Plastic Waste Recycling Machine Line Plant

Plastic Waste Recycling Machine Line Unit Plant

Plastic Waste Recycling Machine Line in India

Die Face Cutter Recycling Plant

Plastic Granules Making Machine

Plastic Reprocess Granules Making Machine

Plastic Processing Machine

Plastic Recycling Machine India

Plastic Extrusion Machine

Plastic Dana Machinery

Waste Processing Granules Making Machine 

Plastic Granules Machine Manufacturer

Plastic Dana Plant

Plastic Recycling Granules Making Machinery

Ocean Extrusions Pvt Ltd, Ahmedabad is Manufacturer and Exporter of Plastic Extrusions Machinery Like Monolayer Blown Film Plant, Two layer Blown Film Plant, Multilayer Blown Film Plant, PP/HDPE Box Strapping Line, PET Box Strapping Line, Synthetic String (Sutli) Plant, PP Monofilament Plant, PET Monofilament Plant, Raffia Tape Stretching Line, Air Bubble Sheet Plant, Extrusion Coating Lamination Plant, PP-TQ Blown Film Plant, Plastic Recycling Machine, Fully Auto Die Face Cutter Recycling Machine, Rotogravure Printing Machine, Adhesive Coating Lamination Machine, LD PP Waste Washing Line, PET Waste Washing Line, Extrusion Cast Stretch Film Line, PU Tubing Plant, Slitting Rewinding Machine, Coma Paper Coating Machine

We are Exporting our Machine in Different Countries like Indonesia, Brazil, Nigeria, Bangladesh, Russia, Mexico, Japan, Ethiopia, Philippines, Viet Nam, Egypt, Iran, Germany, Turkey, Thailand, U.K., France, Italy, Tanzania, South Africa, Myanmar, South Korea, Colombia, Kenya, Spain, Argentina, Sudan, Uganda, Algeria, Iraq, Poland, Canada, Morocco, Afghanistan, Saudi Arabia, Peru, Malaysia, Uzbekistan, Nepal, Ghana, North Korea, Australia, Sri Lanka, Syria, Zambia, Zimbabwe, Senegal, South Sudan, Tunisia, Belgium, Greece, Portugal, Belarus, United Arab Emirates, Serbia, Switzerland, Honduras, Jordan, Lebanon, Singapore, Denmark, Liberia, New Zealand, Kuwait, Georgia, Albania, Qatar, Mauritius, Fiji, Cyprus, Bhutan, Maldives, Etc.


Plastic Recycling Plant such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine.


  • Longer functional life
  • Rugged in construction
  • Operationally fluent


L7d ratio
Prod capacity
(kw w/ogrinder)
Polymer Main
Oesrp100 80 24:01:00 Smooth feed 100 36 Pet 25 40 6 18
Oesrp100 90 0 Smooth feed 150 0 Pet 40 45 6 20
Oesrp100 100 0 Smooth feed 200 0 Pet 50 45 6 20


Factory Add :

Ocean Extrusions Pvt Ltd
Plot No. 01, Survey No. 325,
B/h. Jalaram Saw Mill,
Kujad, Daskroi,
Ahmedabad, Gujarat, INDIA – 382430

Corporate Office : 
Ocean Extrusions Pvt Ltd
B-101, First Floor,
Galaxy Business Park,
Opp. Torrent Power Station,
Sardar Patel ( SP ) Ring Road,
Nikol, Ahmedabad, Gujarat, INDIA – 382415.



Mobile: +91-97243 25400/01/03/04, +91-971400 0686/87, +91-92272 06356, +91-86907 94554

PE Extrusion Lamination Coating Machine PE coating machine, PE film laminating machine

February 11, 2017 • Mrunal Ramanuj

PE Extrusion Lamination Coating Machine PE coating machine, PE film laminating machine 


High density polyethylene of HDPE woven sacks have become a versatile commodity in the
packaging industry. Introduced for the first time in India during the year 1969 it has over the years
replaced the conventional jute bags to a large exte`nt. HDPE sacks have an edge over the
conventional jute sacks in the sense that the former are light in weight, strong and attractive.
These sacks are immune to the effect of corrosion, decay, moisture, atmosphere, rats, rodents,
moths and insects. Being superior in quality and economic to the traditional jute material, these
modern sacks have gradually captured a large market for packing fertilizers, chemicals, food
stuffs, animal foods, oil cakes etc. Sacks made of HDPE are laminated with low density
polyethylene inside it. This gives protection against moisture, air and the material packed cannot
penetrate out of the sack.

