Biodegradable Bag Making Machine

June 11, 2018 • Mrunal Ramanuj

Manufacturer By Ocean Extrusions Pvt. Ltd.,

Biodegradable Bag Making Machine
Biodegradable Bag Making Machine is defined as the process in which two or more plastic materials are extruded through a single die. In this process, two or more orifices are arranged in such a manner that the conjoint merging and welding of the extrudates takes place and before chilling, a laminar structure forms. In Biodegradable Bag Making Machine, a separate extruder is used to fed every material to the die but the orifices can be arranged in such a manner that each extruder provides two or more plies of the same material.

Feature of Biodegradable Bag Making Machine :-
Biodegradable Bag Making Machine, an excellent solution for maximum cost-effectiveness, provides following benefits:
Increasing flexibility and shortening production schedule, particularly for special formulations.
High throughput.
Reducing operating costs thanks to less power, fewer operating resources and less maintenance.
Use of more favourably priced raw materials instead of finished compounds, lessing capital tied up in materials.
Increasing number of potential raw material suppliers.
Lower production cost.

For this process, OEPL must have similar melt viscosities to sustain a laminar flow. All the viscosity differences may be more or less tolerable, according to the material location inside the composite structure along with the layer’s thinness
Minor differences in physical properties are responsible for making a combination desirable, but these differences are also responsible for making the combination incompatible

Advantages Of Biodegradable Bag Making Machine:-
According to various internationally established and popular companies that are using the co-extrusion process continuously in their production procedures, there are a number of advantages of this process. Some of these advantages are listed below:
High quality mono-layer extrusion coatings in larger varieties of line speeds and widths
Use of lower cost materials for filling purpose, assists in saving on the amount of qualitative resins
Capability of making multi-layer as well as multi-functional structures that too in a single pass
Reduction in the number of steps required in general extrusion process
Provides targeted performance with the use of definite polymers in particular layers
Reduction in setup and trim scrap
Potential for use of a recycle layer