Market Potential:
The primary requirement of sacking in India is for packaging of fertilizers, pesticides, chemicals,
oil seeds and good grains. The total demand at present is estimated to be around 3000 million
sacks per annum. The current sales of HDPE resins for woven sacks is around 20,000 M.T.A. or
approximately 154 million sacks. For jute sacking the sales is around 12 lakh tones per annum or
2460million sacks. This still leaves a deficit of about 400 million sacks. Therefore, HDPE sacks
rather than competing with jute sacks would on the contrary supplement the existing deficit in

The main consumer for HDPE woven sacks in the N.E. Region at present is the Hindustan
Fertilizer Corporation Ltd., (HFC), Namrup. The HFC (Stage-I, II & III) has at present an installed
capacity of around 10,00,000 tonnes of Urea and Ammonia Sulphate per annum. On an average
the actual production works out to about 80% of the installed capacity or to about 8,00,000 tonnes
of Ammoniam Sulphate and Urea per annum. The fertilizer produce is packed in bags or sacks in
the quantity of 50 Kgs. or 0.05 tonnes per bag or sack. On this basis the total requirement of bags
or sacks is 160,00,000 Nos. per annum. Out of this requirement more than 50% (80,00,000 Nos.)
is HDPE woven sacks.

At present there is no unit manufacturing laminated HDPE woven sacks in Assam or in any part
of the N.E. Region. As a result the full requirement of laminated HDPE woven sacks are supplied
by manufacturer’s from outside the state and region. Thus 2 – 3 Nos. of laminated HDPE woven
sacks manufacturing units can come up preferably in the states of Assam and Nagaland.

Plant Capacity:
The production basis for a typical tiny unit would be as under:

Working hours/day : 8 (1 shift)
Working days in a year : 300
Annual Production capacity : 7,00,000 Nos.of laminated
HDPE woven sacks.pantai kuta bali

The unit has been assumed to operate at 70%, 80% and 90% of its installed capacity in the first,
second and third year and onwards of its operation.

Raw Material:
The main raw material required for manufacturing laminated HDPE woven sacks is HDPE of GF
– 7745 F grades. The other chemicals required are LDPE (18 LA 060 grade) and colour for
printing. LDPE is used in the laminating process or in the extraction coating process in providing
a lining of LDPE to the woven material. The colour is utilized in printing the name of the unit etc.
whose product is to be packed. The annual requirement of HDPE, LDPE and colour at 100%
capacity utilization is as follows:
HDPE : 80,000 Kg.
LDPE : 23,000 Kg.
Colour : Rs. 0.50 per Kg. HDPE requirement




Plastic Recycling Washing Line

January 26, 2017 • Mrunal Ramanuj

Plastic Recycling Washing Line

Ocean Extrusions Pvt Ltd is a leading plastic Extrusion machinery Manufacturer & Exporter. Our sophisticated Engineering team and management team designed, tested, and constantly improved our Plastic Recycling Machinery.

The designs of the machinery are optimized based on invaluable feedback from experienced plastic recycling professionals. Each piece of component is meant for better and safer user experience and efficient production. We have sold equipment to domestic and international companies in the Plastic Industry.

By the processing of PE/PP film washing line, the dirties such as sands, soil and mud can be washed out well. And the clean films can be used for plastic pelletizing directly.

1, high working efficiency, less energy consumption; high automation, less man power.

2, heavy crusher with 10pcs rotary blades efficient cutting

3, By multiple friction washing and rinsing washing, the dirty such oil contamination and mud can be washed out fully.

4, reasonable flowchart design for convenient operation and lower maintenance cost.

5, whole solution for sewage water recycling.

6, the rinsing tank, screw feeders, pipelines are made of stainless steel.

At present, we have the standard models with capacities from 200kg/hr to 2000kg/hr for the plastic pe/pp film washing line, But the final proposal maybe some different because of the different materials conditions.

Product capacity 300kg/h 500kg/h 1000kg/h 1500kg/h
Workshop(L*W*H) 40m*7.5m*6m 42m*10m*6m 70m*12m*6m 75m*15m*6m
Needed worker 3-4 persons 5-6persons 7-8persons 10-12persons
Water supply

(recycle use)

2-3ton/h 3-5ton/h 7-10ton/h 10-15ton/h
Final product Moisture: max 1%

Bulk density: 0.3G/CM3

Particle size: 10-18mm

Metal content: max.20ppm

Floatable contamination: less than 200ppm

Total impurity: 100-320ppm

© 2018 All rights reserved.